Page 136 - 摩擦学学报2025年第10期

第 10 期 SU Yongyao, et al.: Exploring the Impact and Mechanism of CrN Interlayer on the Tribological ··· 1533

cathode arc[J]. Thin Solid Films, 2009, 517(17): 4845–4849. doi: 10. Tribological Behavior of Cr 3 C 2 -NiCr/DLC Duplex Coating with
1016/j.tsf.2009.03.038. High Load-Bearing and Wear Resistance[J]. Tribology, 2022, 42(4):
[18] Daub K, Van Nieuwenhove R, Nordin H. Investigation of the impact 751–763. doi: 10.16078/j.tribology.2021274.
of coatings on corrosion and hydrogen uptake of Zircaloy-4[J]. [28] Liao Wanneng, Yang Haoqin, Yi Cheng, et al. Effect and
Journal of Nuclear Materials, 2015, 467: 260–270. doi: 10.1016/j. mechanism of cold rolling and aging process on microstructure and
jnucmat.2015.09.041. properties of columnar grain C70250 copper alloy[J]. Materials
[19] Lee D B, Lee Y C, Kwon S C. High temperature oxidation of a CrN Science and Engineering: A, 2022, 833(3): 142577. doi: 10.1016/j.
coating deposited on a steel substrate by ion plating[J]. Surface and msea.2021.142577.
Coatings Technology, 2001, 141(2-3): 227–231. doi: 10.1016/ [29] Zheng J, Zhang S H, Wu P, et al. Microstructures and mechanical
S0257-8972(01)01238-5. properties of duplex-treated composite ceramic coatings with and
[20] Liu Junkai, Hao Zhe, Cui Zhexin, et al. Investigation of the without compound layer[J]. Ceramics International, 2015, 41(2):
oxidation mechanisms of superlattice Cr-CrN/TiSiN-Cr multilayer 2519–2526. doi: 10.1016/j.ceramint.2014.10.074.
coatings on Zircaloy substrates under high-temperature steam [30] Martini C, Ceschini L, Casadei B, et al. Dry sliding behaviour of
atmospheres[J]. Corrosion Science, 2021, 192: 109782. doi: 10. hydrogenated amorphous carbon (a-C: H) coatings on Ti-6Al-4V[J].
1016/j.corsci.2021.109782. Wear, 2011, 271(9–10): 2025–2036. doi: 10.1016/j.wear.2011.01.
[21] Vidakis N, Antoniadis A, Bilalis N. The VDI 3198 indentation test 045.
evaluation of a reliable qualitative control for layered compounds[J]. [31] Wang Huacai, Yang Dawei, Cheng Huanlin, et al. Chemical
Journal of Materials Processing Technology, 2003, 143-144(1): interaction layer between uranium oxide fuel pellet and zirconium
481–485. doi: 10.1016/S0924-0136(03)00300-5. alloy cladding in pressurized water reactor[J]. Nuclear Techniques,
[22] Heinke W, Leyland A, Matthews A, et al. Evaluation of PVD nitride 2023, 46(9): 103–110 (in Chinese) [王华才, 杨大伟, 程焕林, 等. 压
coatings, using impact, scratch and Rockwell-C adhesion tests[J]. 水堆燃料棒UO 2 燃料芯块与锆合金包壳化学相互作用层研究[J].
Thin Solid Films, 1995, 270(1–2): 431–438. doi: 10.1016/0040-6090 核技术, 2023, 46(9): 103–110]. doi: 10.11889/j.0253-3219.2023.hjs.
(95)06934-8. 46.090602.
[23] Röder H, Hahn E, Brune H, et al. Building one- and two- [32] Liang J H, Milne Z, Rouhani M, et al. Stress-dependent adhesion
dimensional nanostructures by diffusion-controlled aggregation at and sliding-induced nanoscale wear of diamond-like carbon studied
surfaces[J]. Nature, 1993, 366: 141–143. doi: 10.1038/366141a0. using in situ TEM nanoindentation[J]. Carbon, 2022, 193: 230–241.
[24] Bernard B, Bianchi L, Malié A, et al. Columnar suspension plasma doi: 10.1016/j.carbon.2022.03.030.
sprayed coating microstructural control for thermal barrier coating [33] Hazan E, Sadia Y, Gelbstein Y. Characterization of AISI 4340
application[J]. Journal of the European Ceramic Society, 2016, corrosion products using Raman spectroscopy[J]. Corrosion Science,
36(4): 1081–1089. doi: 10.1016/j.jeurceramsoc.2015.11.018. 2013, 74: 414–418. doi: 10.1016/j.corsci.2013.05.002.
[25] Chang C L, Huang Chun-Hong, Lin C Y, et al. Mechanical [34] Maslar J E, Hurst W S, Bowers W J, et al. In situ Raman
properties of amorphous and crystalline CrN/CrAlSiN multilayer spectroscopic investigation of chromium surfaces under
coating fabricated using HPPMS[J]. Surfaces and Interfaces, 2022, hydrothermal conditions[J]. Applied Surface Science, 2001, 180(1-
31: 102064. doi: 10.1016/j.surfin.2022.102064. 2): 102–118. doi: 10.1016/S0169-4332(01)00338-5.
[26] Kang Jian, Sui Xudong, Yang Shuyan, et al. Effect of bias voltages [35] Beth A L. Evaluation and optimisation of diamond-like carbon for
on the structure and properties of MoN coatings deposited by high tribological applications[D]. Leeds, Yorkshire and the Humber, UK:
power pulsed magnetron sputtering[J]. Tribology, 2023, 43(10): University of Leeds, 2014.
1118–1127 (in Chinese) [康建, 隋旭东, 杨淑燕, 等. 偏压对高功率 [36] Shaha K P, Pei Y T, Martinez-Martinez D, et al. Influence of surface
脉冲磁控溅射法沉积MoN涂层结构及性能的影响[J]. 摩擦学学 roughness on the transfer film formation and frictional behavior of
报, 2023, 43(10): 1118–1127]. doi: 10.16078/j.tribology.2022198. TiC/a-C nanocomposite coatings[J]. Tribology Letters, 2011, 41(1):
[27] SHANG Lunlin, HE Dongqing, LI Wensheng, et al. Preparation and 97–101. doi: 10.1007/s11249-010-9691-4.