Page 135 - 摩擦学学报2025年第10期

1532 摩擦学学报（中英文） 第 45 卷

abrasive wear of the samples mainly by plowing doi: 10.1016/j.surfcoat.2021.126915.
[36]
mechanism . The wear rate of all samples in B-Li [ 5 ] Yang Xiaoling, Luan Baifeng, Chen Lijun, et al. Improved oxidation
resistance of Cr/FeCrAl coating on Zr alloy in high-temperature
water was lower than that in air, this was due to the
steam environment[J]. Surface and Coatings Technology, 2023, 473:
formation of a liquid film between the friction pair and
129992. doi: 10.1016/j.surfcoat.2023.129992.
the sample surface in the B-Li water, which could
[ 6 ] Wang Jun, Li Haojie, Li Zhengyang, et al. Effect of temperature on
effectively reduced the wear rate of the sample. the fretting wear behavior of Cr-coated Zircaloy cladding in high-
temperature pressurized water[J]. Journal of Nuclear Materials,
4 Conclusions 2023, 584(12): 154516. doi: 10.1016/j.jnucmat.2023.154516.
[ 7 ] Zhang Lefu, Lai Ping, Liu Qingdong, et al. Fretting wear behavior of
FeCrAl/CrN coating was prepared using double-
zirconium alloy in B-Li water at 300 ℃[J]. Journal of Nuclear
target co-sputtering technology, the effect of the CrN
Materials, 2018, 499: 401–409. doi: 10.1016/j.jnucmat.2017.12.003.
interlayer on the microstructure, mechanical property,
[ 8 ] Reed B, Wang R, Lu R Y, et al. Autoclave grid-to-rod fretting wear
and wear behavior was investigated. The main evaluation of a candidate cladding coating for accident-tolerant
conclusions are as follows: fuel[J]. Wear, 2021, 466: 203578. doi: 10.1016/j.wear.2020.203578.
a. The CrN interlayer made the columnar crystal [ 9 ] Winter T C, Neu R W, Singh P M, et al. Fretting wear comparison of
structure of FeCrAl coating coarse and the preferred cladding materials for reactor fuel cladding application[J]. Journal of
Nuclear Materials, 2018, 508(1): 505–515. doi: 10.1016/j.jnucmat.
growth direction shifts from (110) to (211) .
2018.05.069.
b. The CrN interlayer increased the hardness of the
[10] He Xiujie, Yang Shengzhi, Huang Lanlan, et al. Friction and wear
FeCrAl coating but decreased the binding property
properties of CrSi-based coatings for nuclear fuel cladding[J].
between the FeCrAl coating and Zr-4. Surface and Coatings Technology, 2020, 402: 126311. doi: 10.1016/
c. In both air and B-Li water, FeCrAl coating j.surfcoat.2020.126311.
improved the wear resistance of Zr-4, and the CrN [11] Dabney T, Johnson G, Yeom H, et al. Experimental evaluation of
interlayer further improves the wear resistance of cold spray FeCrAl alloys coated zirconium-alloy for potential
accident tolerant fuel cladding[J]. Nuclear Materials and Energy,
FeCrAl/CrN coating. The main wear mechanisms of
2019, 21: 100715. doi: 10.1016/j.nme.2019.100715.
FeCrAl/CrN coating were oxidation wear, and abrasive
[12] Park J W, Kim J U, Park J Y. Ion beam mixed oxidation protective
wear in both air and B-Li water. B-Li water has a certain
coating on Zry-4 cladding[J]. Nuclear Instruments and Methods in
lubrication effect, which reduces the friction coefficient
Physics Research Section B: Beam Interactions with Materials and
and wear rate of FeCrAl/CrN coating. The wear rate of Atoms, 2016, 377: 12–16. doi: 10.1016/j.nimb.2016.04.001.
FeCrAl/CrN in B-Li water was the lowest, about [13] Lee Y H, Byun T S. A comparative study on the wear behaviors of
−7
3
6.0×10 mm /(N·m). cladding candidates for accident-tolerant fuel[J]. Journal of Nuclear
Materials, 2015, 465: 857–865. doi: 10.1016/j.jnucmat.2015.05.017.
References
[14] Liu Junkai, Hao Zhe, Cui Zhexin, et al. Oxidation behavior, thermal
[ 1 ] Yang Jianqiao, Steinbrück M, Tang Chongchong, et al. Review on stability, and the coating/substrate interface evolution of CrN-coated
chromium coated zirconium alloy accident tolerant fuel cladding[J]. Zircaloy under high-temperature steam[J]. Corrosion Science, 2021,
Journal of Alloys and Compounds, 2022, 895: 162450. doi: 10.1016/ 185: 109416. doi: 10.1016/j.corsci.2021.109416.
j.jallcom.2021.162450. [15] Terrani K A, Parish C M, Shin D, et al. Protection of zirconium by
[ 2 ] Allen T R, Konings R J M, Motta A T. Corrosion of zirconium alumina- and chromia-forming iron alloys under high-temperature
alloys[M]//Comprehensive Nuclear Materials. Amsterdam: Elsevier, steam exposure[J]. Journal of Nuclear Materials, 2013, 438(1-3):
2012: 49–68. doi:10.1016/b978-0-08-056033-5.00063-x. 64–71. doi: 10.1016/j.jnucmat.2013.03.006.
[ 3 ] Wang Yu, Tang Hui, Han Xiaochun, et al. Oxidation resistance [16] Ndumia J N, Zhu Jiping, Gbenontin B V, et al. Effect of heat
improvement of Zr-4 alloy in 1000 ℃ steam environment using treatment on the microstructure and corrosion behavior of arc-
ZrO 2 /FeCrAl bilayer coating[J]. Surface and Coatings Technology, sprayed FeCrAl/Al coating[J]. Journal of Materials Engineering and
2018, 349(Part 2): 807–815. doi:10.1016/j.surfcoat.2018.05.005. Performance, 2023, 32(4): 1489–1497. doi: 10.1007/s11665-022-
[ 4 ] Kim I H, Jung Y I, Kim H G, et al. Oxidation-resistant coating of 07241-1.
FeCrAl on Zr-alloy tubes using 3D printing direct energy [17] Chim Y C, Ding X Z, Zeng X T, et al. Oxidation resistance of TiN,
deposition[J]. Surface and Coatings Technology, 2021, 411: 126915. CrN, TiAlN and CrAlN coatings deposited by lateral rotating