Page 54 - 《摩擦学学报》2021年第3期

第 3 期 金延文, 等: SiC与球形石墨颗粒混杂增强铝基复合材料的摩擦磨损性能研究 343

(AA7150-hBN) using taguchi technique[J]. Composites Part B: 对SiC/Al-Zn-Mg-Cu复合材料微观结构与力学性能的影响[J]. 金
Engineering, 2019, 175: 107–136. 属学报, 2019, 55(10): 1319–1328]. doi: 10.11900/0412.1961.2018.
[23] Ritapure P P, Kharde Y R. SiC contents and pin temperature effect 00523.
on tribological properties of Al25Zn/SiC composites[J]. [28] Jinfeng L, Longtao J, Gaohui W, et al. Effect of graphite particle
International Journal of Refractory Metals and Hard Materials, 2019, reinforcement on dry sliding wear of SiC/Gr/Al composites[J]. Rare
82: 234–244. doi: 10.1016/j.ijrmhm.2019.04.013. Metal Materials and Engineering, 2009, 38(11): 1894–1898. doi:
[24] Zou Xiaochun, Zhang Jun, Sun Chuanxi, et al. Simulation 10.1016/S1875-5372(10)60059-8.
calculation and experimental research on contact between [29] Vencl A, Bobic I, Stojanovic B. Tribological properties of A356 Al-
locomotive wheel tread and rail[J]. Tribology, 2020, 40(1): 128–134 Si alloy composites under dry sliding conditions[J]. Industrial
(in Chinese) [邹小春, 张军, 孙传喜, 等. 机车车轮踏面与钢轨接触 Lubrication and Tribology, 2014, 66(1): 66–74. doi: 10.1108/ILT-
的仿真计算及试验研究[J]. 摩擦学学报, 2020, 40(1): 128–134]. 06-2011-0047.
[25] Du Mingchao, Li Zengliang, Dong Xiangwei, et al. Experimental [30] Guo M L T, Tsao C Y A. Tribological behavior of self-lubricating
and numerical study on erosion characteristics of rhomboid aluminium/SiC/graphite hybrid composites synthesized by the semi-
particles[J]. Tribology, 2018, 38(5): 501–511 (in Chinese) [杜明超, solid powder-densification method[J]. Composites Science and
李增亮, 董祥伟, 等. 菱形颗粒冲蚀磨损特性试验及仿真研究[J]. Technology, 2000, 60(1): 65–74. doi: 10.1016/S0266-3538(99)
摩擦学学报, 2018, 38(5): 501–511]. 00106-2.
[26] Radhika N, Subramaniam R. Wear behaviour of aluminium/ [31] Wang Y Q, Afsar A M, Jang J H, et al. Room temperature dry and
alumina/graphite hybrid metal matrix composites using taguchi's lubricant wear behaviors of Al 2 O 3f /SiCp/Al hybrid metal matrix
techniques[J]. Industrial Lubrication and Tribology, 2013, 65(3): composites[J]. Wear, 2010, 268(7-8): 863–870. doi: 10.1016/j.wear.
166–174. doi: 10.1108/00368791311311169. 2009.11.010.
[27] Ma Guonan, Wang dong, Liu Zhenyu, et al. Effect of hot pressing [32] Mahdavi S, Akhlaghi F. Effect of SiC content on the processing,
temperature on microstructure and tensile properties of SiC/Al-Zn- compaction behavior, and properties of Al6061/SiC/Gr hybrid
Mg-Cu composites[J]. Acta Metallurgica Sinica, 2019, 55(10): composites[J]. Journal of Materials Science, 2010, 46(5):
1319–1328 (in Chinese) [马国楠, 王东, 刘振宇, 等. 热压烧结温度 1502–1511.