Page 39 - 《摩擦学学报》2021年第1期

36 摩 擦 学 学 报 第 41 卷

behaviors of three optical glasses used in ICF[J]. Tribology, 2018, testing on coatings cross-section[J]. Tribology, 2014, 34(5):
38(3): 349–355 (in Chinese) [张亚锋, 何洪途, 余家欣, 等. 用于 570–577 (in Chinese) [于鹤龙, 张伟, 郭永明, 等. 等离子喷涂镍基
ICF的三种典型光学玻璃的AFM纳米划痕行为研究[J]. 摩擦学学 合金涂层内聚强度的截面划痕表征[J]. 摩擦学学报, 2014, 34(5):
报, 2018, 38(3): 349–355]. 570–577].
[ 3 ] Tseng A A. A comparison study of scratch and wear properties using [15] Yamaguchi T, Sugawara T, Takahashi M, et al. Dry sliding friction
atomic force microscopy[J]. Applied Surface Science, 2010, of ethylene vinyl acetate blocks: Effect of the porosity[J]. Tribology
256(13): 4246–4252. doi: 10.1016/j.apsusc.2010.02.010. International, 2017, 116: 264–271. doi: 10.1016/j.triboint.2017.
[ 4 ] Huang Ping, Xu Kewei, Han Yong. Preparation and scratch behavior 07.022.
of plasma oxidation film on titanium[J]. China Surface Engineering, [16] Maegawa S, Itoigawa F, Nakamura T. Effect of normal load on
2004, 17(3): 26–29 (in Chinese) [黄平, 徐可为, 憨勇. 钛表面等离 friction coefficient for sliding contact between rough rubber surface
子体氧化膜及其抗划擦性能[J]. 中国表面工程, 2004, 17(3): and rigid smooth plane[J]. Tribology International, 2015, 92:
26–29]. doi: 10.3321/j.issn:1007-9289.2004.03.006. 335–343. doi: 10.1016/j.triboint.2015.07.014.
[ 5 ] Akono A T, Randall N X, Ulm F J. Experimental determination of [17] Gao Chenghui, Liu Ming. Effects of normal load on the coefficient
the fracture toughness via microscratch tests: Application to of friction by microscratch test of copper with a spherical
polymers, ceramics, and metals[J]. Journal of Materials Research, indenter[J]. Tribology Letters, 2019, 67(1): 8. doi: 10.1007/s11249-
2012, 27(2): 485–493. doi: 10.1557/jmr.2011.402. 018-1124-9.
[ 6 ] Liu Ming, Li Shuo, Gao Chenghui. Fracture toughness measurement [18] Gao Chenghui, Henry Proudhon, Liu Ming. Three-dimensional finite
by micro-Scratch tests with conical indenter[J]. Tribology, 2019, element analysis of shallow indentation of rough strain-hardening
39(5): 556–564 (in Chinese) [刘明, 李烁, 高诚辉. 利用圆锥压头微 surface[J]. Friction, 2019, 7(6): 587–602. doi: 10.1007/s40544-018-
米划痕测试材料断裂韧性[J]. 摩擦学学报, 2019, 39(5): 556–564]. 0245-3.
[ 7 ] Liu Ming, Wu Jianan, Gao Chenghui. Sliding of a diamond sphere [19] Menezes P L, Kishore, Kailas S V. Studies on friction and transfer
on K9 glass under progressive load[J]. Journal of Non-Crystalline layer: role of surface texture[J]. Tribology Letters, 2006, 24(3):
Solids, 2019, 526: 119711. doi: 10.1016/j.jnoncrysol.2019.119711. 265–273. doi: 10.1007/s11249-006-9129-1.
[ 8 ] Dong Zhang, Yuan Sun, Chenghui Gao, et al. Measurement of [20] Wang Yaji, Mo Honglei, Sun Yuli, et al. Analysis of
fracture toughness of copper via constant-load microscratch with a monocrystalline silicon removal by micron scratch test[J]. Journal of
spherical indenter[J]. Wear, 2019, 444-445: 203158. the Chinese Ceramic Society, 2019, 47(10): 1509–1514 (in Chinese)
[ 9 ] Tabor D. The physical meaning of indentation and scratch [王亚霁, 墨洪磊, 孙玉利, 等. 基于微米划痕试验的单晶硅去除机
hardness[J]. British Journal of Applied Physics, 1956, 7(5): 制研究[J]. 硅酸盐学报, 2019, 47(10): 1509–1514].
159–166. doi: 10.1088/0508-3443/7/5/301. [21] Menezes P L, Kishore, Kailas S V, et al. Influence of tilt angle of
[10] Shi H, Atkinson M. A friction effect in low-load hardness testing of plate on friction and transfer layer —A study of aluminium pin
copper and aluminium[J]. Journal of Materials Science, 1990, 25(4): sliding against steel plate[J]. Tribology International, 2010, 43(5–6):
2111–2114. doi: 10.1007/BF01045774. 897–905.
[11] Williams J A. Analytical models of scratch hardness[J]. Tribology [22] Shi Chengi, Zhao Hongwei, Huang Hu, et al. Effects of probe tilt on
International, 1996, 29(8): 675–694. doi: 10.1016/0301-679X(96) nanoscratch results: An investigation by finite element analysis[J].
00014-X. Tribology International, 2013, 60(7): 64–69.
[12] Zhou Liang, Yao Yingxue. Research development of hardness [23] Zhong Yuexi. Analysis and experimental study on influencing
indentation size effect at micro/nanoscale[J]. Journal of Harbin factors of scratch behavior[D]. Changchun: Jilin university, 2018(in
Institute of Technology, 2008, (4): 597–602 (in Chinese) [周亮, 姚 Chinese) [钟月曦. 划痕测试影响因素分析与试验研究[D]. 长春:
英学. 微纳米尺度压痕硬度尺寸效应的研究进展[J]. 哈尔滨工业 吉林大学, 2018].
大学学报, 2008, (4): 597–602]. doi: 10.3321/j.issn:0367-6234.2008.04. [24] A T AlMotasem, Bergström A, Gåård P, et al. Atomistic insights on
020. the wear/friction behavior of nanocrystalline ferrite during
[13] Yang Honggang, Li Shu, Duan Deli. Scratching test and its finite nanoscratching as revealed by molecular dynamics[J]. Tribology
element simulation for estimating adhesion between TiN film and Letters, 2017, 65(3): 101. doi: 10.1007/s11249-017-0876-y.
substrate[J]. Tribology, 2009, 29(6): 592–599 (in Chinese) [杨洪刚, [25] Sinha S K, Lim D B J. Effects of normal load on single-pass
李曙, 段德莉. 评估TiN薄膜与基材结合的划痕试验及有限元模拟 scratching of polymer surfaces[J]. Wear, 2006, 260(7): 751–765.
[J]. 摩擦学学报, 2009, 29(6): 592–599]. doi: 10.3321/j.issn:1004- [26] Xu Z H, Li X. Effect of sample tilt on nanoindentation behaviour of
0595.2009.06.017. materials[J]. Philosophical Magazine, 2007, 87(16): 2299–2312. doi:
[14] Yu Helong, Zhang Wei, Guo Yongming, et al. Bond Behaviors 10.1080/14786430601175516.
characterization of the plasma sprayed NiCrBSi coatings by scratch [27] Kashani M S, Madhavan V. Analysis and correction of the effect of