Page 40 - 《摩擦学学报》2021年第1期

第 1 期 刘明, 等: 试样倾斜和正压力对球形压头微米划痕测试紫铜的影响 37

sample tilt on results of nanoindentation[J]. Acta Materialia, 2011, [36] Gao C H, Liu M. Effect of Sample Tilt on Measurement of Friction
59(3): 883–895. doi: 10.1016/j.actamat.2010.09.051. Coefficient by Constant-Load Scratch Testing of Copper with a
[28] Zhu Guangyu, Dong Xiangyu, Gao Chenghui, et al. Effects of Spherical Indenter[J]. Journal of Testing and Evaluation, 2020,
sample tilt on berkovich nanoindentation test of fused silica[J]. Acta 48(2): 20180719. doi: 10.1520/JTE20180719.
Metrologica Sinica, 2019, 40(2): 289–294 (in Chinese) [朱光宇, 董 [37] Byerlee J D. The mechanics of stick-slip[J]. Tectonophysics, 1970,
翔宇, 高诚辉, 等. 试样倾斜对熔融石英硅三棱锥纳米压痕测试的 9(5): 475–486. doi: 10.1016/0040-1951(70)90059-4.
影响[J]. 计量学报, 2019, 40(2): 289–294]. [38] Zhang Junjie, Wei Yujie, Sun Tao, et al. Twin boundary spacing-
[29] Gao Chenghui, Yao Ligang, Zheng Rongye, et al. Effect of Sample dependent friction in nanotwinned copper[J]. Physical Review B,
Tilt on Spherical Indentation of an Elastic Solid[J]. Journal of
2012, 85(5): 054109. doi: 10.1103/PhysRevB.85.054109.
Testing and Evaluation, 2019, 47(4): 20170579. doi: 10.1520/JTE
[39] Dai Shijuan. Effects of high energy shot peening on the
20170579.
microstructure, mechanical properties and wear resistant properties
[30] Gao Chenghui, Liu Ming. Characterization of spherical indenter
of pure titanium[J]. Journal of Chongqing University of
with fused silica under small deformation by Hertzian relation and
Technology(Natural Science), 2018, 32(10): 116–120, 155
Oliver and Pharr's method[J]. Vacuum, 2018, 153: 82–90. doi:
(in Chinese) [戴世娟. 高能喷丸处理对纯钛的显微组织、力学和耐
10.1016/j.vacuum.2018.03.061.
磨性能的影响[J]. 重庆理工大学学报(自然科学), 2018, 32(10):
[31] Huang Liye, Xu Kewei, Lu Jian. Evaluation of scratch resistance of
116–120, 155].
diamond-like carbon films on Ti alloy substrate by nano-scratch
[40] Liu Ming, Huang Chengxin, Gao Chenghui. Effect of Sample Tilt on
technique[J]. Diamond and Related Materials, 2002, 11(8):
Measurement of Friction Coefficient by Microscratch Test of
1505–1510. doi: 10.1016/S0925-9635(02)00054-7.
Copper with a Spherical Indenter[J]. Acta Metrologica Sinica, 2020,
[32] Flores S E, Pontin M G, Zok F W. Scratching of elastic∕plastic
41(10): 1252–1259 (in Chinese) [刘明, 黄承馨, 高诚辉. 试样倾斜
materials with hard spherical indenters[J]. Journal of Applied
对球形压头微米划痕测试紫铜摩擦系数的影响[J]. 计量学报,
Mechanics, 2008, 75(6): 061021. doi: 10.1115/1.2966268.
2020, 41(10): 1252–1259]. doi: 10.3969/j.issn.1000-1158.2020.
[33] Liu Ming, Yang Shenghan, Gao Chenghui. The surface shape vision
10.12.
measurement for scratch based on level set[J]. Chinese Journal of
[41] Chen Deqiang, Zhang Yongzhen, Shangguan Bao, et al. Effect of
Scientific Instrument, 2020, 41(2): 184–194 (in Chinese) [刘明, 杨
胜寒, 高诚辉. 基于水平集方法的划痕形状表面视觉测量[J]. 仪器 floor morphology on human stepping friction under heeling
condition[J]. Tribology, 2020, 40(2): 143–149 (in Chinese) [陈德强,
仪表学报, 2020, 41(2): 184–194].
张永振, 上官宝, 等. 横倾状态下地板表面形貌对人体步进摩擦的
[34] Jiang H, Browning R, Fincher J, et al. Influence of surface
roughness and contact load on friction coefficient and scratch 影响[J]. 摩擦学学报, 2020, 40(2): 143–149].
behavior of thermoplastic olefins[J]. Applied Surface Science, 2008, [42] Bowden F P, Tabor D. The friction and lubrication of solids[J].
254(15): 4494–4499. doi: 10.1016/j.apsusc.2008.01.067. American Journal of Physics, 1951, 19(7): 428. doi: 10.1119/1.
[35] Chen Rongyu, Huang Ping. Experiment study on adhesion between 1933017.
rough surf[J]. Tribology, 2016, 36(3): 269–275 (in Chinese) [陈荣 [43] Xiao Jinkun, Zhang Lei, Zhou Kechao, et al. Microscratch behavior
誉, 黄平. 粗糙表面的黏着试验研究[J]. 摩擦学学报, 2016, 36(3): of copper–graphite composites[J]. Tribology International, 2013, 57:
269–275]. 38–45. doi: 10.1016/j.triboint.2012.07.004.