Page 124 - 《摩擦学学报》2020年第6期

第 6 期 袁伟, 等: 高频循环载荷下球面滑动副摩擦学特征研究 807

tribological property of heavy vechicle engine piston ring-cylinder line monitoring and wear mechanism analysis under dynamic
liner[J]. Material Engineering, 2014(6): 56–61 (in Chinese) [李奇, loading manners[J]. Journal of Huazhong University of Science and
王宪成, 蔡志海, 等. 载荷对重型车辆发动机活塞环-缸套摩擦学 Sciences (Natural Science Edition), 2016, 44(2): 36–39, 80
性能的影响[J]. 材料工程, 2014(6): 56–61]. doi: 10.11868/j.issn.1001- (in Chinese) [袁伟, 董光能, Chin K S, 等. 变载荷下摩擦磨损在线
4381.2014.06.011. 监测与磨损机理分析[J]. 华中科技大学学报(自然科学版), 2016,
[ 3 ] Ma Longhua, Liu Haichao, Guo Feng, et al. Experimental study on 44(2): 36–39, 80].
adsorption film thickness of protein aqueous lubricants under impact [11] Wu J, Mi X, Wu T, et al. A wavelet-analysis-based differential
load[J]. Tribology, 2017, 37(6): 65–72 (in Chinese) [马龙华, 刘海 method for engine wear monitoring via on-line visual ferrograph[J].
超, 郭峰, 等. 冲击载荷下蛋白质水溶液吸附成膜的润滑试验研究 P I Mech Eng J-J Eng, 2013, 227: 1356–1366.
[J]. 摩擦学学报, 2017, 37(6): 65–72]. [12] Qiao Z, Lei Y, Lin J, et al. An adaptive unsaturated bistable
[ 4 ] Belkacem L, Abdelbaki N, Otegui J L, et al. Using a supperficially stochastic resonance method and its application in mechanical fault
treated 2024 aluminum alloy drill pipe to delay failure during diagnosis[J]. Mechanical Systems and Signal Processing, 2017, 84:
dynamic loading[J]. Engineering Failure Analysis, 2019, 104: 731–746. doi: 10.1016/j.ymssp.2016.08.030.
261–273. doi: 10.1016/j.engfailanal.2019.06.005. [13] Inturi V, Sabareesh G R, Supradeepan K, et al. Integrated condition
[ 5 ] Guo Fang, Fang Zongde, Zhang Xijin. Calculation on the meshing- monitoring scheme for bearing fault diagnosis of a wind turbine
in impact of modified gear considering the measured pitch error[J]. gearbox[J]. Journal of Vibration and Control, 2019, 25(12):
Journal of Vibration and Shock, 2018, 37(22): 30–35, 42 1852–1865. doi: 10.1177/1077546319841495.
(in Chinese) [郭芳, 方宗德, 张西金. 考虑实测基节误差的修形齿 [14] Chen B, Zhang Z, Sun C, et al. Fault feature extraction of gearbox
轮啮入冲击计算[J]. 振动与冲击, 2018, 37(22): 30–35, 42]. by using overcomplete rational dilation discrete wavelet transform
[ 6 ] Al-Hamadani H, An T, King M, et al. System dynamic modelling of on signals measured from vibration sensors[J]. Mechanical Systems
three different wind turbine gearbox designs under transient loading and Signal Processing, 2012, 33: 275–298. doi: 10.1016/j.ymssp.
conditions[J]. International Journal of Precision Engineering and 2012.07.007.
Manufacturing, 2017, 18(11): 1659–1668. doi: 10.1007/s12541-017- [15] Xu H, Komvopoulos K. Fracture and fatigue of the surface layer of
0194-1. layered media due to adhesive sliding contact[J]. Engineering
[ 7 ] Nejad A R, Bachynski E E, Kvittem M I, et al. Stochastic dynamic Fracture Mechanics, 2020, 223: 106697. doi: 10.1016/j.engfracmech.
load effect and fatigue damage analysis of drivetrains in land-based 2019.106697.
and TLP, spar and semi-submersible floating wind turbines[J]. [16] Yue Xuehu, Fan Yujin, Li Pengyuan. Influence of sliding friction
Marine Structures, 2015, 42: 137–153. doi: 10.1016/j.marstruc.2015. contact on the quality of busbar bending forming[J]. Surface
03.006. Technology, 2019, 48(1): 320–325 (in Chinese) [岳学虎, 樊瑜瑾,
[ 8 ] Dong W, Xing Y, Moan T, et al. Time domain-based gear contact 李鹏元. 滑动摩擦接触对母线弯曲成形质量的影响[J]. 表面技术,
fatigue analysis of a wind turbine drivetrain under dynamic 2019, 48(1): 320–325].
conditions[J]. International Journal of Fatigue, 2013, 48: 133–146. [17] Yuan Wei, Dong Guangneng, Guo Qianjian, et al. Tribological
doi: 10.1016/j.ijfatigue.2012.10.011. performance of differential gear end-face sliding on washer with a
[ 9 ] Gwenaëlle Le Corre. An approach for comparing in-service multi- radial groove[J]. Engineering Failure Analysis, 2018, 85: 126–136.
input loads applied on non-stiff components submitted to vibration doi: 10.1016/j.engfailanal.2017.11.015.
fatigue[J]. Procedia Engineering, 2018, 213: 48–57. doi: 10.1016/ [18] Fan Bin, Feng Song, Che Yitong, et al. An oil monitoring method of
j.proeng.2018.02.006. wear evaluation for engine hot tests[J]. The International Journal of
[10] Yuan Wei, Dong Guangneng, Chin K S, et al. Friction and wear on- Advanced Manufacturing Technology, 2018, 94(9): 3199–3207.