Page 90 - 《爆炸与冲击》2026年第8期

第 46 卷 丁肇银，等： 非金属内肋增强粉末式破门弹的侵彻效应与附带损伤特性 第 8 期

[21] DARWISH Y, ELGAWADY M A. Numerical and experimental investigation of negative stiffness beams and honeycomb
structures [J]. Engineering Structures, 2024, 301: 117163. DOI: 10.1016/j.engstruct.2023.117163.
[22] WANG Z, LI Z H, ZHANG X. Bending resistance of thin-walled multi-cell square tubes [J]. Thin-Walled Structures, 2016,
107: 287–299. DOI: 10.1016/j.tws.2016.06.017.
[23] LI Z X, MA W, HOU L, et al. Crashworthiness analysis of corrugations reinforced multi-cell square tubes [J]. Thin-Walled
Structures, 2020, 150: 106708. DOI: 10.1016/j.tws.2020.106708.
[24] WANG Z G, LIU J F, YAO S. On folding mechanics of multi-cell thin-walled square tubes [J]. Composites Part B:
Engineering, 2018, 132: 17–27. DOI: 10.1016/j.compositesb.2017.07.036.
[25] GANJIANI M. A damage model for predicting ductile fracture with considering the dependency on stress triaxiality and Lode
angle [J]. European Journal of Mechanics-A/Solids, 2020, 84: 104048. DOI: 10.1016/j.euromechsol.2020.104048.
[26] TIWARI G, KHAIRE N. Ballistic performance and energy dissipation characteristics of cylindrical honeycomb sandwich
structure [J]. International Journal of Impact Engineering, 2022, 160: 104065. DOI: 10.1016/j.ijimpeng.2021.104065.
[27] 徐祥, 王彬, 田明亮, 等. 一种耐低温 PA6 材料及其制备方法: CN116135928A [P]. 2023-05-19.
XU X, WANG B, TIAN M L, et al. Low-temperature-resistant PA6 material and preparation method thereof: CN116135928A
[P]. 2023-05-19.
[28] SALMORIA G V, LEITE J L, VIEIRA L F, et al. Mechanical properties of PA6/PA12 blend specimens prepared by selective
laser sintering [J]. Polymer Testing, 2012, 31(3): 411–416. DOI: 10.1016/j.polymertesting.2011.12.006.
[29] TAHER F, HARDANI H, BAKHSHI S, et al. Enhancing the tensile properties of PA6/CNT nanocomposite in selective laser
sintering process [J]. Polymer Composites, 2023, 44(2): 1290–1304. DOI: 10.1002/pc.27171.
[30] WEI L K, ABD RAHIM S Z, AL BAKRI ABDULLAH M M, et al. Producing metal powder from machining chips using ball
milling process: a review [J]. Materials, 2023, 16(13): 4635. DOI: 10.3390/ma16134635.
[31] RUSINEK A, RODRÍGUEZ-MARTÍNEZ J A, ZAERA R, et al. Experimental and numerical study on the perforation process
of mild steel sheets subjected to perpendicular impact by hemispherical projectiles [J]. International Journal of Impact
Engineering, 2009, 36(4): 565–587. DOI: 10.1016/j.ijimpeng.2008.09.004.
[32] RUSSELL B P. Multi-hit ballistic damage characterisation of 304 stainless steel plates with finite elements [J]. Materials &
Design, 2014, 58: 252–264. DOI: 10.1016/j.matdes.2014.01.074.
[33] TENG X, WIERZBICKI T. Transition of failure modes in round-nosed mass-to-beam impact [J]. European Journal of
Mechanics-A/Solids, 2005, 24(5): 857–876. DOI: 10.1016/j.euromechsol.2005.04.001.
[34] BAGHERZADEH-KHALKHALI A, MIRGHASEMI A A, MOHAMMADI S. Micromechanics of breakage in sharp-edge
particles using combined DEM and FEM [J]. Particuology, 2008, 6(5): 347–361. DOI: 10.1016/j.partic.2008.07.002.
[35] 张博宇, 刘怀举, 魏沛堂, 等. 基于 DEM-FEM 的微粒喷丸仿真分析 [J]. 中国表面工程, 2022, 35(4): 204–212. DOI:
10.11933/j.issn.1007-9289.20211126001.
ZHANG B Y, LIU H J, WEI P T, et al. Simulation analysis of micro-shot peening based on DEM-FEM method [J]. China
Surface Engineering, 2022, 35(4): 204–212. DOI: 10.11933/j.issn.1007-9289.20211126001.
[36] WANG J, LIU M Z, LEI M Z, et al. Gas and powder flow characteristics of packed bed: a two-way coupled CFD-DEM
study [J]. International Journal of Multiphase Flow, 2024, 178: 104904. DOI: 10.1016/j.ijmultiphaseflow.2024.104904.
[37] AKCAKAYA R, VARNER J R. Computer model for Hertzian impact [J]. Journal of Materials Science Letters, 1991, 10(21):
1271–1274. DOI: 10.1007/BF00720943.
(责任编辑 王影)

083301-17