Page 178 - 《摩擦学学报》2021年第6期
P. 178

第 6 期             孙建芳, 等: 钛合金表面DLC薄膜的制备及其与不同材料配副的摩擦学性能研究                                     963

            [13]  Wu Xingyang, Chen Teng, Ge Zhou, et al. Tribological properties of  tribological characteristics of hydrogenated DLC film sliding against
                 N  and  Si  Co-doped  DLC  films  under  different  humidity  ceramic  mating  materials  for  helium  applications[J].  Applied
                 conditions[J]. Tribology, 2017, 37(4): 501–509 (in Chinese) [吴行  Surface  Science,  2018,  441:  884–894.  doi:  10.1016/j.apsusc.2018.
                 阳, 陈腾, 葛宙, 等. 不同湿度条件下N、Si共掺杂DLC膜的摩擦学              01.206.
                 性能研究[J]. 摩擦学学报, 2017, 37(4): 501–509]. doi: 10.16078/j.  [21]  Schwan  J,  Ulrich  S,  Batori  V,  et  al.  Raman  spectroscopy  on
                 tribology.2017.04.012.                            amorphous carbon films[J]. Journal of Applied Physics, 1996, 80(1):
            [14]  Wang  Xiongwei,  Chai  Liqiang,  Pang  Xianjuan,  et  al.  Influence  of  440–447. doi: 10.1063/1.362745.
                 salt spray test to DLC film on tribological properties[J]. Tribology,  [22]  Zhang S, Zeng X T, Xie H, et al. A phenomenological approach for
                 2018, 38(4): 453–461 (in Chinese) [王雄伟, 柴利强, 逄显娟, 等. 盐
                                                                   the Id/Ig ratio and sp3 fraction of magnetron sputtered a-C films[J].
                 雾腐蚀对DLC薄膜摩擦学性能的影响[J]. 摩擦学学报, 2018,
                                                                   Surface and Coatings Technology, 2000, 123(2–3): 256–260. doi:
                 38(4): 453–461]. doi: 10.16078/j.tribology.2018.04.010.
                                                                   10.1016/S0257-8972(99)00523-X.
            [15]  Waesche  R,  Hartelt  M,  Weihnacht  V.  Influence  of  counterbody
                                                               [23]  Zhao Jiaqun, Li Liuhe, Jing Kai, et al. Effects of gradient interlayers
                 material  on  wear  of  ta-C  coatings  under  fretting  conditions  at
                                                                   on wear resistance of diamond-like coatings on cemented carbide[J].
                 elevated temperatures[J]. Wear, 2009, 267(12): 2208–2215. doi: 10.
                                                                   Surface Technology, 2017, 46(1): 82–87 (in Chinese) [赵佳群, 李刘
                 1016/j.wear.2009.08.041.
                                                                   合, 景凯, 等. 梯度过渡层对硬质合金沉积类金刚石膜的耐磨性影
            [16]  Wang  Fu,  Lu  Zhibin,  Zhang  Guangan,  et  al.  Mating  material-
                                                                   响 [J].  表 面 技 术 ,  2017,  46(1):  82–87].  doi:  10.16490/j.cnki.issn.
                 dependence  of  tribological  behavior  of  fluorinated  amorphous
                                                                   1001-3660.2017.01.014.
                 carbon-based films[J]. Tribology, 2017, 37(3): 357–363 (in Chinese)
                                                               [24]  Wang Junjun, He Haoran, Huang Weijiu, et al. Effects of Cr-based
                 [王福, 鲁志斌, 张广安, 等. 氟化非晶碳基薄膜摩擦学行为对配副
                                                                   interlayers on tribological property of diamond-like carbon films on
                 材料的依赖性[J]. 摩擦学学报, 2017, 37(3): 357–363]. doi: 10.
                                                                   titanium  alloy[J].  China  Surface  Engineering,  2018,  31(3):  61–67
                 16078/j.tribology.2017.03.011.
                                                                   (in Chinese) [王军军, 何浩然, 黄伟九, 等. Cr基过渡层对钛合金表
            [17]  Li H, Xu T, Wang C, et al. Tribochemical effects on the friction and
                                                                   面类金刚石薄膜摩擦学性能的影响[J]. 中国表面工程, 2018,
                 wear  behaviors  of  diamond-like  carbon  film  under  high  relative
                                                                   31(3): 61–67]. doi: 10.11933/j.issn.1007-9289.20180108003.
                 humidity condition[J]. Tribology Letters, 2005, 19(3): 231–238. doi:
                                                               [25]  Lu Zhibin, wang Liping, Zhang Guangan, et al. The dependence of
                 10.1007/s11249-005-6150-8.
                                                                   energy dissipation on the elastic energy density of friction pairs in
            [18]  Zheng  Shaoxian,  Li  Qiang,  Huo  Lei.  Tribological  mechanism
                                                                   hard coating films[J]. Tribology Letters, 2011, 41(2): 435–438. doi:
                 analysis  of  DLC  film  and  its  different  matings  in  CO 2
                                                                   10.1007/s11249-010-9725-y.
                 environment[J].  Journal  of  Lanzhou  University  of  Technology,
                 2019, 45(5): 6–11 (in Chinese) [郑韶先, 李强, 霍磊. CO 2 环境下  [26]  Bai  Lichun,  Zhang  Guangan,  Lu  Zhibin,  et  al.  Tribological
                 DLC与不同对偶的摩擦学机理分析[J]. 兰州理工大学学报, 2019,              mechanism of hydrogenated amorphous carbon film against pairs: a
                 45(5): 6–11]. doi: 10.3969/j.issn.1673-5196.2019.05.002.  physical  description[J].  Journal  of  Applied  Physics,  2011,  110(3):
            [19]  Cui  L,  Lu  Z,  Wang  L.  Toward  low  friction  in  high  vacuum  for  033521. doi: 10.1063/1.3619798.
                 hydrogenated  diamondlike  carbon  by  tailoring  sliding  interface[J].  [27]  Shi Jing, Gong Zhenbin, Wang Yongfu, et al. Friction and wear of
                 ACS Applied Materials & Interfaces, 2013, 5(13): 5889–5893. doi:  hydrogenated  and  hydrogen-free  diamond-like  carbon  films:
                 10.1021/am401192u.                                Relative humidity dependent character[J]. Applied Surface Science,
            [20]  Wu  Daheng,  Ren  Siming,  Pu  Jibin,  et  al.  A  comparative  study  of  2017, 422: 147–154. doi: 10.1016/j.apsusc.2017.05.210.
   173   174   175   176   177   178   179   180   181   182   183