Page 141 - 《摩擦学学报》2021年第5期

730 摩 擦 学 学 报 第 41 卷

致呈先降低后升高趋势，随着微织构的深度增加呈先 texturing (LST) on tribological behavior of double glow plasma
降低后升高趋势. 在微织构深度H =0.03、微织构尺寸 surface zirconizing coating on Ti 6 Al 4 V alloy[J]. Surface and
p
Coatings Technology, 2019, 368: 97–109. doi: 10.1016/j.surfcoat.
2
R =4或5时，滑动轴承的磨损情况最小.
2019.04.038.
c. 采用万能摩擦磨损试验研究了微织构半径对
[ 9 ] Urbaniak W, Kaldonski T, Hagner-Derengowska M, et al.
试件摩擦系数及磨损形貌的影响规律，得出了“微织 Impregnated porous bearings textured with a pocket on sliding
构半径为0.14和0.17 mm时，平均摩擦系数最低，摩擦 surfaces: comparison of h-boron nitride with graphite and
系数曲线较优，表面形貌磨损较小”的结论. 摩擦试验 molybdenum disulphide up to 150 ℃[J]. Meccanica, 2015, 50(5):
后试件表面产生了黏着磨损及磨粒磨损，试件表面存 1343–1349. doi: 10.1007/s11012-014-0095-7.
[10] Li Yinan, Zhang Yong, Feng Tianming, et al. Simulation study on
在磨粒剥落的现象，但在半径为0.17 mm时，磨粒磨损
hydrodynamic lubrication performance of convex texture surface
痕迹和黏着磨损痕迹均明显浅于其他试件表面.
based on discharge deposition[J]. Surface Technology, 2019, 48(8):
d. 理论和试验均证明，随着微织构尺寸的增加， 59–67 (in Chinese) [李一楠, 张勇, 冯天明, 等. 放电沉积凸貌微织
摩擦系数和磨损量呈先降低后增加的趋势；最优的微 构表面动压润滑性能仿真研究[J]. 表面技术, 2019, 48(8): 59–67].
织构尺寸可以有效提高滑动轴承的润滑性能、降低摩 doi: 10.16490/j.cnki.issn.1001-3660.2019.08.009.
[11] Zhang Zhao, Lu Wenzhuang, He Yafeng, et al. Research on optimal
擦系数并且减小磨损.
laser texture parameters about antifriction characteristics of
参 考 文 献
cemented carbide surface[J]. International Journal of Refractory
Metals and Hard Materials, 2019, 82: 287–296. doi: 10.1016/j.ijrmhm.
[ 1 ] Shinde A B, Pawar P M. Multi-objective optimization of surface
2019.05.008.
textured journal bearing by Taguchi based Grey relational
analysis[J]. Tribology International, 2017, 114: 349–357. doi: 10. [12] Kümmel D, Hamann-Schroer M, Hetzner H, et al. Tribological
1016/j.triboint.2017.04.041. behavior of nanosecond-laser surface textured Ti 6 Al 4 V[J]. Wear,
[ 2 ] Yu Haiwu, Wang Xiaolei, Zhou Fei. Geometric shape effects of 2019, 422-423: 261–268. doi: 10.1016/j.wear.2019.01.079.
[13] Lu Chongyang, Yang Xuefeng, Wang Shouren, et al. Dynamic
surface texture on the generation of hydrodynamic pressure between
conformal contacting surfaces[J]. Tribology Letters, 2010, 37(2): pressure lubrication and anti-friction characteristics of the working
123–130. doi: 10.1007/s11249-009-9497-4. surface of the cemented carbide with triangular grooved
[ 3 ] Zhang Yu, Chen Guoding, Wang Lin. Thermoelastohydrodynamic microtexture[J]. Tribology, 2018, 38(5): 537–546 (in Chinese) [鹿重
阳, 杨学锋, 王守仁, 等. 三角沟槽形织构化硬质合金工作表面动
analysis of misaligned bearings with texture on journal surface under
high-speed and heavy-load conditions[J]. Chinese Journal of 压润滑及减摩特性[J]. 摩擦学学报, 2018, 38(5): 537–546]. doi:
Aeronautics, 2019, 32(5): 1331–1342. doi: 10.1016/j.cja.2018. 10.16078/j.tribology.2018.05.006.
08.005. [14] Li Jianliang, Xiong Dangsheng, Dai Jihui, et al. Effect of surface
[ 4 ] Dong Jian, Wang Xiaojing, Zhang Jin, et al. An experimental laser texture on friction properties of nickel-based composite[J].
research on the vibration of surface-textured journal bearings[J]. Tribology International, 2010, 43(5-6): 1193–1199. doi: 10.1016/
Shock and Vibration, 2017, 2017: 1–9. doi: 10.1155/2017/1261826. j.triboint.2009.12.044.
[ 5 ] Rao T V V L N, Rani A M A, Nagarajan T, et al. Analysis of couple [15] Zhu Dong, Martini A, Wang Wenzhong, et al. Simulation of sliding
stress fluid lubricated partially textured slip slider and journal wear in mixed lubrication[J]. Journal of Tribology, 2007, 129(3):
bearing using narrow groove theory[J]. Tribology International, 544–552. doi: 10.1115/1.2736439.
2014, 69: 1–9. doi: 10.1016/j.triboint.2013.08.006. [16] Okamoto Y, Kitahara K, Ushijima K, et al. A study for wear and
[ 6 ] Su Fenghua, Mao Chuan, Li Zhujun. Experiment and simulation fatigue on engine bearings by using EHL analysis[J]. JSAE Review,
study on the effect of texture depth on tribological properties of 2000, 21(2): 189–196. doi: 10.1016/S0389-4304(99)00092-2.
stainless steel surface under oil lubricating condition[J]. Tribology, [17] Ding Xingwu, Wang Jiaxu, Guo Yin, et al. Optimization analysis of
2019, 39(2): 181–187 (in Chinese) [苏峰华, 毛川, 李助军. 织构深 the surface texture of friction pair based on sliding friction[J].
度对不锈钢表面油润滑条件下摩擦学性能影响的试验和仿真研 Journal of Sichuan University (Engineering Science Edition), 2013,
究[J]. 摩擦学学报, 2019, 39(2): 181–187]. doi: 10.16078/j.tribology. 45(S1): 183–188 (in Chinese) [丁行武, 王家序, 郭胤, 等. 基于滑动
2018143. 摩擦的摩擦副表面织构优化分析[J]. 四川大学学报(工程科学版),
[ 7 ] Wang Lili, Guo Shaohui, Wei Yuliang, et al. Optimization research 2013, 45(S1): 183–188]. doi: 10.15961/j.jsuese.2013.s1.030.
on the lubrication characteristics for friction pairs surface of journal [18] Reis J O D, Rodrigues G W, Bittencourt M L. Virtual texturing of
bearings with micro texture[J]. Meccanica, 2019, 54(8): 1135–1148. lightweight engine crankshaft bearings[J]. Journal of the Brazilian
doi: 10.1007/s11012-019-01015-1. Society of Mechanical Sciences and Engineering, 2019, 41(6): 1–15.
[ 8 ] Yuan Shuo, Lin Naiming, Zou Jiaojuan, et al. Effect of laser surface doi: 10.1007/s40430-019-1740-9.