Page 122 - 《摩擦学学报》2021年第2期

第 2 期 王岩, 等: 钢帘线拉拔液润滑特性研究 267

tungsten carbide dies in wet drawing process of steel cord [14] Chen Yusheng, Schlarb J L. Steel cord –rubber adhesion with
filament[J]. International Journal of Refractory Metals and Hard SEM/EDX[J]. Tire Science and Technology, 2018, 46(1): 27–37.
Materials, 2008, 26(6): 589–600. doi: 10.1016/j.ijrmhm.2008.01. doi: 10.2346/tire.18.460102.
009. [15] Tetsuya Nakajima, Akifumi Matsuoka, Kenichi Yamashita, et al.
[ 7 ] Kakubo T, Shimizu K, Kumagai A, et al. Degradation of a metal- Humidity-aging resistant steel cord[J]. SEI Technical Review, 2019,
polymer interface observed by element-specific focused ion beam- 88: 136–140.
scanning electron microscopy[J]. Langmuir, 2020, 36(11): [16] Liu Xianghui. Analysis of the bonding mechanism between steel
2816–2822. doi: 10.1021/acs.langmuir.0c00034. cord and rubber by scanning electron microscope/energy
[ 8 ] Katiyar P K, Singh P K, Singh R, et al. Modes of failure of cemented spectrometer[J]. China Rubber/Plastics Technology and Equipment,
tungsten carbide tool bits (WC/Co): a study of wear parts[J]. 2018, 44(21): 17–19 (in Chinese) [刘湘慧. 扫描电子显微镜/能谱
International Journal of Refractory Metals and Hard Materials, 2016, 仪分析钢帘线与橡胶之间的黏合机理[J]. 橡塑技术与装备, 2018,
54: 27–38. doi: 10.1016/j.ijrmhm.2015.06.018. 44(21): 17–19]. doi: 10.13520/j.cnki.rpte.2018.21.003.
[ 9 ] Takada M, Matsubara H, Kawagishi Y. Wear of cemented carbide [17] Chandra A K, Biswas A, Mukhopadhyay R, et al. SEM/EDX studies
dies for steel cord wire drawing[J]. Materials Transactions, 2013, of the influence of a cobalt adhesion promoter on the interface
54(10): 2011–2017. doi: 10.2320/matertrans.m2013185. between rubber skim compounds and tire steel cord[J]. Journal of
[10] Abou-Kandil A I, Awad A, Darwish N, et al. Adhesion of brass Adhesion Science and Technology, 1996, 10(5): 431–460. doi:
plated steel cords to natural rubber: Dynamic and statistical study of 10.1163/156856196X00526.
adhesion failure[J]. International Journal of Adhesion and [18] Coppens W, Chambaere D, Lievens H. Brass-coated steel elements
Adhesives, 2013, 44: 26–35. doi: 10.1016/j.ijadhadh.2013.01.018. having improved rubber adhesion properties: US4883722[P]. 1989-
[11] Boure´ P, Mazuyer D, Georges J M, et al. Formation of boundary 11-28
lubricating layers with water-based lubricant in a concentrated [19] Fulton W S. Steel tire cord-rubber adhesion, including the
elastohydrodynamic contact[J]. Journal of Tribology, 2002, 124(1): contribution of cobalt[J]. Rubber Chemistry and Technology, 2005,
91–102. doi: 10.1115/1.1398549. 78(3): 426–457. doi: 10.5254/1.3547891.
[12] Popa C M, Gebhardt C, Raje N, et al. Investigation of cord-rubber [20] Haemers G, Mollet J. The role of the brass surface composition with
composite durability by the material force method[J]. Engineering regard to steel cord rubber adhesion[J]. Journal of Elastomers &
Fracture Mechanics, 2020, 229: 106909. doi: 10.1016/j.engfracmech. Plastics, 1978, 10(3): 241–261. doi: 10.1177/009524437801000304.
2020.106909. [21] Jeon G S. On characterizing microscopically the adhesion interphase
[13] Cornette P, Zanna S, Seyeux A, et al. The native oxide film on a for the adhesion between metal and rubber compound Part II. Effect
model aluminium-copper alloy studied by XPS and ToF-SIMS[J]. of copper content for brass-plated steel cord[J]. Journal of Adhesion
Corrosion Science, 2020, 174: 108837. doi: 10.1016/j.corsci.2020. Science and Technology, 2014, 28(18): 1808–1822. doi:
108837. 10.1080/01694243.2014.922455.