Page 120 - 《摩擦学学报》2020年第4期

530 摩 擦 学 学 报 第 40 卷

[15] Jin Xincan, Zhang Xiaobin, Zhou Kang. Study on load spectrum Materials for Mechanical Engineering, 2019, 43(8): 41–45, 74
compilation and fatigue strength of high-speed train wheel axle[J]. (in Chinese) [冉旭, 姜明坤, 韩英. 高铁用进口EA4T钢车轴的组织
Journal of Beijing Jiaotong University, 2018, 42(4): 113–120 和 力 学 性 能 [J]. 机 械 工 程 材 料 , 2019, 43(8): 41–45, 74]. doi:
(in Chinese) [金新灿, 张晓斌, 周康. 高速列车轮轴载荷谱编制及 10.11973/jxgccl201908008.
疲劳强度分析[J]. 北京交通大学学报, 2018, 42(4): 113–120]. doi: [22] Ding J, McColl I R, Leen S B, et al. A finite element based approach
10.11860/j.issn.1673-0291.2018.04.016.
to simulating the effects of debris on fretting wear[J]. Wear, 2007,
[16] Foletti S, Beretta S, Gurer G. Defect acceptability under full-scale
263: 481–491. doi: 10.1016/j.wear.2006.12.056.
fretting fatigue tests for railway axles[J]. International Journal of
[23] Yue T, Abdel W M. A numerical study on the effect of debris layer
Fatigue, 2016, 86: 34–43. doi: 10.1016/j.ijfatigue.2015.08.023.
on fretting wear[J]. Materials, 2016, 9: 597. doi: 10.3390/ma9070
[17] Rieger M, Moser C, Brunnhofer P, et al. Fatigue crack growth in
597.
full-scale railway axles – Influence of secondary stresses and load
[24] Zeng D F, Zhang Y B, Lu L T, et al. Fretting wear and fatigue in
sequence effects[J]. International Journal of Fatigue, 2019, 10:
press-fitted railway axle: A simulation study of the influence of
53–60.
stress relief groove[J]. International Journal of Fatigue, 2019, 118:
[18] Mädler K, Geburtig T, Ullrich D. An experimental approach to
225–236. doi: 10.1016/j.ijfatigue.2018.09.008.
determining the residual lifetimes of wheelset axles on a full-scale
[25] Bertini L, Santus C. Fretting fatigue tests on shrink-fit specimens
wheel-rail roller test rig[J]. International Journal of Fatigue, 2016,
and investigations into the strength enhancement induced by deep
86: 58–63. doi: 10.1016/j.ijfatigue.2015.06.016.
rolling[J]. International Journal of Fatigue, 2015, 81: 179–190. doi:
[19] BS EN 13103-1: 2017. British Standards Institution. Railway
10.1016/j.ijfatigue.2015.08.007.
applications-wheelsets and bogies[S]. London: BSI Standards
[26] Kubota M, Niho S, Sakae C, et al. Effect of understress on fretting
Publication, 2017.
fatigue crack initiation of press-fitted axle[J]. JSME International
[20] Cong Tao, Han Jianmin, Chen Gang, et al. Study on performance of
Journal Series A-solid Mechanics and Material Engineering, 2003,
new material wheel for high speed electric multiple unit[J]. China
Railway Science, 2018, 39: 75–81 (in Chinese) [丛韬, 韩建民, 陈 46: 297–302. doi: 10.1299/jsmea.46.297.
刚, 等. 高速动车组新材质车轮性能研究[J]. 中国铁道科学, 2018, [27] Sosa G U, Hills D A, Sackfield A. A shrink-fit peg subject to
39: 75–81]. doi: 10.3969/j.issn.1001-4632.2018.01.10. bending and shearing forces[J]. The Journal of Strain Analysis for
[21] Ran Xu, Jiang Mingkun, Han Ying. Microstructure and mechanical Engineering Design, 1999, 34: 23–29. doi: 10.1243/0309324991
properties of imported ea4t steel axle for high-speed railway[J]. 513597.