Page 93 - 《爆炸与冲击》2026年第10期

第 46 卷 汪 泉，等： 真空爆炸焊接TC4/09MnNiDR钢复合板及其低温性能研究 第 10 期

welding [J]. Explosion and Shock Waves, 2021, 41(7): 0753001. DOI: 10.11883/bzycj-2020-0197.
[15] 周德政, 李晓杰, 王小红, 等. 覆土真空爆炸容器内部载荷及动态响应分析 [J]. 爆炸与冲击, 2024, 44(10): 101407. DOI:
10.11883/bzycj-2023-0455.
ZHOU D Z, LI X J, WANG X H, et al. Analysis of internal load and dynamic response of vacuum explosion containment
vessel with sand covered for explosive welding [J]. Explosion and Shock Waves, 2024, 44(10): 101407. DOI: 10.11883/bzycj-
2023-0455.
[16] DING Y X, WEN D S, WANG X W, et al. Interface evolution and mechanical properties of Al/Ta laminated composites
fabricated by vacuum-embedded diffusion welding [J]. International Journal of Refractory Metals and Hard Materials, 2025,
133: 107302. DOI: 10.1016/j.ijrmhm.2025.107302.
[17] LI X J, ZHANG T Z, DAI X D, et al. Hazardous effects and microstructure of explosive welding under vacuum environment [J].
The International Journal of Advanced Manufacturing Technology, 2024, 130(7/8): 3741–3754. DOI: 10.1007/s00170-023-
12892-y.
[18] 汪泉, 胡程, 谢守冬, 等. 负压条件对 T2/Q235 爆炸焊接复合板界面的影响 [J]. 火炸药学报, 2024, 47(1): 64–71. DOI:
10.14077/j.issn.1007-7812.202306020.
WANG Q, HU C, XIE S D, et al. Influence of negative pressure on interface of T2/Q235 explosive welded composite plate [J].
Chinese Journal of Explosives & Propellants, 2024, 47(1): 64–71. DOI: 10.14077/j.issn.1007-7812.202306020.
[19] 李雪交, 孙标, 张文喆, 等. Mg/Al 真空爆炸焊接微观形貌及力学性能 [J]. 高压物理学报, 2024, 38(6): 064105. DOI:
10.11858/gywlxb.20240793.
LI X J, SUN B, ZHANG W Z, et al. Micro-morphology and mechanical properties of Mg/Al composites under vacuum
explosion welding [J]. Chinese Journal of High Pressure Physics, 2024, 38(6): 064105. DOI: 10.11858/gywlxb.20240793.
[20] ZHU G C, GUO H J, ZENG X Y, et al. Study on the microstructure and mechanical properties of aluminum-steel composite
joints explosively welded in vacuum or in air [J]. Materials Today Communications, 2025, 48: 113417. DOI: 10.1016/j.
mtcomm.2025.113417.
[21] YANG M, MA H H, SHEN Z W. Study on self-restrained explosive welding with high energy efficiency [J]. International
Journal of Advanced Manufacturing Technology, 2018, 99(9): 3123–3132. DOI: 10.1007/s00170-018-2600-y.
[22] ZHOU Q, LIU R, ZHOU Q, et al. Effect of microstructure on mechanical properties of titanium-steel explosive welding
interface [J]. Materials Science and Engineering: A, 2022, 830: 142260. DOI: 10.1016/j.msea.2021.142260.
[23] 梁汉良, 罗宁, 陈彦龙, 等. TA2/AZ31B/2024Al 爆炸焊接复合板界面微观结构特征及其动态力学性能 [J]. 爆炸与冲击,
2024, 44(4): 045301. DOI: 10.11883/bzycj-2023-0367.
LIANG H L, LUO N, CHEN Y L, et al. Interfacial microstructure characteristics and dynamic mechanical properties of
TA2/AZ31B/2024Al explosively-welded composite plates [J]. Explosion and Shock Waves, 2024, 44(4): 045301. DOI:
10.11883/bzycj-2023-0367.
[24] CHU Q L, ZHANG M, LI J H, et al. Experimental and numerical investigation of microstructure and mechanical behavior of
titanium/steel interfaces fabricated by explosive welding [J]. Materials Science and Engineering: A, 2017, 689: 323–331. DOI:
10.1016/j.msea.2017.02.075.
[25] CHU Q L, ZHANG M, LI J H, et al. Influence of vanadium filler on the properties of titanium and steel TIG welded joints [J].
Journal of Materials Processing Technology, 2017, 240: 293–304. DOI: 10.1016/j.jmatprotec.2016.06.018.
[26] LEI X L, DING W H, LU X X, et al. Interfacial modification of titanium/steel composites and its effect on the growth pattern
of Fe-Ti compounds [J]. Materials Today Communications, 2024, 39: 109289. DOI: 10.1016/j.mtcomm.2024.109289.
(责任编辑 张凌云)

103101-17