Page 47 - 《摩擦学学报》2021年第6期

832 摩 擦 学 学 报 第 41 卷

18(5): 33–35]. doi: 10.3321/j.issn:1005-023X.2004.05.010. Press, 2018 (in Chinese) [中国国家标准化管理委员会. GB/T
[21] Liu Yongping, Yang Bin. Study on microstructure and properties of 35083.1-2018 滑动轴承 轴承材料摩擦学特性试验 第1部分: 金属
Cu-9Ni-6Sn elastic Copper alloy[J]. Journal of Jiangxi University of 轴承-材料试验[S]. 北京: 中国标准出版社, 2018].
Science and Technology, 2009, 30(3): 74–78 (in Chinese) [刘永平, [27] Li Heyan, Ma Chengnan, Wu Jianpeng, et al. Friction performance
杨斌. Cu-9Ni-6Sn弹性铜合金的组织及性能研究[J]. 江西理工大 of Cu-based powder metallurgy dry friction pairs in running-in
学学报, 2009, 30(3): 74–78]. process[J]. Tribology, 2018, 38(2): 153–160 (in Chinese) [李和言,
[22] Zhang Liheng. Influence of Fe addition on structure and properties 马成男, 吴健鹏, 等. 铜基粉末冶金干式摩擦副磨合过程摩擦性能
of Cu-9Ni-6Sn alloy[J]. Shanghai Nonferrous Metals, 2000, 21(3): 研 究 [J]. 摩 擦 学 学 报 , 2018, 38(2): 153–160]. doi: 10.16078/j.
112–121 (in Chinese) [张利衡. 添加Fe对Cu-9Ni-6Sn合金组织与性 tribology.2018.02.005.
能的影响[J]. 上海有色金属, 2000, 21(3): 112–121]. doi: 10.13258/ [28] Zhou Fei, Chen Kangmin, Wang Meiling, et al. Friction and wear
j.cnki.snm.2000.03.003. properties of CrN coatings sliding against Si 3 N 4 balls in water and
[23] Xu Siyang, Li Yinglong, Cai Zhihui, et al. The current situation and air[J]. Wear, 2008, 265(7–8): 1029–1037. doi: 10.1016/j.wear.2008.
prospect for high-strength and high-elasticity copper alloy[J]. 02.010.
Journal of Materials and Metallurgy, 2018, 17(4): 300–305,316 [29] Xue Bokai, Mi Xue, Bai Chongcheng, et al. Effect of current
(in Chinese) [许斯洋, 李英龙, 蔡志辉, 等. 高强高弹铜合金研究及 strength on bending fatigue damage characteristics of copper-
发展趋势[J]. 材料与冶金学报, 2018, 17(4): 300–305,316]. doi: 10. magnesium alloy[J]. Tribology, 2020, 40(1): 107–116 (in Chinese)
14186/j.cnki.1671-6620.2018.04.009. [薛博凯, 米雪, 白崇成, 等. 电流作用对铜镁合金弯曲微动疲劳损
[24] Standardization Administration of China. GB/T 24182-2009 伤特性的影响[J]. 摩擦学学报, 2020, 40(1): 107–116]. doi: 10.
Symbols and definitions in publication standards for testing 16078/j.tribology.2019122.
mechanical properties of metals[S]. Beijing: China Standard Press, [30] Yin Xiangchun. Study on dry sliding friction and wear properties of
2009 (in Chinese) [中国国家标准化管理委员会. GB/T 24182- ZM6 and ZK60 magnesium alloys[D]. Yanji: Yanbian University,
2009金属力学性能试验 出版标准中的符号及定义[S]. 北京: 中国 2019 (in Chinese) [尹相春. ZM6和ZK60镁合金干式滑动摩擦磨损
标准出版社, 2009]. 性能研究[D]. 延吉: 延边大学, 2019].
[25] Standardization Administration of China. GB/T 231.1-2018 Metallic [31] Wen Shizhu, Huang Ping. Tribological principle[M]. Beijing:
materials-Brinell hardness test-Part 1: Test methods[S]. Beijing: Tsinghua University Press, 2012 (in Chinses) [温诗铸, 黄平. 摩擦
China Standard Press, 2018 (in Chinese) [中国国家标准化管理委 学原理[M]. 北京: 清华大学出版社, 2012].
员会. GB/T 231.1-2018 金属材料 布氏硬度试验 第1部分: 试验方 [32] Li Xinxing. Research on wear behavior and mechanism of titanium
法[S]. 北京: 中国标准出版社, 2018]. alloys under various sliding velocities and environmental media[D].
[26] Standardization Administration of China. GB/T 35083.1-2018 Plain Zhenjiang: Jiangsu University, 2016 (in Chinese) [李新星. 钛合金
bearings- Tribological characteristics test of bearing materials-Part 在不同滑动速度和介质下磨损行为和机制的研究[D]. 镇江: 江苏
1: Test of metallic bearing materials[S]. Beijing: China Standard 大学, 2016].