Page 107 - 摩擦学学报2025年第8期

第 8 期 王伊枨, 等: 3种粘结固体润滑涂层的摩擦学及气蚀性能研究 1205

[16] Lince J R. Effective application of solid lubricants in spacecraft oil[J]. Cell Reports Physical Science, 2023, 4(12): 101731. doi: 10.
mechanisms[J]. Lubricants, 2020, 8(7): 74. doi: 10.3390/lubricants 1016/j.xcrp.2023.101731.
8070074. [27] Kumar N, Kozakov A T, Ravindran T R, et al. Load dependent
[17] Yang Kaiming, Yan Hongxia, Zhang Yuanbo, et al. Properties of friction coefficient of crystalline graphite and anomalous behavior of
boron nitride/hyperbranched polysiloxane-polyimide bonded solid wear dimension[J]. Tribology International, 2015, 88: 280–289. doi:
lubricant coating[J]. Tribology, 2022, 42(5): 1053–1062 (in Chinese) 10.1016/j.triboint.2015.03.034.
[杨开明, 颜红侠, 张渊博, 等. 氮化硼/超支化聚硅氧烷-聚酰亚胺 [28] Guo Ruichao, Yan Zhengze. Investigation of double adsorption
粘结固体润滑涂层的性能[J]. 摩擦学学报, 2022, 42(5): 1053– properties of graphite[J]. Journal of East China University of
1062]. doi: 10.16078/j.tribology.2021176. Science and Technology, 1990, 16(6): 639–645 (in Chinese) [郭瑞
[18] Yu Chuanyong, Chen Lei, Li Hongxuan, et al. Study on properties 超, 严正泽. 石墨双向吸附特性的研究[J]. 华东化工学院学报,
of octa-amino polyhedral oligomeric silsesquioxane modified 1990, 16(6): 639–645]. doi: 10.14135/j.cnki.1006-3080.1990.06.007.
polyamide-imide based lubrication coatings[J]. Paint & Coatings [29] Zhang Zixuan, Hou Guoliang, Wan Hongqi, et al. Effect of epoxy
Industry, 2019, 49(5): 8–15 (in Chinese) [俞传永, 陈磊, 李红轩, 等.
resin modification on the cavitation erosion resistance of polyamide-
八氨基倍半硅氧烷改性聚酰胺酰亚胺基润滑涂层的性能研究[J].
imide coatings [J]. China Surface Engineering, 2024, 37(05): 88-101
涂料工业, 2019, 49(5): 8–15]. doi: 10.12020/j.issn.0253-4312.2019. (in Chinese) [张梓轩, 侯国梁, 万宏启等. 环氧树脂改性对聚酰胺
5.8.
酰亚胺涂层抗空蚀性能的影响[J]. 中国表面工程, 2024, 37(05):
[19] Ma Yanjun. Design, Preparation and properties of in-situ reinforced
88-101]. doi: 10. 11933 / j. issn. 1007-9289. 20231113001.
bonded solid lubricating coatings[D]. Beijing: University of Chinese
[30] Yang Ruijie, Ye Yinping, Wan Hongqi, et al. Tribological properties
Academy of Sciences, 2020 (in Chinese) [马彦军. 基于原位增强粘
of polyimide bonded MoS 2 solid lubricant coatings in different
结固体润滑涂层的设计、制备及性能研究[D]. 北京: 中国科学院
oils[J]. Tribology, 2011, 31(3): 278–282 (in Chinese) [杨瑞杰, 冶银
大学, 2020.].
平, 万宏启, 等. 聚酰亚胺粘结MoS 2 基固体润滑涂层在油介质中
[20] General Administration of Quality Supervision, Inspection and
的摩擦学性能[J]. 摩擦学学报, 2011, 31(3): 278–282]. doi: 10.
Quarantine of the People’s Republic of China, Standardization
16078/j.tribology.2011.03.007.
Administration of the People’s Republic of China. The method of
[31] Wu Yuli, Hou Guoliang, Cui Haixia, et al. A functional coating with
vibration cavitation erosion test: GB/T 6383 —2009[S]. Beijing:
mechanoluminescent properties for sensing cavitation erosion and
Standards Press of China, 2009 (in Chinese) [国家质量监督检验检
early warning of protection failure[J]. Composites Part B: Engineer-
疫总局, 中国国家标准化管理委员会. 振动空蚀试验方法: GB/T
ing, 2023, 266: 111021. doi: 10.1016/j.compositesb.2023.111021.
6383—2009[S]. 北京: 中国标准出版社, 2009.].
[32] Liu Qi, Li Zhen, Du Sanming, et al. Cavitation erosion behavior of
[21] Measurement method for contact angle of nano-film surface. GB/T
GH 4738 nickel-based superalloy[J]. Tribology International, 2021,
30447 —2013[S]. Beijing: Standards Press of China, 2013 (in
156: 106833. doi: 10.1016/j.triboint.2020.106833.
Chinese) [纳米薄膜接触角测量方法. GB/T 30447—2013[S]. 北
[33] Wei Zheng, Wu Yuping, Hong Sheng, et al. Ultrasonic cavitation
京: 中国标准出版社, 2013].
erosion behaviors of high-velocity oxygen-fuel (HVOF) sprayed
[22] Wang Yijing. Friction/cavitation erosion properties of
AlCoCrFeNi high-entropy alloy coating in different solutions[J].
NiCrWMoCuCBFe coating in corrosive environment[D]. Beijing:
University of Chinese Academy of Sciences, 2022 (in Chinese) [王 Surface and Coatings Technology, 2021, 409: 126899. doi: 10.1016/
j.surfcoat.2021.126899.
怡静. 腐蚀环境中 NiCrWMoCuCBFe 涂层的摩擦/气蚀性能研
[34] Niebuhr D. Cavitation erosion behavior of ceramics in aqueous
究[D]. 北京: 中国科学院大学, 2022].
solutions[J]. Wear, 2007, 263(1-6): 295–300. doi: 10.1016/j.wear.
[23] Liu Xiaoxu, Yamaguchi R, Umehara N, et al. Effect of oil
2006.12.040.
temperature and counterpart material on the wear mechanism of ta-
CNx coating under base oil lubrication[J]. Wear, 2017, 390(18): [35] Li Ning, Yang Rui, Tian Ye, et al. Synthesis of durable hydrophobic
312–321. doi: 10.1016/j.wear.2017.08.012. fluorinated polyurethanes with exceptional cavitation erosion
[24] Song Haojie, Zhang Zhaozhu, Men Xuehu. Effect of nano-Al 2 O 3 resistance[J]. Tribology International, 2023, 177(2): 107973. doi: 10.
surface treatment on the tribological performance of phenolic 1016/j.triboint.2022.107973.
composite coating[J]. Surface and Coatings Technology, 2006, [36] Yu Xi, Deng Wenli, Chen Xinchun. Macroscopic superlubricity
201(6): 3767–3774. doi: 10.1016/j.surfcoat.2006.09.084. enabled by the tribopair of nc-Ag/MoS 2 and hydrogenated graphitic-
[25] Zhuo Xin, Cao Jun, Huang Haibo, et al. Cavitation erosion like carbon films under high contact stress[J]. Applied Surface
resistance and tribological performance of PAI/PI/EP soft coating on Science, 2023, 611(3): 155814. doi: 10.1016/j.apsusc.2022.155814.
20CrMo[J]. Wear, 2024, 536(13): 205176. doi: 10.1016/j.wear.2023. [37] Nyberg H, Sundberg J, Särhammar E, et al. Extreme friction
205176. reductions during initial running-in of W–S–C–Ti low-friction
[26] Li Jianfeng, Cheng Yao, Song Wei, et al. Molecular origin of coatings[J]. Wear, 2013, 302(1–2): 987–997. doi: 10.1016/j.wear.
nanofriction contrast between graphite and MoS 2 homojunctions in 2013.01.065.