Page 12 - 摩擦学学报2025年第5期
P. 12

646                                    摩擦学学报(中英文)                                        第 45 卷

                 Gas Turbines and Power, 2011, 133(3): 1. doi: 10.1115/1.4002317.  2013, 33(1): 49–56 (in Chinese) [田野, 孙岩桦, 杨利花, 等. 箔片-
            [14]   Zywica  G,  Baginski  P,  Banaszek  S.  Experimental  studies  on  foil  电磁混合轴承的稳态承载特性及控制[J]. 摩擦学学报, 2013,
                 bearing with a sliding coating made of synthetic material[J]. Journal  33(1): 49–56]. doi: 10.16078/j.tribology.2013.01.012.
                 of Tribology, 2016, 138(1): 011301. doi: 10.1115/1.4031396.  [22]   Wang Fayi. Design, fabrication and static or dynamic performance
            [15]   Zywica G, Baginski P, Bogulicz M, et al. Numerical identification of  of  experi-mental  study  on  gas  foil  bearing[D].  Changsha:  Hunan
                 the  dynamic  characteristics  of  a  nonlinear  foil  bearing  structure:  University, 2014 (in Chinese) [王法义. 空气箔片轴承设计、制造及
                 effect of the excitation force amplitude and the assembly preload[J].  其静态和动态特性试验研究[D]. 长沙: 湖南大学, 2014].
                 Journal of Sound Vibration, 2022, 520: 116663. doi: 10.1016/j.jsv.  [23]   Feng Kai, Huang Ming, Li Chengqin, et al. Test of high speed and
                 2021.116663.                                      heavy  load  gas  foil  bearing  and  set  up  of  test  rig[J].  Journal  of
            [16]   Gong  Huansun,  Cheng  Shihu,  Zhang  Hongxing,  et  al.  Elastic  Hunan University (Natural Sciences), 2020, 47(2): 1–5 (in Chinese)
                 cylindric shell hydrodynamic gas bearing supported by wave-formed  [冯凯, 黄明, 李成勤, 等. 径向气体箔片轴承高速重载测试及试验
                 foil  (bump  foil)  (Ⅱ) —the  frictional  power  loss  test  and  its  台搭建[J]. 湖南大学学报(自然科学版), 2020, 47(2): 1–5]. doi: 10.
                 parametric  investigation[J].  Journal  of  University  of  Shanghai  for  16339/j.cnki.hdxbzkb.2020.02.001.
                 Science and Technology, 1982, 4(1): 29–44 (in Chinese) [龚焕孙,  [24]   Xu Ben, Zhang Jingyang, Chen Weidong, et al. Static characteristics
                 程诗虎, 张鸿兴, 等. 支承在波形箔带上的弹性圆壳动压气体轴承                  of  multi-leaf  bump  foil  aerodynamic  bearing  based  on  contact
                 (Ⅱ): 摩擦功耗试验及其参数分析[J]. 上海机械学院学报, 1982,             friction[J].  Journal  of  Propulsion  Technology,  2022,  43(11):
                 4(1): 29–44]. doi: 10.13255/j.cnki.jusst.1982.01.003.  322–331 (in Chinese) [徐奔, 张镜洋, 陈卫东, 等. 基于接触摩擦的
            [17]   Chen Weiwu, Feng Yizhi. Development and testing of a new type of  多叶波箔型动压气体轴承静特性研究[J]. 推进技术, 2022, 43(11):
                 thrust  wave  foil  bearing[J].  Machine  Design  and  Research,  1986,  322–331]. doi: 10.13675/j.cnki.tjjs.210634.
                 (4): 6–16 (in Chinese) [陈伟武, 冯懿治. 新型推力波箔轴承的研制  [25]   Wang Ping, Long Wei, Xin Xiaocheng, et al. Experimental study on
                 和试验[J]. 机械设计与研究, 1986, (4): 6–16]. doi: 10.13952/j.cnki.  plane  cross  joint  of  air  static  thrust  bearing  with  small  orifice
                 jofmdr.1986.04.002.                               throttling[J]. Tribology, 2023, 43(11): 1310–1318 (in Chinese) [王
            [18]   Hou Yu, Wang Bingchen, Xiong Lianyou, et al. Experimental study  萍, 龙威, 辛晓承, 等. 小孔节流空气静压止推轴承平面跨缝试验
                 of  plate-foil  journal  gas  bearings[J].  Journal  of  Xi’an  Jiaotong  研究[J]. 摩擦学学报, 2023, 43(11): 1310–1318]. doi: 10.16078/j.
                 University, 1999, 33(3): 60–63 (in Chinese) [侯予, 王秉琛, 熊联友,  tribology.2023223.
                 等. 平箔式箔片径向气体轴承的试验研究[J]. 西安交通大学学报,             [26]   Andrés L S, Kim T H. Forced nonlinear response of gas foil bearing
                 1999, 33(3): 60–63]. doi: 10.3321/j.issn:0253-987X.1999.03.015.  supported rotors[J]. Tribology International, 2008, 41(8): 704–715.
            [19]   Zhao  Qi,  Qiang  Mingchen,  Hou  Yu,  et  al.  3D  thermal-elasto-  doi: 10.1016/j.triboint.2007.12.009.
                 hydrodynamic  numerical  analysis  of  multi-leaf  gas  foil  thrust  [27]   Le Lez S, Arghir M, Frene J. Static and dynamic characterisation of
                 bearing[J]. Tribology, 2023, 43(11): 1361–1369 (in Chinese) [赵琪,  a  bump-type  foil  bearing  structure[C]//STLE/ASME  Joint  Inter-
                 强铭琛, 侯予, 等. 悬臂止推箔片轴承三维流-固-热耦合数值分                  national  Tribology  Conference,  San  Antonio,  2006.  doi:10.1115/
                 析 [J].  摩 擦 学 学 报 ,  2023,  43(11):  1361–1369].  doi:  10.16078/j.  IJTC2006-12047.
                 tribology.2023222.                            [28]   Breedlove  A  W.  Experimental  identification  of  structural  force
            [20]   Yang  Lihua,  Shi  Jianhua,  Liu  Heng,  et  al.  Experimental  study  on  coefficients in a bump-type foil bearing[D]. College Station: Texas
                 dynamic  performance  of  compliant  aerodynamic  foil  journal  air  A & M University, 2010.
                 bearings[J]. Tribology, 2006, 26(4): 353–357 (in Chinese) [杨利花,  [29]   Ginsberg  J  H.  Mechanical  and  structural  vibrations:  theory  and
                 石建华, 刘恒, 等. 弹性箔片动压径向气体轴承动特性的试验研                   applications[M]. New York: Wiley, 2001.
                 究[J]. 摩擦学学报, 2006, 26(4): 353–357]. doi: 10.3321/j.issn:1004-  [30]   Feng Kai, Guo Zhiyang. Prediction of dynamic characteristics of a
                 0595.2006.04.013.                                 bump-type  foil  bearing  structure  with  consideration  of  dynamic
            [21]   Tian  Ye,  Sun  Yanhua,  Yang  Lihua,  et  al.  Steady  state  bearing  friction[J].  Tribology  Transactions,  2014,  57(2):  230–241.  doi:  10.
                 behavior and control of hybrid foil-magnetic bearings[J]. Tribology,  1080/10402004.2013.864790.
   7   8   9   10   11   12   13   14   15   16   17