Page 30 - 《摩擦学学报》2021年第4期

第 4 期 刘明, 等: 恒定大载荷划痕试验下紫铜的三维形貌及划痕硬度分析 473

报, 2018, 38(3): 349–355]. doi: 10.16078/j.tribology.2018.03.013. of pure titanium[J]. Journal of Chongqing University of Technology
[16] Jiang H, Browning R, Fincher J, et al. Influence of surface (Natural Science), 2018, 32(10): 116–120, 155 (in Chinese) [戴世
roughness and contact load on friction coefficient and scratch 娟. 高能喷丸处理对纯钛的显微组织、力学和耐磨性能的影响[J].
behavior of thermoplastic olefins[J]. Applied Surface Science, 2008, 重庆理工大学学报(自然科学), 2018, 32(10): 116–120, 155]. doi:
254(15): 4494–4499. doi: 10.1016/j.apsusc.2008.01.067. 10.3969/j.issn.1674-8425(z).2018.10.018.
[17] Feng Biao. Effects of surface roughness on scratch resistance and [28] Kurkcu P, Andena L, Pavan A. An experimental investigation of the
stress-strain fields during scratch tests[J]. AIP Advances, 2017, 7(3): scratch behaviour of polymers-2: Influence of hard or soft fillers[J].
035217. doi: 10.1063/1.4979332. Wear, 2014, 317(1-2): 277–290. doi: 10.1016/j.wear.2014.03.011.
[18] Nečas D, Klapetek P. Gwyddion: an open-source software for SPM [29] Bellemare S, Dao M, Suresh S. The frictional sliding response of
data analysis[J]. Central European Journal of Physics, 2012, 10(1): elasto-plastic materials in contact with a conical indenter[J].
181–188. doi: 10.2478/s11534-011-0096-2. International Journal of Solids and Structures, 2007, 44(6):
[19] Xu Yang, Li Dun, Shen Jiabin, et al. Research progress in scratch 1970–1989. doi: 10.1016/j.ijsolstr.2006.08.008.
behaviors of polymeric materials[J]. Acta Polymerica Sinica, [30] Kita Y, Ido M, Tuji Y. The influence of the cutting speed on the
2018(10): 1262–1278 (in Chinese) [徐杨, 李顿, 沈佳斌, 等. 高分子 mechanism of metal removal by an abrasive tool[J]. Wear, 1981,
材料刮擦行为研究进展[J]. 高分子学报, 2018(10): 1262–1278]. 71(1): 55–63. doi: 10.1016/0043-1648(81)90139-3.
doi: 10.11777/j.issn1000-3304.2018.18089. [31] Kareer A, Hou X D, Jennett N M, et al. The existence of a lateral
[20] Nautiyal P, Jain J, Agarwal A. Influence of microstructure on size effect and the relationship between indentation and scratch
scratch-induced deformation mechanisms in AZ80 magnesium hardness in copper[J]. Philosophical Magazine, 2016, 96(32-34):
alloy[J]. Tribology Letters, 2016, 61(3): 1–7. doi: 10.1007/s11249- 3396–3413. doi: 10.1080/14786435.2016.1146828.
016-0649-z.. [32] Lindroos M, Valtonen K, Kemppainen A, et al. Wear behavior and
[21] Zhong Yuexi. Analysis and experimental study on influencing work hardening of high strength steels in high stress abrasion[J].
factors of scratch behavior[D]. Changchun: Jilin University, 2018 (in Wear, 2015, 322-323: 32–40. doi: 10.1016/j.wear.2014.10.018.
Chinese) [钟月曦. 划痕测试影响因素分析与试验研究[D]. 长春: [33] Dalmau A, Rmili W, Joly D, et al. Tribological behavior of new
吉林大学, 2018]. martensitic stainless steels using scratch and dry wear test[J].
[22] Sakamoto T, Tsukizoe T. Friction and prow formation in a scratch Tribology Letters, 2014, 56(3): 517–529. doi: 10.1007/s11249-014-
process of copper by a diamond cone[J]. Wear, 1977, 44(2): 0429-6.
393–403. doi: 10.1016/0043-1648(77)90153-3. [34] Standard test method for scratch hardness of materials using a
[23] Geng Y, Zhang J, Yan Y, et al. Experimental and theoretical diamond stylus[J]. ASTM Stand, 2009, 3: 1–7.
investigation of crystallographic orientation dependence of [35] Brookes C A, Green P, Harrison P H, et al. Some observations on
nanoscratching of single crystalline copper[J]. PLoS One, 2015, scratch and indentation hardness measurements[J]. Journal of
10(7): e0131886. doi: 10.1371/journal.pone.0131886. Physics D: Applied Physics, 1972, 5(7): 1284–1293. doi: 10.1088/
[24] Yu Qiancheng, He Yongyong. Acoustic emission characteristics of 0022-3727/5/7/313.
scratch process on copper surface[J]. Journal of Vibration and [36] Al-Athel K S, Ibrahim M, Arif A F M, et al. Effect of composition
Shock, 2014, 33(2): 89–92 (in Chinese) [余前程, 何永勇. 铜表面划 and thickness on the hardness and scratch resistance of copper and
痕过程声发射特性[J]. 振动与冲击, 2014, 33(2): 89–92]. doi: copper alloy coatings[J]. Arabian Journal for Science and
10.13465/j.cnki.jvs.2014.02.017. Engineering, 2017, 42(11): 4895–4904. doi: 10.1007/s13369-017-
[25] Gahr K H Z. Preface. Tribology Series, Microstructure and Wear of 2661-5.
Materials[M]. Amsterdam: Elsevier, 1987: v-vi. doi: 10.1016/s0167- [37] Lee K M, Yeo C-D, Polycarpou A A. Relationship between scratch
8922(08)70718-1. hardness and yield strength of elastic perfectly plastic materials
[26] Franco L A, Sinatora A. Material removal factor (f ab ): a critical using finite element analysis[J]. Journal of Materials Research,
assessment of its role in theoretical and practical approaches to 2008, 23(8): 2229–2237. doi: 10.1557/JMR.2008.0279.
abrasive wear of ductile materials[J]. Wear, 2017, 382-383: 51–61. [38] Zhu Rongtao, Li Yanfeng, Zhang Xinxi, et al. Strain-rate sensitivity
doi: 10.1016/j.wear.2017.04.006. of scratch hardness and deformation mechanism in nanocrystalline
[27] Dai Shijuan. Effects of high energy shot peening on the Ni under micro-scratch testing[J]. Journal of Materials Science,
microstructure, mechanical properties and wear resistant properties 2016, 51(12): 5889–5900. doi: 10.1007/s10853-016-9890-y.