Page 35 - 《摩擦学学报》2021年第3期

324 摩 擦 学 学 报 第 41 卷

2016, 63: 02025. doi: 10.1051/matecconf/20166302025.
[ 7 ] Archard J F. Contact and rubbing of flat surfaces[J]. Journal of
Applied Physics, 1953, 24(8): 981–988. doi: 10.1063/1.1721448.
[ 8 ] Lee R S, Jou J L. Application of numerical simulation for wear
analysis of warm forging Die[J]. Journal of Materials Processing
Technology, 2003, 140(1-3): 43–48. doi: 10.1016/S0924-0136(03)
00723-4.
1:4
[ 9 ] Zhao Bo, Dai Xudong, Zhang Zhinan, et al. Effects of mechanical
flexibility on joint wear in multibody systems with different
flexibilities[J]. Tribology, 2014, 34(6): 705–714 (in Chinese) [赵波,
戴旭东, 张执南, 等. 柔性对多体系统中铰接副磨损的影响[J]. 摩
擦学学报, 2014, 34(6): 705–714]. doi: 10.16078/j.tribology.2014.

Fig. 12 Schematic diagram of caking at internal diameter 06.015.
图 12 内径处结块示意图 [10] Gui Changlin. The archard design calculation model and its
application methods[J]. Lubrication Engineering, 1990, 15(1): 12–21
(in Chinese) [桂长林. Archard的磨损设计计算模型及其应用方法
方向端面磨损在稳态磨损阶段近似均匀，磨损率为常
[J]. 润滑与密封, 1990, 15(1): 12–21].
值. 在此基础上耦合密封环组件力、热变形，最终得到 [11] Gu Yongquan. Practical technology of mechanical seal[M]. Beijing:
密封泄漏量、端面温度等性能参数. 通过台架试验验 China Machine Press, 2001: 143–155(in Chinese) [顾永泉. 机械密
封实用技术[M]. 北京: 机械工业出版社, 2001: 143–155].
证了本文中所提出的考虑稳定磨损的半解析模型的
[12] Wei Long, Gu Boqin, Zhang Penggao. Wear prediction for end face
可行性. of contact mechanical seals[J]. Journal of Nanjing University of
b. 基于径向磨损均匀假设，可得到替代混合润滑 Technology (Natural Science Edition), 2012, 34(4): 16–21
模型的半解析方法求解密封界面近似固体接触力、流 (in Chinese) [魏龙, 顾伯勤, 张鹏高. 接触式机械密封端面磨损预
测[J]. 南京工业大学学报(自然科学版), 2012, 34(4): 16–21].
体承载力及介质膜厚分布.
[13] Kim Y W, Kim J H, Seo B H, et al. Mathematical model to evaluate
c. 耦合半解析模型和热力效应有限元模型，提出 wear rate of graphite as sealing materials[J]. Advanced Materials
稳定运行状态油润滑接触式端面密封性能与磨损的 Research, 2013, 871: 200–205. doi: 10.4028/www.scientific.net/amr.
871.200.
快速分析模型并得到试验验证，对密封性能分析和寿
[14] Yu Rufei, Li Pei, Chen Wei. A wear calculation and life prediction
命预测乃至优化设计均有重要意义. method with articulated clearance pairs[J]. Proceedings of the 17th
Annual Conference of China Association for Science and
参 考 文 献
Technology (CSTAC)-2 “ Machine Substitution” and Intelligent
[ 1 ] Sun J, Wei L, Gu B. Development course and research trend on the Manufacturing Forum-Improving the Pearl River Delta
mechanical seal[J]. Lubrication Engineering, 2004, 4: 128–131+134. Manufacturing Industry, 2015(in Chinese) [于如飞, 李培, 陈渭. 一
[ 2 ] Lebeck A O. Principles and design of mechanical face seals[M]. 种含间隙铰接副的磨损计算及寿命预测方法[J]. 第十七届中国科
John Wiley & Sons, 1991: 12-20 协年会--分2“机器换人”与智能制造论坛--提升珠三角制造业论
[ 3 ] Lebeck A O. Mixed lubrication in mechanical face seals with plain 文集, 2015].
faces[J]. Proceedings of the Institution of Mechanical Engineers, [15] Chang W R, Etsion I, Bogy D B. An elastic-plastic model for the
Part J: Journal of Engineering Tribology, 1999, 213(3): 163–175. contact of rough surfaces[J]. Journal of Tribology, 1987, 109(2):
doi: 10.1243/1350650991542910. 257–263. doi: 10.1115/1.3261348.
[ 4 ] Wen Qingfeng, Liu Ying, Huang Weifeng, et al. The effect of [16] Greenwood, J A, Williamson ’J. Contact of nominally flat
surface roughness on thermal-elasto-hydrodynamic model of contact surfaces[J]. Proceedings of the Royal Society of London Series A
mechanical seals[J]. Science China Physics, Mechanics and Mathematical and Physical Sciences, 1966, 295(1442): 300–319.
Astronomy, 2013, 56(10): 1920–1929. doi: 10.1007/s11433-013- doi: 10.1098/rspa.1966.0242.
5266-3. [17] Karaszkiewicz A. Geometry and contact pressure of an O-ring
[ 5 ] Kang Yuru, Meng Xiangkai, Peng Xudong, et al. Coupling model mounted in a seal groove[J]. Industrial & Engineering Chemistry
and performance analysis of hydrostatic mechanical seals for reactor Research, 1990, 29(10): 2134–2137. doi: 10.1021/ie00106a025.
coolant pumps[J]. Fluid Machinery, 2011, 39(11): 22–27 [18] Zhao Xingyu, Liu Ying, Huang Weifeng, et al. Mechanism of
(in Chinese) [康玉茹, 孟祥铠, 彭旭东, 等. 核主泵用流体静压型机 second stage mechanical seal in hydrostatic seal system of nuclear
械密封耦合模型与性能分析[J]. 流体机械, 2011, 39(11): 22–27]. coolant pumps[J]. Tribology, 2014, 34(4): 459–467 (in Chinese) [赵
doi: 10.3969/j.issn.1005-0329.2011.11.005. 星宇, 刘莹, 黄伟峰, 等. 核主泵静压型轴封系统二级密封机理研
[ 6 ] Zhou Xuhui, Zou Li. Simulation analysis of spherical mechanical 究[J]. 摩擦学学报, 2014, 34(4): 459–467]. doi: 10.16078/j.tribology.
seal property of marine stern shaft[J]. MATEC Web of Conferences, 2014.04.017.