Page 28 - 《摩擦学学报》2021年第1期

第 1 期 蒋金哲, 等: 新型TBM刀圈材料微观组织及耐磨性能研究 25

3 结论 023.
[ 8 ] Wei Jiabo, Cheng Xiaonong, Zhang Bocheng. Heat treatment of
a. 通过优化C、Cr合金元素，开发出的新型TBM刀 tunnel boring machine cutter ring for hard rock[J]. Heat Treatment
圈材料DB1具有较佳的强韧型配合，洛氏硬度与 of Metals, 2020, 45(2): 114–119 (in Chinese) [韦家波, 程晓农, 张
DC53钢基本一致，冲击功较DC53钢提高了97.21%. 伯承. 硬岩掘进盾构机刀圈的热处理[J]. 金属热处理, 2020, 45(2):
b. TBM刀圈的耐磨性不仅取决于材料强韧型，还 114–119].
[ 9 ] Chen Huan, Zhang Yinxia, Gao Wei. Research on quenching
与刀圈材料基体硬度以及一次碳化物尺寸、含量有关.
process of DC53 steel for TBM hob cutter rings[J]. Hot Working
较高的基体硬度可以减轻磨粒对磨损表面的切削深
Technology, 2017, 46(20): 208–213 (in Chinese) [陈欢, 张银霞, 郜
度和切削量；合理的碳化物含量及尺寸能够阻挡磨粒
伟. TBM滚刀刀圈用DC53钢淬火工艺的研究[J]. 热加工工艺,
的切削，从而保护材料基体，较少材料磨损量. 2017, 46(20): 208–213].
c. TBM刀圈材料与岩石硬度存在匹配性关系，只 [10] Jia Cili, Shen Yaoren, Qian Shiqiang, et al. Heat treatment process
有建立刀圈与特定岩石的良好匹配性，才能达到较好 of DC53 based on high toughness characteristic[J]. Hot Working
破岩效果. 本文中开发的新型DB1钢刀圈材料适用于 Technology, 2014, 43(2): 174–178 (in Chinese) [贾慈力, 沈耀仁,
钱士强, 等. 基于高韧性特性的DC53热处理工艺[J]. 热加工工艺,
中等抗压强度的大理石(抗压强度150 MPa左右).
2014, 43(2): 174–178].
参 考 文 献 [11] Xia Yimin, Mao Qingsong, Zhu Zongming, et al. Matching behavior
of hardness of TBM cutter ring and rock[J]. Tribology, 2016, 36(3):
[ 1 ] Qin Haiyang, Liu Houquan, Zhou Hui, et al. Development and
304–309 (in Chinese) [夏毅敏, 毛晴松, 朱宗铭, 等. TBM滚刀刀圈
prospect of hard rock tunnel boring machine in China[J]. Road
硬度与岩石匹配性能试验[J]. 摩擦学学报, 2016, 36(3): 304–309].
Machinery & Construction Mechanization, 2017, 34(2): 19–25
(in Chinese) [秦海洋, 刘厚全, 周慧, 等. 硬岩掘进机在中国的发展 [12] Lin L, Xia Y, Mao Q, et al. Experimental study on wear behaviors of
TBM disc cutter ring in hard rock conditions[J]. Tribology
与展望[J]. 筑路机械与施工机械化, 2017, 34(2): 19–25]. doi:
Transactions, 2018: 1–41.
10.3969/j.issn.1000-033X.2017.02.001.
[ 2 ] Jing Liujie, Zhang Na, Yang Chen. Development of TBM and its [13] Zhang X, Lin L, Xia Y, et al. Experimental study on wear of TBM
disc cutter rings with different kinds of hardness[J]. Tunnelling and
construction technologies in China[J]. Tunnel Construction, 2016,
(3): 87–93 (in Chinese) [荆留杰, 张娜, 杨晨. TBM及其施工技术在 Underground Space Technology, 2018, 82: 346–357. doi:
10.1016/j.tust.2018.08.050.
中国的发展与趋势[J]. 隧道建设, 2016, (3): 87–93].
[14] Kun Du, Chengzhi Yang, Rui Su, et al. Failure properties of cubic
[ 3 ] Liu Shuang. Analysis of domestic and foreign standardization for
full-face tunnel boring machine[J]. Construction Machinery, 2019, granite, marble, and sandstone specimens under true triaxial
(10): 18–21 (in Chinese) [刘双. 全断面隧道掘进机领域国内外标 stress[J]. International Journal of Rock Mechanics and Mining
准化工作简析[J]. 建筑机械, 2019, (10): 18–21]. Sciences, 2020, 130: 1–15.
[ 4 ] Wang Yuanhong. Analysis on influence factors of TBM [15] Shuai H, Changsheng L, Jinyi R, et al. Investigation on alloying
construction cost[J]. Design of Hydroelectric Power Station, 2019, element distribution in Cr8Mo2SiV cold-work die steel ingot during
35(2): 59–64 (in Chinese) [王元红. TBM施工成本影响因素分析 homogenization[J]. Steel Research International, 2018: 1800148.
[J]. 水电站设计, 2019, 35(2): 59–64]. [16] Yao Yuhuan, Zhang Libin, Wang Haiquan, et al. Relationship
[ 5 ] Chen Huan. Research on heat treatment process of materials of TBM between quenched martensite hardness of carbon steel and carbon
disc cutter rings[D]. Zhengzhou University, 2017(in Chinese) [陈欢. content[J]. Heat Treatment of Metals, 2014, 39(8): 136–138
TBM盘形滚刀刀圈材料热处理工艺研究[D]. 郑州: 郑州大学, (in Chinese) [姚玉环, 张立斌, 王海泉, 等. 碳钢淬火马氏体硬度与
2017.]. 含碳量的关系[J]. 金属热处理, 2014, 39(8): 136–138].
[ 6 ] Tang Huan, Du Shuiming. Research on heat treatment process for [17] Li Chenhui, Wu Xiaochun, Xie Chen, et al. Investigation on wear
H13E cutter ring for shield[J]. Rock Drilling Machinery & resistance of Cr8 tool steels[J]. Tribology, 2013, 33(1): 36–43
Pneumatic Tools, 2017(4): 37–42 (in Chinese) [唐欢, 杜水明. 盾构 (in Chinese) [李晨辉, 吴晓春, 谢尘, 等. Cr8型模具钢耐磨性能研
H13E刀圈的热处理工艺研究[J]. 凿岩机械气动工具, 2017(4): 究[J]. 摩擦学学报, 2013, 33(1): 36–43].
37–42]. [18] Badisch E, Mitterer C. Abrasive wear of high speed steels: Influence
[ 7 ] Yan Yun, Yue Caichao, Cai Qing. Study on high-temperature tensile of abrasive particles and primary carbides on wear resistance[J].
properties of H13E steel for cutting ring of shield tunneller[J]. Die & Tribology International, 2003, 36(10): 765–770. doi: 10.1016/S0301-
Mould Manufacture, 2018, 18(9): 86–90 (in Chinese) [燕云, 岳彩 679X(03)00058-6.
超, 蔡清. 盾构机滚刀刀圈材料H13E钢高温拉伸性能研究[J]. 模 [19] Liu Yue, Wei Shunhua, Zang Mengchao. Microstructure and impact
具制造, 2018, 18(9): 86–90]. doi: 10.3969/j.issn.1671-3508.2018.09. wear properties of high manganese steel[J]. Tribology, 2018, 38(3):