Page 135 - 《爆炸与冲击》2026年第5期

第 46 卷 位国旭，等： 钽合金EFP靶后破片的空间散布特性 第 5 期

HUANG X N, LI W B, LI W B, et al. Experimental research on the characteristics of behind-armor debris from explosively
formed projectile penetrating targets of different materials [J]. Acta Armamentarii, 2024, 45(1): 58–68. DOI: 10.12382/
bgxb.2022.0696.
[4] 邢柏阳, 赵建霞, 陈亮, 等. 爆炸成型弹丸垂直穿透钢板靶后破片飞散特性 [J]. 北京理工大学学报, 2022, 42(10): 1026–
1033. DOI: 10.15918/j.tbit1001-0645.2021.304.
XING B Y, ZHAO J X, CHEN L, et al. Disperse characteristic of behind-armor debris formed by explosively formed
penetrator vertically penetrating steel target [J]. Transactions of Beijing Institute of Technology, 2022, 42(10): 1026–1033.
DOI: 10.15918/j.tbit1001-0645.2021.304.
[5] 朱志鹏, 门建兵, 蒋建伟, 等. 大长径比钽爆炸成型弹丸控制研究 [J]. 兵工学报, 2018, 39(S1): 29–36. DOI: 10.3969/j.
issn.1000-1093.2018.S1.005.
ZHU Z P, MEN J B, JIANG J W, et al. Forming control of tantalum EFP with large aspect ratio [J]. Acta Armamentarii, 2018,
39(S1): 29–36. DOI: 10.3969/j.issn.1000-1093.2018.S1.005.
[6] 郭腾飞, 李伟兵, 李文彬, 等. 钽罩结构参数对 EFP 成型及侵彻性能的控制 [J]. 高压物理学报, 2018, 32(3): 035104. DOI:
10.11858/gywlxb.20170667.
GUO T F, LI W B, LI W B, et al. Controlling effect of tantalum liner’s structural parameters on EFP formation and
penetration performance [J]. Chinese Journal of High Pressure Physics, 2018, 32(3): 035104. DOI: 10.11858/gywlxb.
20170667.
[7] 门建兵, 卢易浩, 蒋建伟, 等. 杆式 EFP 用钽钨合金 JC 失效模型参数 [J]. 高压物理学报, 2020, 34(6): 065105. DOI:
10.11858/gywlxb.20200550.
MEN J B, LU Y H, JIANG J W, et al. Johnson-Cook failure model parameters of tantalum-tungsten alloy for rod-shaped
EFP [J]. Chinese Journal of High Pressure Physics, 2020, 34(6): 065105. DOI: 10.11858/gywlxb.20200550.
[8] 丁力, 蒋建伟, 王树有, 等. 钽爆炸成型弹丸成型及断裂特性 [J]. 兵工学报, 2021, 42(S1): 53–58. DOI: 10.3969/j.issn.1000-
1093.2021.S1.007.
DING L, JIANG J W, WANG S Y, et al. Tantalum EFP’s forming and fracture characteristics [J]. Acta Armamentarii, 2021,
42(S1): 53–58. DOI: 10.3969/j.issn.1000-1093.2021.S1.007.
[9] 邢柏阳, 侯云辉, 李泰华, 等. 爆炸成型弹丸垂直侵彻装甲钢靶后破片动能分析 [J]. 兵工学报, 2019, 40(10): 2014–2021.
DOI: 10.3969/j.issn.1000-1093.2019.10.006.
XING B Y, HOU Y H, LI T H, et al. Analysis of kinetic energy of behind-armor debris generated during the normal
penetration of EFP into armor steel [J]. Acta Armamentarii, 2019, 40(10): 2014–2021. DOI: 10.3969/j.issn.1000-1093.2019.
10.006.
[10] 邢柏阳, 郭锐, 侯云辉, 等. 爆炸成型弹丸贯穿靶板靶后破片空间分布模型 [J]. 国防科技大学学报, 2022, 44(4): 141–150.
DOI: 10.11887/j.cn.202204015.
XING B Y, GUO R, HOU Y H, et al. Spatial distribution model for behind-armor debris formed by the perforation of
explosively formed projectile through target [J]. Journal of National University of Defense Technology, 2022, 44(4): 141–150.
DOI: 10.11887/j.cn.202204015.
[11] 邢柏阳, 郭锐, 侯云辉, 等. 变截面爆炸成型弹丸垂直侵彻装甲钢板靶后破片轴向分布分析 [J]. 兵工学报, 2018, 39(S1):
62–65. DOI: 10.3969/j.issn.1000-1093.2018.S1.010.
XING B Y, GUO R, HOU Y H, et al. Analysis of velocity and mass axial distributions of behind-armor debris generated by
armor steel plate subjected to normal penetration of variable cross-section EFP [J]. Acta Armamentarii, 2018, 39(S1): 62–65.
DOI: 10.3969/j.issn.1000-1093.2018.S1.010.
[12] WANG X, JIANG J W, SUN S J, et al. Investigation on the spatial distribution characteristics of behind-armor debris formed
by the perforation of EFP through steel target [J]. Defence Technology, 2020, 16(1): 119–135. DOI: 10.1016/j.dt.2019.05.016.
[13] XING B Y, GUO R, HOU Y H, et al. The mass distribution of behind-armor debris generated during the normal penetration of
variable cross-section explosive formed projectile on rolled homogeneous armor steel [J]. International Journal of Impact
Engineering, 2019, 129: 12–25. DOI: 10.1016/j.ijimpeng.2019.02.008.
[14] XING B Y, ZHANG D J, GUO Z Y, et al. Analysis of the mass of behind-armor debris generated by RHA subjected to normal
penetration of variable cross-section EFP [J]. Defence Technology, 2019, 15(3): 390–397. DOI: 10.1016/j.dt.2018.10.006.
[15] WEI G X, GUO R, LI X D, et al. The mass distribution of behind-armor debris generated during the normal penetration of an

051433-15