Page 213 - 《振动工程学报》2025年第11期
P. 213

第 11 期            王 展,等:考虑球缺陷的全陶瓷角接触球轴承打滑及非线性振动特性研究                                        2671

                  performance  of  rolling  bearing  with  cage  flexibility  under  性能分析与试验研究  [J]. 航空动力学报,2024,39(8):
                  accelerating  conditions[J].  Mechanical  Systems  and  Signal  496-504.
                  Processing,2021,150:107257.                       ZHENG  Yanwei, LIU  Gongping, ZHAO  Binhai, et  al.
              [9]  GAO S,CHATTERTON S,NALDI L,et al. Ball bearing   Performance analysis and test research of high temperature and
                  skidding and over-skidding in large-scale angular contact ball  high  speed  hybrid  ceramic  ball  bearings[J].  Journal  of
                  bearings:nonlinear dynamic model with thermal effects and  Aerospace Power,2024,39(8):496-504.
                  experimental  results[J].  Mechanical  Systems  and  Signal  [19]  伊海铭,侯磊,高朋,等. 含中介轴承内圈局部缺陷的双
                  Processing,2021,147:107120.                       转 子 系 统 的 组 合 共 振 特性  [J].  航 空 动 力 学 报 , 2020,
              [10]  ATEF  M  M, KHAIR-ELDEEN  W, YAN  J  W, et  al.  A  35(9):1964-1976.
                  nonlinear  dynamic  analysis  of  skidding  behavior  in  rolling  YI  Haiming, HOU  Lei, GAO  Peng, et  al.  Combination
                  bearings using lubricant traction coefficients and cage flexibil-  resonance  characteristics  of  a  dual-rotor  system  with  a  local
                  ity[J]. Tribology International,2024,197:109756.  defect of inter-shaft bearing inner ring[J]. Journal of Aerospace
              [11]  景新,曹宏瑞,陈雪峰. 保持架打滑对航空发动机主轴承                      Power,2020,35(9):1964-1976.
                  故障特征频率的影响        [J]. 航空动力学报,2019,34(5):      [20]  郭宝良,赵玉秀,郑建校,等. 滚动轴承单一局部损伤故
                  1145-1152.                                        障变刚度动力学建模        [J]. 振动工程学报,2025,38(5):
                  JING  Xin, CAO  Hongrui, CHEN  Xuefeng.  Effect  of  cage  963-973.
                  slipping on fault characteristic frequencies of aeroengine main-  GUO  Baoliang, ZHAO  Yuxiu, ZHENG  Jianxiao, et  al.
                  shaft  bearings[J].  Journal  of  Aerospace  Power, 2019,  Dynamic  modeling  of  variable  stiffness  for  single  local
                  34(5):1145-1152.                                  damage fault of rolling bearing[J]. Journal of Vibration Engi-
              [12]  彭城,曹宏瑞,朱玉彬,等. 三点接触球轴承打滑动力学                      neering,2025,38(5):963-973.
                  分析与验证    [J]. 机械工程学报,2023,59(1):123-130.      [21]  ZHANG  X, BAI  C, JIN  Y  L, et  al.  Nonlinear  vibration
                  PENG Cheng,CAO Hongrui,ZHU Yubin,et al. Dynamic   characteristics  of  a  rotor  bearing  system  with  irregular  race-
                  analysis  and  verification  on  skidding  behavior  of  three-point  way  defect[J].  Nonlinear  Dynamics, 2025, 113( 10) :
                  contact  ball  bearings[J].  Journal  of  Mechanical  Engineering,  11259-11281.
                  2023,59(1):123-130.                           [22]  NIU L K,CAO H R,HOU H P,et al. Experimental obser-
              [13]  XU  C, WU  T  H, YANG  H  B, et  al.  Study  on  vibration  vations and dynamic modeling of vibration characteristics of a
                  mechanism  induced  by  skidding  in  pure  rolling  contact[J].  cylindrical  roller  bearing  with  roller  defects[J].  Mechanical
                  Tribology International,2021,154:106669.          Systems and Signal Processing,2020,138:106553.
              [14]  李峰,邓四二,张文虎. 频繁摆动工况下球轴承打滑特性                  [23]  MUFAZZAL S,MUZAKKIR S,KHANAM S. A dynamic
                  研究  [J]. 机械工程学报,2021,57(1):168-178.               model for simulating vibration response of ball bearings with
                  LI Feng,DENG Sier,ZHANG Wenhu. Skidding character-  extended outer race defects for precise spall size estimation[J].
                  istics  of  ball  bearings  withstanding  a  frequent  oscillating  Journal of Sound and Vibration,2023,552:117606.
                  condition[J].  Journal  of  Mechanical  Engineering, 2021,  [24]  LIU  J, WANG  L  F, SHI  Z  F.  Dynamic  modelling  of  the
                  57(1):168-178.                                    defect  extension  and  appearance  in  a  cylindrical  roller
              [15]  TU  W  B, YU  W  N, SHAO  Y  M, et  al.  A  nonlinear  bearing[J].  Mechanical  Systems  and  Signal  Processing,
                  dynamic vibration model of cylindrical roller bearing consider-  2022,173:109040.
                  ing skidding[J]. Nonlinear Dynamics,2021,103(3):2299-  [25]  LI N,ZHANG J Q,MENG X Y,et al. Dynamic response
                  2313.                                             and  failure  analysis  of  bearing  under  the  impact  of  vibration
              [16]  于庆杰,张家铭,孙志强. 高速滚动轴承打滑动力学理论                      excitation[J].  Engineering  Failure  Analysis, 2023, 154:
                  和试验研究进展     [J]. 轴承,2025(7):1-12.                 107640.
                  YU Qingjie,ZHANG Jiaming,SUN Zhiqiang. Advances in  [26]  雷春丽,薛伟,樊高峰,等. 考虑内、外圈复合故障的角
                  dynamics  theory  and  experimental  research  on  skidding  of  接 触 球 轴 承 振 动 特 性 研究  [J].  振 动 与 冲 击 , 2024,
                  high-speed rolling bearings[J]. Bearing,2025(7):1-12.  43(14):275-283.
              [17]  高帅,韩勤锴,褚福磊. 考虑热流固耦合的角接触滚动轴                      LEI  Chunli, XUE  Wei, FAN  Gaofeng, et  al.  Dynamic
                  承动力学特性及打滑状态分析          [J]. 机械工程学报,2022,          modeling of angular contact ball bearings considering compos-
                  58(9):87-97.                                      ite defects in inner and outer rings[J]. Journal of Vibration and
                  GAO Shuai,HAN Qinkai,CHU Fulei. Analysis of dynamic  Shock,2024,43(14):275-283.
                  characteristics and skidding state of angular contact bearing by  [27]  王展,陈思阳,王子男,等. 考虑动态波纹的陶瓷轴承-转
                  thermo-hydro-elasto-dynamic  coupling  model[J].  Journal  of  子系统非线性振动特性研究  [J]. 机械工程学报,2024,
                  Mechanical Engineering,2022,58(9):87-97.          60(23):189-204.
              [18]  郑艳伟,刘公平,赵滨海,等. 高温高速混合陶瓷球轴承                      WANG  Zhan, CHEN  Siyang, WANG  Zinan, et  al.
   208   209   210   211   212   213   214   215   216   217   218