Page 62 - 摩擦学学报2025年第9期

1316 摩擦学学报（中英文） 第 45 卷

[16] Shi Z, Bloyce A, Sun Y, et al. Influence of surface melting on dry [24] Chen Jinhua, Li Shuxin, Lu Siyuan, et al. Damage analysis at
rolling-sliding wear of aluminium bronze against steel[J]. Wear, surface inclusion in rolling contact fatigue of bearing steels[J].
1996, 198(1-2): 300–306. doi: 10.1016/0043-1648(96)07205-5. Tribology, 2024, 44(3): 267–279 (in Chinese) [陈金华, 李淑欣, 鲁
[17] Gao Qingyuan, Li Shuxin, Su Yunshuai. Investigation on formation 思渊, 等. 轴承钢滚动接触疲劳亚表面夹杂处损伤分析[J]. 摩擦学
mechanism of nano-gradient structure in dry sliding wear of 学 报 (中 英 文 ), 2024, 44(3): 267–279]. doi: 10.16078/j.tribology.
martensite steel[J]. Tribology, 2019, 39(6): 698–705 (in Chinese) 2023012.
[高清远, 李淑欣, 苏云帅. 马氏体钢干滑动磨损纳米梯度结构的 [25] Müser M. Valentin L. popov: contact mechanics and friction:
形成机理研究[J]. 摩擦学学报, 2019, 39(6): 698–705]. doi: 10. physical principles and applications[J]. Tribology Letters, 2010,
16078/j.tribology.2019124. 40(3): 395. doi: 10.1007/s11249-010-9673-6.
[18] Yin Cunhong, Liang Yilong. Friction induced wear and martensite [26] McEwen E. Stresses in elastic cylinders in contact along a
deformation behavior of 20CrNi 2 Mo steel[J]. Iron & Steel, 2017, generatrix[J]. Philosophical Magazine, 1949, 40(303): 454–459. doi:
52(8): 81–86 (in Chinese) [尹存宏, 梁益龙. 20CrNi 2 Mo钢干摩擦 10.1080/14786444908521733.
磨损行为及次表层马氏体形变[J]. 钢铁, 2017, 52(8): 81–86]. doi: [27] Chen Kangmin, Wang Shuqi, Yang Zirun, et al. High temperature
10.13228/j.boyuan.issn0449-749x.20160543. wear and oxide film of steels[J]. Tribology, 2008, 28(5): 475–479
[19] Zhao Xin, Jing Tianfu, Gao Yuwei, et al. Grain-refining mechanism (in Chinese) [陈康敏, 王树奇, 杨子润, 等. 钢的高温氧化磨损及氧
of severe rolling to lath martensite[J]. Journal of Iron and Steel 化物膜的研究[J]. 摩擦学学报, 2008, 28(5): 475–479]. doi: 10.
Research, 2004, 16(6): 69–73 (in Chinese) [赵新, 荆天辅, 高聿为, 3321/j.issn:1004-0595.2008.05.017.
等. 板条马氏体大变形轧制工艺的晶粒细化机制[J]. 钢铁研究学 [28] Kwan J L Y, Chan W. Comparing standardized coefficients in
报, 2004, 16(6): 69–73]. doi: 10.3321/j.issn:1001-0963.2004.06.015. structural equation modeling: a model reparameterization
[20] Yang Yang. Effect of niobium and molybdenum on microstructure approach[J]. Behavior Research Methods, 2011, 43(3): 730–745.
and properties of low alloy wear-resistant steel[D]. Zhengzhou: doi: 10.3758/s13428-011-0088-6.
Zhengzhou University, 2007 (in Chinese) [杨杨. 铌、钼对低合金耐 [29] Yin Cunhong, Liang Yilong. Mechanical and microscopic formation
磨钢组织和性能的影响[D]. 郑州: 郑州大学, 2007]. mechanism of wear cracks in a friction-induced layer of martensitic
[21] Wang S Q, Wei M X, Zhao Y T. Effects of the tribo-oxide and steels[J]. Journal of Iron and Steel Research, 2020, 32(4): 322–328
matrix on dry sliding wear characteristics and mechanisms of a cast (in Chinese) [尹存宏, 梁益龙. 马氏体钢干摩擦表层磨损裂纹形成
steel[J]. Wear, 2010, 269(5-6): 424–434. doi: 10.1016/j.wear.2010. 的力学条件和微观机制[J]. 钢铁研究学报, 2020, 32(4): 322–328].
04.028. doi: 10.13228/j.boyuan.issn1001-0963.20190171.
[22] Singh P P, Ghosh S, Mula S. Characterization of dry-sliding wear [30] Chen Xiang, Han Zhong, Li Xiuyan, et al. Lowering coefficient of
phenomena in a novel martensitic structure based low-carbon Nb friction in Cu alloys with stable gradient nanostructures[J]. Science
and V alloyed steel[J]. Tribology International, 2023, 189: 108959. Advances, 2016, 2(12): e1601942. doi: 10.1126/sciadv.1601942.
doi: 10.1016/j.triboint.2023.108959. [31] Jonhson K L. Contact mechanics[M]. Cambridge: Cambridge
[23] Wang Z B, Tao N R, Li S, et al. Effect of surface nanocrystallization University Press, 1992.
on friction and wear properties in low carbon steel[J]. Materials [32] Hamilton G M, Goodman L E. The stress field created by a circular
Science and Engineering: A, 2003, 352(1-2): 144–149. doi: 10.1016/ sliding contact[J]. Journal of Applied Mechanics, 1966, 33(2): 371.
S0921-5093(02)00870-5. doi: 10.1115/1.3625051.