Page 61 - 摩擦学学报2025年第9期

第 9 期 孙林宇, 等: 在线淬火低合金高强马氏体耐磨钢滑动磨损性能 1315

分别为0.95、0.98和0.86，表明1#钢与2#钢在较低载荷 46(6): 69–73 (in Chinese) [李灿明. 淬火工艺对耐磨钢NM400组织
下耐磨性相似，两者磨损程度差异仅为3%~5%，在高 性能的影响[J]. 金属热处理, 2021, 46(6): 69–73]. doi: 10.13251/j.
载荷下1#钢与2#钢的磨损程度差异为13%，表明2#钢 issn.0254-6051.2021.06.014.
[ 7 ] Hu Derui. A comparative study on wear properties of NM450 and
在较高载荷下更耐磨. 因此，在磨损性能要求不高的
NM550 martensitic wear-resistant steel[D]. Maanshan: Anhui
工况下，从材料炼钢成本上考虑，推荐采用合金元素
University of Technology, 2019 (in Chinese) [胡德锐. NM450和
含量低的1#耐磨钢. NM550马氏体耐磨钢的磨损性能对比研究[D]. 马鞍山: 安徽工业
b. 摩擦系数随载荷的增加和材料硬度的增加均 大学, 2019].
呈下降趋势，但相较于硬度，摩擦系数对载荷的敏感 [ 8 ] Luo Deng, Wen Changfei, Zheng Jian, et al. Effect of quenching
性更高，且随着载荷的增加这种趋势越来越明显. temperature on microstructure and properties of NM550 steel[J].
c. 载荷越大，接触应力越大，但载荷的增加同时 Heat Treatment of Metals, 2019, 44(4): 180–184 (in Chinese) [罗登,
温长飞, 郑健, 等. 淬火温度对NM550钢组织和性能的影响[J]. 金
会降低摩擦系数，而接触应力随摩擦系数的减小而降
属热处理, 2019, 44(4): 180–184]. doi: 10.13251/j.issn.0254-6051.
低，表明外加载荷和摩擦系数对接触应力的影响呈竞
2019.04.037.
争关系，本研究中外加载荷对接触应力大小起主要决 [ 9 ] Zhu Qinghua, Yan Qiangjun, Ge Xin, et al. Effects of quenching
定作用. process on microstructure and mechanical properties of NM600
grade wear resistant steel[J]. Wide and Heavy Plate, 2022, 28(1):
参 考 文 献
6–10 (in Chinese) [朱庆华, 闫强军, 葛昕, 等. 淬火工艺对高等级
[ 1 ] Wei Shizhong, Xu Liujie. Review on research progress of steel and 耐磨钢NM600组织及性能的影响[J]. 宽厚板, 2022, 28(1): 6–10].
iron wear-resistant materials[J]. Acta Metallurgica Sinica, 2020, doi: 10.3969/j.issn.1009-7864.2022.01.002.
56(4): 523–538 (in Chinese) [魏世忠, 徐流杰. 钢铁耐磨材料研究 [10] Qiu Han, Li Jie, Tu Xiaohui, et al. Effect of in situ autogenic TiC on
进 展 [J]. 金 属 学 报 , 2020, 56(4): 523–538]. doi: 10.11900/0412. abrasive wear properties of a low alloy martensitic steel[J].
1961.2019.00370. Tribology, 2021, 41(3): 357–364 (in Chinese) [邱涵, 李杰, 涂小慧,
[ 2 ] Yuan Guo, Wang Guodong, Wang Riqing, et al. Development of 等. 原位自生TiC对低合金马氏体钢磨料磨损性能的影响[J]. 摩擦
heat treatment technology and equipment for medium and heavy 学学报, 2021, 41(3): 357–364]. doi: 10.16078/j.tribology.2020159.
steel plate[J]. Journal of Iron and Steel Research, 2009, 21(5): 1–7 [11] Liu Yanjie, Chen Weihua, Qu Dingfeng, et al. Molecular dynamics
(in Chinese) [袁国, 王国栋, 王日清, 等. 中厚钢板热处理技术及设 study of tribological properties of Ni–Cr alloy coatings with
备发展概况[J]. 钢铁研究学报, 2009, 21(5): 1–7]. doi: 10.13228/j. different pore shapes[J]. Vacuum, 2024, 225: 113232. doi: 10.1016/
boyuan.issn1001-0963.2009.05.002. j.vacuum.2024.113232.
[ 3 ] Zhou Nan, Qi Wenjun, Cai Chang. Research status of on-line [12] Wang Quanli, Lu Shiping, Ma Longteng, et al. Development and
quenching technology and equipment of aluminum alloy profiles in application of online quenching technology for enhancing toughness
China[J]. Materials Research and Application, 2011, 5(3): 186– of high strength steel[J]. Iron & Steel, 2023, 58(8): 149–156,168 (in
189,217 (in Chinese) [周楠, 戚文军, 蔡畅. 国内铝型材在线淬火技 Chinese) [王全礼, 路士平, 马龙腾, 等. 高强钢增强韧性的在线淬
术 与 装 备 的 研 究 现 状 [J]. 材 料 研 究 与 应 用 , 2011, 5(3): 火技术开发与应用[J]. 钢铁, 2023, 58(8): 149–156,168]. doi: 10.
186–189,217]. doi: 10.3969/j.issn.1673-9981.2011.03.005. 13228/j.boyuan.issn0449-749x.20230198.
[ 4 ] Hu Rirong, Cai Qingwu, Wu Huibin, et al. Heat treatment influence [13] Dai Qixun. Metal material science[M]. 2nd ed. Beijing: Chemical
on the microstructure and mechanical properties of NM500 wear Industry Press, 2012 (in Chinese) [戴起勋. 金属材料学[M]. 2版. 北
resistant steel[J]. Journal of University of Science and Technology 京: 化学工业出版社, 2012].
Beijing, 2013, 20(8): 1015–1020 (in Chinese) [胡日荣, 蔡庆伍, 武 [14] Wang Yunpeng, Sun Kun, Yang Size, et al. Friction and wear
会宾, 等. 热处理工艺对NM500耐磨钢组织和力学性能的影响[J]. characteristics of 18Ni(300) steel at high speed dry sliding
北京科技大学学报, 2013, 35(8): 1015–1020]. condition[J]. Tribology, 2017, 37(2): 218–224 (in Chinese) [王云鹏,
[ 5 ] Yan Kai, Wang Huanhuan, Lin Naiming, et al. Numerical simulation 孙琨, 杨思泽, 等. 18Ni(300)钢高速干滑动摩擦磨损特性研究[J].
on wear behavior of 0Cr 18 Ni 9 Ti-U71Mn friction pairs under high- 摩擦学学报, 2017, 37(2): 218–224]. doi: 10.16078/j.tribology.2017.
speed and heavy-load conditions[J]. Tribology, 2023, 43(6): 02.011.
666–681 (in Chinese) [严凯, 王焕焕, 林乃明, 等. 0Cr18Ni9Ti- [15] Han Ruyang, Yang Gengwei, Zhao Gang, et al. Strengthening
U71Mn摩擦副高速重载磨损行为的数值模拟[J]. 摩擦学学报, mechanism and three-body impact abrasive wear behavior of the
2023, 43(6): 666–681]. doi: 10.16078/j.tribology.2022040. hot-rolled air-cooling martensitic wear resistant steel[J]. Journal of
[ 6 ] Li Canming. Effect of quenching on microstructure and properties of Materials Research and Technology, 2023, 24: 3023–3032. doi: 10.
wear-resistant steel NM400[J]. Heat Treatment of Metals, 2021, 1016/j.jmrt.2023.03.216.