Page 29 - 摩擦学学报2025年第9期
P. 29

第 9 期                        刘傲, 等: Cr 12 MoV模具钢表面微织构润滑减阻研究                                 1283

            [14]   Li  Dongzhi,  Ma  Chenbo,  Sun  Jianjun,  et  al.  CFD  analysis  of  unsteady  structure  of  sheet/cloud  cavitation  around  a  two-
                 tribological properties of inclined texture surface with consideration  dimensional stationary hydrofoil[J]. Proceedings of the Institution of
                 of  cavitation[J].  Lubrication  Engineering,  2018,  43(8):  76–81  (in  Mechanical  Engineers,  Part  E:  Journal  of  Process  Mechanical
                 Chinese) [李东志, 马晨波, 孙见君, 等. 考虑空化的倾斜织构表面           Engineering,   2017,   231(3):   455–469.   doi:   10.1177/
                 摩擦学性能CFD分析[J]. 润滑与密封, 2018, 43(8): 76–81]. doi: 10.  0954408915607390.
                 3969/j.issn.0254-0150.2018.08.012.            [23]   Ma Xuezhong. Study on cavitation and inertia effect of high-speed
            [15]   Xu Ping, Luo Jing, Yu Yinghua, et al. Study on the performance and  spiral groove end seal fluid[D]. Hangzhou: Zhejiang University of
                 optimal design of friction pair of textured disk[J]. China Mechanical  Technology, 2019 (in Chinese) [马学忠. 高速螺旋槽端面密封流体
                 Engineering, 2024, 35(10): 1774-1782 (in Chinese) [徐平, 罗晶, 于  空化与惯性效应研究[D]. 杭州: 浙江工业大学, 2019].
                 英华, 等. 织构化盘式摩擦副性能及优化设计研究[J]. 中国机械工            [24]   Li Pengyang, Zhang Fan, Zhang Hao, et al. Lubrication performance
                 程, 2024, 35(10): 1774-1782].                      of  kite-shaped  microtexture  under  hydrodynamic  lubrication[J].
            [16]   Zhang  Yu,  Chen  Guoding,  Wang  Lin,  et  al.  Analysis  of  bearing  Tribology International, 2023, 179: 108144. doi: 10.1016/j.triboint.
                 Load?  Carrying  capacity  with  asymmetric  surface  textures  under  2022.108144.
                 coupling  effects  of  cavitation  and  inertia  effect[J].  Journal  of  [25]   Gao Hao, Long Wei, Wang Pengyang, et al. Experimental study of
                 Northwestern Polytechnical University, 2017, 35(6): 1026–1032 (in  lubrication and friction reduction behavior and influencing factors of
                 Chinese) [张瑜, 陈国定, 王琳, 等. 空化与惯性效应耦合作用下的           pits  micro-texture[J].  Mechanical  Science  and  Technology  for
                 非对称表面微织构滑块承载力分析[J]. 西北工业大学学报, 2017,               Aerospace Engineering, 2025, 44(1): 117–125 [高浩, 龙威, 王鹏洋,
                 35(6): 1026–1032]. doi: 10.3969/j.issn.1000-2758.2017.06.014.  等. 凹坑型微织构润滑减摩及影响因素实验研究[J]. 机械科学与
            [17]   Hao  Jiali,  Zheng  Qingchun,  Zhang  Chunqiu,  et  al.  Study  on  技 术 ,  2025,  44(1):  117–125].  doi:  10.13433/j.cnki.1003-8728.
                 tribological  properties  of  artificial  hip  textured  surfaces[J].  20230141.
                 Lubrication Engineering, 2023, 48(12): 55–61 (in Chinese) [郝佳丽,  [26]   Byun J W, Shin H S, Kwon M H, et al. Surface texturing by micro
                 郑清春, 张春秋, 等. 人工髋关节织构化表面摩擦学性能研究[J].                ECM  for  friction  reduction[J].  International  Journal  of  Precision
                 润滑与密封, 2023, 48(12): 55–61]. doi: 10.3969/j.issn.0254-0150.  Engineering  and  Manufacturing,  2010,  11(5):  747–753.  doi:  10.
                 2023.12.008.                                      1007/s12541-010-0088-y.
            [18]   Lv Yonggang, Rao Xiang, Guo Zhiwei. Effect of bionic texture on  [27]   Pratap  T,  Patra  K.  Tribological  performances  of  symmetrically
                 tribological  properties  of  cylinder  liner-piston  ring[J].  Lubrication  micro-textured Ti-6Al-4V alloy for hip joint[J]. International Journal
                 Engineering, 2022, 47(5): 52–59 (in Chinese) [吕永刚, 饶响, 郭智  of Mechanical Sciences, 2020, 182: 105736. doi: 10.1016/j.ijmecsci.
                 威. 仿生织构形态对缸套-活塞环摩擦学性能的影响[J]. 润滑与密                 2020.105736.
                 封, 2022, 47(5): 52–59]. doi: 10.3969/j.issn.0254-0150.2022.05.008.  [28]   Ma  Wenlin,  Zhao  Jian,  Wang  Fubo.  Effect  of  textured  surface  on
            [19]   Mao Yixuan, Wang Yingzhu, Li Tao, et al. Effect of the asymmetric  friction and wear properties of 45 steel[J]. Tribology, 2023, 43(3):
                 duct  on  the  ship-propeller  cavitation  performance[J].  Journal  of  314–324 (in Chinese) [马文林, 赵健, 王府伯. 织构化表面对45钢
                 Harbin Engineering University, 2021, 42(7): 959–966 (in Chinese)  摩擦磨损性能的影响[J]. 摩擦学学报, 2023, 43(3): 314–324]. doi:
                 [毛翼轩, 王英铸, 李涛, 等. 不对称导管对船后桨空化性能的影                 10.16078/j.tribology.2021290.
                 响[J]. 哈尔滨工程大学学报, 2021, 42(7): 959–966]. doi: 10.11990/  [29]   Pan Yingzhuo, Lv Baohua, Ma Kai, et al. Tribological behavior of
                 jheu.202002020.                                   Si 3 N 4   ceramics  and  M50  steel  with  limited  oil  at  high
            [20]   Schnerr G H, Sauer J. Physical and numerical modeling of unsteady  temperature[J]. Tribology, 2024, 44(2): 200–213 (in Chinese) [潘盈
                 cavitation dynamics[C]//4th International Conference on Multiphase  卓, 吕宝华, 马楷, 等. 高温环境Si 3 N 4 陶瓷与M50钢材料的球盘配
                 Flow, New Orleans, 2001.                          副与润滑油量对摩擦学行为的影响研究[J]. 摩擦学学报(中英文),
            [21]   Ma  Ruxiang,  Hong  Liang,  Wang  Pengcheng.  Research  on  2024, 44(2): 200–213]. doi: 10.16078/j.tribology.2022246.
                 hydrodynamic and cavitation characteristics of a propeller KP458[J].  [30]   Yu Zifeng, Li Difan, Shao Yonglin, et al. Effect of temperature on
                 Journal of Ordnance Equipment Engineering, 2023, 44(7): 170–177  dry sliding tribological behavior of 7A04 pin-50CrMo 4  disc contact
                 (in Chinese) [马如相, 洪亮, 汪鹏程. KP458螺旋桨水动力及空泡        pair[J]. Tribology, 2023, 43(10): 1189–1200 (in Chinese) [余梓枫,
                 特性研究[J]. 兵器装备工程学报, 2023, 44(7): 170–177]. doi: 10.  李迪凡, 邵泳林, 等. 温度对7A04铝销-50CrMo4钢盘摩擦副干滑
                 11809/bqzbgcxb2023.07.023.                        动摩擦磨损行为的影响[J]. 摩擦学学报, 2023, 43(10): 1189–
            [22]   Hong  Feng,  Yuan  Jianping,  Zhou  Banglun,  et  al.  Modeling  of  1200]. doi: 10.16078/j.tribology.2022167.
   24   25   26   27   28   29   30   31   32   33   34