Page 97 - 《摩擦学学报》2020年第3期

第 3 期 王军锋, 等: 基于载荷谱的凸轮机构关键摩擦副优化研究 363

2001, 21(3): 161–166]. doi: 10.3321/j.issn:1004-0595.2001.03.001. (in Chinese) [桂长林. Archard的磨损设计计算模型及其应用方法
[11] Colaco R, Vilar R. A model for the abrasive wear of metallic matrix [J]. 润滑与密封, 1990(1): 12–21].
particle-reinforced materials[J]. Wear, 2003, 254(7-8): 625–634. doi:
[16] Li Xia, Jin Xuesong, Hu Dong. Theoretical model and numerical
10.1016/S0043-1648(03)00185-6.
method of wheel profile wear[J]. Journal of Mechanical
[12] Ming S, Wang J, Cai Z, et al. Load distribution measurement
Engineering, 2009, 45(9): 193–200 (in Chinese) [李霞, 金学松, 胡
instrument for oscillating follower cam mechanism[J]. Review of
东. 车轮磨耗计算模型及其数值方法[J]. 机械工程学报, 2009,
Scientific Instruments, 2019, 90(4): 045114. doi: 10.1063/1.5090
45(9): 193–200]. doi: 10.3901/JME.2009.09.193.
166.
[13] Wen Shizhu, Huang Ping. Pinciples of tribology[M]. Beijing: [17] Liou J W, Chen L H, Lui T S. The concept of effective hardness in
Tsinghua University Press, 2018(in Chinese) [温诗铸, 黄平. 摩擦学 the abrasion of coarse two-phase materials with hard second-phase
原理[M]. 北京: 清华大学出版社, 2018]. particles[J]. Journal of Materials Science, 1995, 30(1): 258–262. doi:
[14] Ma Guozheng, Xu binshi, Wang Haidou, et al. Effect of surface 10.1007/BF00352159.
nanocrystallization pretreatment on the tribological properties of
[18] Zum Gahr K H. Microstructure and wear of materials[M]. Elsevier,
sulfide layers of 1Cr18Ni9Ti stainless steel[J]. Journal of
1987.
Mechanical Engineering, 2011, 47(11): 75–81 (in Chinese) [马国政,
[19] Xu Xiangyang, Xu Binshi, Liu Wenjin, et al. Fretting wear behavior
徐滨士, 王海斗, 等. 表面纳米化预处理对1Cr18Ni9Ti不锈钢渗硫
of 1Cr18Ni9Ti stainless steel in sliding regime[J]. Tribology, 2002,
层摩擦学性能的影响[J]. 机械工程学报, 2011, 47(11): 75–81]. doi:
22(6): 4442448 (in Chinese) [徐向阳, 徐滨士, 刘文今, 等. 1Cr18Ni9Ti
10.3901/JME.2011.11.075.
[15] Gui Changlin. The archard design calculation model and its 不锈钢在滑移区的微动磨损行为[J]. 摩擦学学报, 2002, 22(6):
application methods[J]. Lubrication Engineering, 1990(1): 12 –21 4442448]. doi: 10.16078/j.tribology.2002.06.008.