Page 127 - 《摩擦学学报》2020年第3期

第 3 期 章武林, 等: 磨石强度对钢轨打磨行为的影响 393

弱，塑性变形层在钢轨表面逐渐累积，使钢轨面晶粒 10.3901/JME.2018.22.184.
细化层和塑性变形层进一步增大 [21] . 剖面形貌的 [ 5 ] Jin Xuesong, Du Xing, Guo Jun, et al. State of arts of research on
rail grinding[J]. Journal of Southwest Jiaotong University, 2010,
SEM照片表明，在钢轨表面的晶粒细化层中存在裂纹
45(1): 1–11 (in Chinese) [金学松, 杜星, 郭俊, 等. 钢轨打磨技术研
和剥层现象. 研究表明，打磨后钢轨表面的裂纹主要
究进展[J]. 西南交通大学学报, 2010, 45(1): 1–11]. doi: 10.3969/
在白层和塑性变形层之间的界面萌生和扩展，使钢轨
j.issn.0258-2724.2010.01.001.
产生预疲劳，从而降低钢轨的使用寿命和服役安全 [ 6 ] Zhou kun, Ding Haohao, et al. Influence of grinding pressure on
性 [20-21] . 因此磨石强度的合理选择，可以有效减少钢轨 removal behaviours of rail material[J]. Tribology International,
表面白层和塑性变形层的厚度，提高钢轨服役安全性 2019, 134: 417–426. doi: 10.1007/s00170-017-0498-4.

和可靠性. [ 7 ] Zhang Shuyue, Zhou Kun, Wang Wenjian, et al. Effects of grinding
parameters on the wear of grinding stone and rail material
3 结论 removial[J]. Tribology, 2018, 38(3): 327–333 (in Chinese) [张沭玥,

周坤, 王文健, 等. 打磨参数对钢轨打磨磨石磨损与材料去除影响
a. 通过调控磨石配方制备了三种不同强度的磨
研究[J]. 摩擦学学报, 2018, 38(3): 327–333]. doi: 10.16078/j.tribology.
石. 打磨试验结果表明，增大磨石强度，可以提高磨石
2018.03.010.
的耐磨性，但磨石的自锐性变差，磨削能力下降. [ 8 ] Uhlmann Eckart, Lypovka Pavlo, et al. Influence of rail grinding
b. 磨石强度降低，磨石的主要磨削机制逐渐从耕 process parameters on rail surface roughness and surface layer
犁转变为切削，且磨粒切削作用是导致磨削热的首要 hardness[J]. Wear, 2016, 366-367: 287–293. doi: 10.1016/j.wear.2016.
因素，过大的磨削热将导致钢轨面材料严重氧化甚至 03.023.
[ 9 ] Kanematsu Yoshikazu, Satoh Yukio. Influence of type of grinding
出现“蓝色烧伤”.
stone on rail grinding efficiency[J]. Quarterly Report of RTRI, 2011,
c. 磨石强度增大，磨石中磨粒的耕犁作用加剧，
52(2): 97–102. doi: 10.2219/rtriqr.52.97.
钢轨表面白层和塑性变形层厚度增大，钢轨产生更严
[10] Wang Wenjian, Gu Kaikai, et al. Influence of granularity of grinding
重的“预疲劳”，将导致打磨后钢轨服役安全性下降. stone on grinding force and material removal in the rail grinding
d. 对磨石强度的合理调控可以实现钢轨打磨效 process[J]. Proceedings of the Institution of Mechanical Engineers
率和钢轨表面质量的高度协调，研究结果可为磨石性 Part J-Journal of Engineering Tribology, 2018, 233(2): 355 –365.
能的调控以及线路钢轨打磨磨石的选型提供重要理 doi: 10.1177/1350650118779495.
[11] GB/T2481.1-1998. Bonded abrasives-Determination and designation
论参考.
of grain size distribution-Part 1: Macrogrits F4 to F220[S]. Beijing:
参 考 文 献
State Administration for Market Regulation(in Chinese) [GB/T2481.
[ 1 ] National Development and Reform Commission. The 13th five-year 1-1998. 固结磨具用磨料粒度组成的检测和标记第1部分: 粗磨粒
F4~F220[S]. 北京: 国家质量技术监督局, 1998].
plan for railways[R]. Beijing: China Railways Corporation, 2017(in
Chinese) [国家发展和改革委员会. 铁路“十三五”发展规划[R]. 北 [12] China Railways Corporation. Q/CR 1-2014. China Railway
京: 中国铁路总公司, 2017]. Corporation Enterprise Standard: Technical specifications for the
[ 2 ] Zhai Wanming, Zhao Chunfa. Frontiers and challenges of sciences procurement of grinding wheel for the rail grinding train[S]. Beijing:
and technologies in modern railway engineering[J]. Journal of China Railway Publishing House Co, LTD, 2014: 1-13(in Chinese)
Southwest Jiaotong University, 2016, 51(2): 209–226 (in Chinese) [中国铁路总公司. Q/CR 1-2014, 中国铁路总公司企业标准: 钢轨
[翟婉明, 赵春发. 现代轨道交通工程科技前沿与挑战[J]. 西南交 打磨车磨石订货技术条件[S].北京: 中国铁道出版社, 2014: 1-13].
通 大 学 学 报 , 2016, 51(2): 209 –226]. doi: 10.3969/j.issn.0258- [13] Zhou Yan, Cai Zhenbing, et al. Tribo-chemical behavior of eutectoid
2724.2016.02.001. steel during rolling contact friction[J]. Applied Surface Science,
[ 3 ] Zhong Wen. Experimental investigation of rail damnification 2016, 388: 40–48. doi: 10.1016/j.apsusc.2016.04.174.
mechanism[D]. Chengdu: Southwest Jiaotong University, 2011(in [14] Öpöz Tahsin Tecelli, Chen Xun. Experimental investigation of
Chinese) [钟雯. 钢轨的损伤机理研究[D]. 成都: 西南交通大学, material removal mechanism in single grit grinding[J]. International
2011. doi: 10.7666/d.y1957679]. Journal of Machine Tools and Manufacture, 2012, 63: 32–40. doi:
[ 4 ] Fan Wengang, Liu Yueming, Li Jianyong, et al. Development status 10.1016/j.ijmachtools.2012.07.010.
and prospect of rail grinding technology for high speed railway[J]. [15] Lin Bin, Zhou Kun, et al. Influence of grinding parameters on
Journal of Mechanical Engineering, 2018, 54(22): 184 –193 surface temperature and burn behaviors of grinding rail[J].
(in Chinese) [樊文刚, 刘月明, 李建勇, 等. 高速铁路钢轨打磨技术 Tribology International, 2018, 122: 151–162. doi: 10.1016/j.triboint.
的发展现状与展望[J]. 机械工程学报, 2018, 54(22): 184–193]. doi: 2018.02.017.