Page 111 - 《摩擦学学报》2020年第3期

第 3 期 王衍, 等: 干气密封旋转流场的宏观特性与介观速度场的逻辑关系研究 377

[37] Peng Xudong, Jiang Jinbo, Bai Shaoxian, et al. Structural parameter j.triboint.2005.10.005.
optimization of spiral groove dry gas seal under low or medium [43] Ye Yanxi. Vibration characteristics of aerostatic bearing in ultra-
pressure[J]. CIESC Journal, 2014, 65(11): 4536–4542 (in Chinese) precision motion stage[D]. Wuhan: Huazhong University of Science
[彭旭东, 江锦波, 白少先, 等. 中低压干气密封螺旋槽结构参数优 and Technology, 2010(in Chinese) [叶燚玺. 超精密运动平台中气
化 [J]. 化 工 学 报 , 2014, 65(11): 4536 –4542]. doi: 浮支承振动特性的研究[D]. 武汉: 华中科技大学, 2010].
10.3969/j.issn.0438-1157.2014.11.046. [44] Jiang Xiaowen. Numerical simulation and optimum groove
[38] Yin Xiaoni, Peng Xudong. Selection of a shape function in finite
geometric parameters for spiral groove dry gas seal[D]. Nanjing:
element analysis for a spiral groove dry gas seal[J]. Lubrication
Nanjing University of Technology, 2004(in Chinese) [蒋小文. 螺旋
Engineering, 2006, 175(3): 13–14 (in Chinese) [尹晓妮, 彭旭东. 干
槽干气密封数值模拟及其槽形参数优化[D]. 南京: 南京工业大
式气体端面密封性能的有限元分析中形函数的选择[J]. 润滑与密
学, 2004].
封 , 2006, 175(3): 13 –14]. doi: 10.3969/j.issn.0254-0150.2006.
[45] Xu Jing. A research on the technology of spiral groove dry gas seal
03.005.
of pump[D]. Nanjing: Nanjing Forestry University, 2012(in
[39] Aoyamae T, Kakinuma Y, Kobayashi Y. Numerical and
Chinese) [徐静. 泵用螺旋槽干气密封技术研究[D]. 南京: 南京林
experimental analysis for the small vibration of aerostatic
业大学, 2012].
guideways[J]. CIRP Annals-Manufacuring Technology, 2006, 55(1):
[46] Jinag Xiaowen, Gu Boqin. Characteristics of gas film between end
419–422. doi: 10.1016/S0007-8506(07)60449-1.
faces of spiral groove dry gas seal[J]. CIESC Journal, 2005, 56(8):
[40] Yoshimura T, Hanafusa T, Kitagawa T, et al. Clarifications of the
1419–1425 (in Chinese) [蒋小文, 顾伯勤. 螺旋槽干气密封端面间
mechanism of nano-fluctuation of aerostatic thrust bearing with
气 膜 特 性 [J]. 化 工 学 报 , 2005, 56(8): 1419 –1425]. doi:
surface restriction[J]. Tribology International, 2012, 48: 29–34. doi:
10.3321/j.issn:0438-1157.2005.08.008.
10.1016/j.triboint.2011.03.030.
[41] Eleshaky M E. CFD investigation of pressure depressions in [47] Mayer E. Mechanical seal[M]. Beijing: Chemical Industry Press,
aerostatic circular thrust bearing[J]. Tribology International, 2009, 1981(in Chinese) [Mayer E. 机械密封[M]. 北京: 化学工业出版社,
42(7): 1108–1117. doi: 10.1016/j.triboint.2009.03.011. 1981].
[42] Chen X D, He X M. The effect of the recess shape on performance [48] Brunetiere N, Tournerie B, Frene J. Influence of fluid flow regime
analysis of the gas-lubricated bearing in optical lithography[J]. on performances of non-contacting liquid face seals[J]. Journal of
Tribology International, 2006, 39(11): 1336 –1341. doi: 10.1016/ Tribology, 2002, 124(3): 515–523. doi: 10.1115/1.1456453.