Page 138 - 《摩擦学学报》2021年第6期

第 6 期 马文林, 等: CoCrFeMoNiC x 中熵合金的组织及其力学和摩擦学性能 923

博, 等. AlCoCrFeNi高熵合金的高温摩擦磨损性能[J]. 摩擦学学 surface fatigue wear behaviour of Fe-Cr-C PTA overlays[J]. Wear,
报, 2017, 37(6): 776–783]. doi: 10.16078/j.tribology.2017.06.008. 2013, 301(1-2): 102–108. doi: 10.1016/j.wear.2013.01.077.
[21] Song Qianting, Xu Yingkun, Xu Jian. Dry-sliding wear behavior of [24] Korshunov L G, Chernenko N L. Structural transformations and
(TiZrNbTa) 90 Mo 10 high-entropy alloy against Al 2 O 3 [J]. Acta
tribological effects in the surface layer of austenitic chrome-nickel
Metallurgica Sinica, 2020, 56(11): 1507–1520 (in Chinese) [宋芊汀,
steel initiated by nanostructuring and oxidation[J]. Journal of
徐映坤, 徐坚. (TiZrNbTa) 90 Mo 10 高熵合金与Al 2 O 3 干摩擦条件下
Surface Investigation:X-ray, Synchrotron and Neutron Techniques,
的滑动磨损行为[J]. 金属学报, 2020, 56(11): 1507–1520]. doi: 10.
2020, 14(3): 632–638. doi: 10.1134/S1027451020030301.
11900/0412.1961.2020.00031.
[25] Li Pengde, Wu Youzhi, Zhang Aijun, et al. Microstructure, mech-
[22] Ding Ming, Huang Chuanhui. Study on wear resistance of ZGMn13
under impact and friction condition[J]. Foundry Technology, 2014, anical and tribological properties of Al 0.2 Co 1.5 CrFe 1.2 Ni 1.5 TiC 0.4
35(12): 2767–2769 (in Chinese) [丁明, 黄传辉. ZGMn13在冲击与 high entropy alloy[J]. Tribology, 2017, 37(4): 457–464 (in Chinese)
摩擦耦合作用下的磨损行为研究[J]. 铸造技术, 2014, 35(12): [李鹏德, 吴有智, 张爱军, 等. Al 0.2 Co 1.5 CrFe 1.2 Ni 1.5 TiC 0.4 高熵合金
2767–2769]. 的微观组织、力学与高温摩擦学性能[J]. 摩擦学学报, 2017, 37(4):
[23] Veinthal R, Sergejev F, Zikin A, et al. Abrasive impact wear and 457–464]. doi: 10.16078/j.tribology.2017.04.006.