Page 65 - 摩擦学学报2025年第8期

第 8 期 阮俊飞, 等: 3D打印SCF/PEI/PEEK复合材料的摩擦学性能 1163

investigated by orthogonal test method[J]. Tribology International, University, 2023 (in Chinese) [杨洋. 3D打印用碳纤维/聚醚醚酮复
2021, 153: 106562. doi: 10.1016/j.triboint.2020.106562. 合材料的制备及性能研究[D]. 长春: 吉林大学, 2023].
[11] Hu Jie. The Research in performance of peek and carbon fiber [19] Wang Peng. Research on key technology of fiber/heat-resistant resin
reinforced peek[D]. Shanghai: Donghua University, 2010 (in composite FDM additive manufacturing[D]. Jinan: Shandong
Chinese) [胡婕. PEEK及碳纤维增强PEEK的性能研究[D]. 上海: University, 2022 (in Chinese) [王鹏. 纤维/耐热树脂复合材料
东华大学, 2010]. FDM增材制造关键技术研究[D]. 济南: 山东大学, 2022.].
[12] Davim J P, Cardoso R. Effect of the reinforcement (carbon or glass [20] Dong Guangneng, Li Jian, Xie Youbai, et al. Periodical reduction of
fibres) on friction and wear behaviour of the PEEK against steel friction coefficient of polymers sliding against steel[J]. Tribology,
surface at long dry sliding[J]. Wear, 2009, 266(7-8): 795–799. doi: 2000, 20(3): 226–228 (in Chinese) [董光能, 李健, 谢友柏, 等. 聚合
10.1016/j.wear.2008.11.003. 物摩擦系数的周期性降低现象[J]. 摩擦学学报, 2000, 20(3):
[13] Diouf-Lewis A, Farahani R D, Iervolino F, et al. Design and 226–228]. doi: 10.16078/j.tribology.2000.03.018.
characterization of carbon fiber-reinforced PEEK/PEI blends for [21] Xu Jincheng, Yu Hui, Xia Long, et al. Effects of some factors on the
Fused Filament Fabrication additive manufacturing[J]. Materials tribological properties of the short carbon fiber-reinforced copper
Today Communications, 2022, 31: 103445. doi: 10.1016/j.mtcomm. composite[J]. Materials & Design, 2004, 25(6): 489–493. doi: 10.
2022.103445. 1016/j.matdes.2004.01.011.
[14] Blundell D J, Osborn B N. The morphology of poly(aryl-ether-ether- [22] Yu Ping, Wang Wei, Xu Yongkun, et al. Tribological performance
ketone)[J]. Polymer, 1983, 24(8): 953–958. doi: 10.1016/0032-3861 of attapulgite reinforced polyimide composites under dry friction
(83)90144-1. condition[J]. Tribology, 2023, 43(2): 209–219 (in Chinese) [喻萍,
[15] Liao Guangxin, Li Zhixiang, Cheng Yuchuan, et al. Properties of 王伟, 许永坤, 等. 凹凸棒石增强聚酰亚胺复合材料的干摩擦性能
oriented carbon fiber/polyamide 12 composite parts fabricated by 研 究 [J]. 摩 擦 学 学 报 , 2023, 43(2): 209–219]. doi: 10.16078/j.
fused deposition modeling[J]. Materials & Design, 2018, 139: tribology.2021253.
283–292. doi: 10.1016/j.matdes.2017.11.027. [23] Yu Ping, Li Guitao, Zhang Ligang, et al. Role of SiC submicron-
[16] Ribeiro B, Hein L R O, Costa M L, et al. Nonisothermal particles on tribofilm growth at water-lubricated interface of
crystallization kinetic study and thermal stability of multiwalled polyurethane/epoxy interpenetrating network (PU/EP IPN)
carbon nanotube reinforced poly (phenylene sulfide) composites[J]. composites and steel[J]. Tribology International, 2021, 153: 106611.
Polymer Composites, 2017, 38(3): 604–615. doi: 10.1002/pc.23619. doi: 10.1016/j.triboint.2020.106611.
[17] Pang Xianjuan, Yue Shiwei, Xie Jinmeng, et al. High temperature [24] Zhang G, Wetzel B, Jim B, et al. Impact of counterface topography
friction and wear properties of PEEK and its PEEK/CF on the formation mechanisms of nanostructured tribofilm of PEEK
composite[J]. Engineering Plastics Application, 2023, 51(8): hybrid nanocomposites[J]. Tribology International, 2015, 83:
119–126 (in Chinese) [逄显娟, 岳世伟, 谢金梦, 等. PEEK及其 156–165. doi: 10.1016/j.triboint.2014.11.015.
PEEK/CF复合材料的高温摩擦磨损性能[J]. 工程塑料应用, 2023, [25] Österle W, Dmitriev A I, Gradt T, et al. Exploring the beneficial role
51(8): 119–126]. doi: 10.3969/j.issn.1001-3539.2023.08.019. of tribofilms formed from an epoxy-based hybrid nanocomposite[J].
[18] Yang Yang. Preparation and properties of carbon fiber/polyether Tribology International, 2015, 88: 126–134. doi: 10.1016/j.triboint.
ether ketone composites for 3D printing[D]. Changchun: Jilin 2015.03.006.