Page 14 - 摩擦学学报2025年第8期

1112 摩擦学学报（中英文） 第 45 卷

University of Technology, 2021 (in Chinese) [金杰. 高速螺旋槽端 diffuser self-pumping hydrodynamic and hydrostatic mechanical
面机械密封的相变与稳定性研究[D]. 杭州: 浙江工业大学, 2021]. seal[J]. CIESC Journal, 2020, 71(5): 2202–2214 (in Chinese) [葛诚,
[10] Migout F, Brunetière N, Tournerie B. Study of the fluid film 孙见君, 苏徐辰, 等. 扩压式自泵送流体动静压型机械密封性能
vaporization in the interface of a mechanical face seal[J]. Tribology 分析[J]. 化工学报, 2020, 71(5): 2202–2214]. doi: 10.11949/0438-
International, 2015, 92: 84–95. doi: 10.1016/j.triboint.2015.05.029. 1157.20191586.
[11] Tournerie B, Brunetiere N, Danos J C. 2D numerical modelling of [21] Zhou Min, Sun Jianjun, Ma Chenbo, et al. Performance analysis of
the TEHD transient behaviour of mechanical face seals[J]. Sealing hydrodynamic mechanical seals based on self-pumping principle[J].
Technology, 2003, 2003(6): 10–13. doi: 10.1016/s1350-4789(03) CIESC Journal, 2015, 66(2): 687–694 (in Chinese) [周敏, 孙见君,
06016-1. 马晨波, 等. 自泵送流体动压型机械密封性能分析[J]. 化工学报,
[12] Brunetière N. A general model for liquid and gas lubrication, 2015, 66(2): 687–694]. doi: 10.11949/j.issn.0438-1157.20141035.
including cavitation[J]. Journal of Tribology, 2018, 140(2): 021702. [22] Wang Linna, Sun Jianjun. Performance analysis and bi-objective
doi: 10.1115/1.4037355. optimization study on diffuser self-pumping hydrodynamic
[13] Wang Tao, Huang Weifeng, Liu Ying, et al. A homogeneous phase mechanical seal[J]. Tribology, 2024, 44(7): 947–959 (in Chinese)
change model for two-phase mechanical seals with three- [王琳娜, 孙见君. 扩压式自泵送流体动压机械密封性能分析及双
dimensional face structures[J]. Journal of Tribology, 2014, 136(4): 目标优化研究[J]. 摩擦学学报(中英文), 2024, 44(7): 947–959].
041708. doi: 10.1115/1.4028043. doi: 10.16078/j.tribology.2023079.
[14] Gao Wenbin, Huang Weifeng, Wang Tao, et al. Numerical model of [23] Wang Jianlei, Men Chuanhao, Zhao Weigang, et al. Research on
two-phase mechanical face seal with shallow grooves based on finite structural design and end face slot of optimization of hydrodynamic
volume method[J]. Industrial Lubrication and Tribology, 2020, and hydrostatic mechanical seal[J]. Journal of Mechanical
72(10): 1303–1309. doi: 10.1108/ilt-12-2019-0537. Engineering, 2021, 57(9): 108–117 (in Chinese) [王建磊, 门川皓,
[15] Yang Jie, Suo Shuangfu, Wang Zhihao, et al. Investigation of two- 赵伟刚, 等. 动静压机械密封的结构设计及端面槽型优化研究[J].
phase change flow in mechanical seal with complex solid 机械工程学报, 2021, 57(9): 108–117]. doi: 10.3901/JME.2021.09.
surfaces[J]. AIP Advances, 2019, 9(6): 065210. doi: 10.1063/1. 108.
5100656. [24] Meng Xiangkai, Xiao Yuanhang, Zhao Wenjing, et al. Numerical
[16] Rowe W B, Xu S X, Chong F S, et al. Hybrid journal bearings with analysis on performance of hydrodynamic-hydrostatic hybrid
particular reference to hole-entry configurations[J]. Tribology mechanical seals for turbopumps[J]. Journal of Aerospace Power,
International, 1982, 15(6): 339–348. doi: 10.1016/0301-679X(82) 2024, 39(8): 428–439 (in Chinese) [孟祥铠, 肖远航, 赵文静, 等. 涡
90143-8. 轮泵用动静压型机械密封性能数值分析[J]. 航空动力学报, 2024,
[17] Zhang Minjia, Ma Yi, Meng Xiangkai, et al. Research on two-phase 39(8): 428–439]. doi: 10.13224/j.cnki.jasp.20220580.
flow in the gap and sealing performance of single metal seals[J]. [25] Singhal A K, Athavale M M, Li Huiying, et al. Mathematical basis
Tribology, 2023, 43(2): 229–239 (in Chinese) [张敏佳, 马艺, 孟祥 and validation of the full cavitation model[J]. Journal of Fluids
铠, 等. 单金属密封间隙两相流动及密封性能研究[J]. 摩擦学学 Engineering, 2002, 124(3): 617–624. doi: 10.1115/1.1486223.
报, 2023, 43(2): 229–239]. doi: 10.16078/j.tribology.2021247. [26] Bakir F, Rey R, Gerber A G, et al. Numerical and experimental
[18] Zhang Guoyuan, Chen Guozhong, Zhao Weigang, et al. An investigations of the cavitating behavior of an inducer[J].
experimental test on a cryogenic high-speed hydrodynamic non- International Journal of Rotating Machinery, 2004, 10(1): 15–25.
contact mechanical seal[J]. Tribology Letters, 2017, 65(3): 80. doi: doi: 10.1155/S1023621X04000028.
10.1007/s11249-017-0865-1. [27] Brennen C E. Cavitation and bubble dynamics[M]. New York:
[19] Zhang Guoyuan, Yan Xiutian. Analysis of two phase flow in liquid Oxford University Press, 1995. doi:10.1017/CBO9781107338760.
oxygen hybrid journal bearings for rocket engine turbopumps[J]. [28] Wang Tao. Homogeneous boiling model and experimental research
Industrial Lubrication and Tribology, 2014, 66(1): 31–37. doi: 10. of two-phase mechanical seal[D]. Beijing: Tsinghua University,
1108/ilt-09-2011-0072. 2014 (in Chinese) [王涛. 两相机械密封均相沸腾模型及实验研
[20] Ge Cheng, Sun Jianjun, Su Xuchen, et al. Performance analysis on 究[D]. 北京: 清华大学, 2014].