Page 64 - 摩擦学学报2025年第5期

698 摩擦学学报（中英文） 第 45 卷

Tribology, 2012, 134(2): 1. doi: 10.1115/1.4006063. viscometry data[J]. Journal of Energy Resources Technology, 2018,
[10] Migout F, Brunetière N, Tournerie B. Study of the fluid film 140(3): 032910. doi: 10.1115/1.4038384.
vaporization in the interface of a mechanical face seal[J]. Tribology [21] Spikes H A. The half-wetted bearing. Part 1: Extended Reynolds
International, 2015, 92: 84–95. doi: 10.1016/j.triboint.2015.05.029. equation[J]. Proceedings of the Institution of Mechanical Engineers,
[11] Liu Fuyu, Li Yongfan, Yu Bo, et al. Experimental research on Part J: Journal of Engineering Tribology, 2003, 217(1): 1–14. doi:
sealing performance of liquid film seal with herringbone-grooved 10.1243/135065003321164758.
composite textures[J]. Tribology International, 2023, 178: 108005. [22] Salant R F. Numerical simulation of a mechanical seal with an
doi: 10.1016/j.triboint.2022.108005. engineered slip/no-slip face surface[C]//Proceedings of the 17th
[12] Zhou Yukun, Peng Xudong, Zhao Wenjing, et al. Heat transfer International Conference on Fluid Sealing, Cranfield, 2003: 15–28.
mechanism and optimization of circumferential texture of [23] Salant R F, Fortier A E. Numerical analysis of a slider bearing with
mechanical seal[J]. Tribology, 2020, 40(4): 538–550 (in Chinese) a heterogeneous slip/No-slip surface[J]. Tribology Transactions,
[周宇坤, 彭旭东, 赵文静, 等. 机械密封动环外周表面织构换热机 2004, 47(3): 328–334. doi: 10.1080/05698190490455348.
理及结构优化[J]. 摩擦学学报, 2020, 40(4): 538–550]. doi: 10. [24] Wu C W, Ma G J, Zhou P, et al. Low friction and high load support
16078/j.tribology.2019192. capacity of slider bearing with a mixed slip surface[J]. Journal of
[13] Xie Yuhan, Meng Xiangkai, Zhao Wenjing, et al. Thermal Tribology, 2006, 128(4): 904–907. doi: 10.1115/1.2345419.
mechanical deformation and sealing performance analysis of [25] Aurelian F, Patrick M, Mohamed H. Wall slip effects in (elasto)
upstream pumping mechanical seals under high-pressure hydrodynamic journal bearings[J]. Tribology International, 2011,
conditions[J]. CIESC Journal, 2023, 74(10): 4241–4251 (in Chinese) 44(7−8): 868–877. doi: 10.1016/j.triboint.2011.03.003.
[谢玉汉, 孟祥铠, 赵文静, 等. 高压工况上游泵送机械密封热力变 [26] Zhu Y, Granick S. Rate-dependent slip of Newtonian liquid at
形与密封性能分析[J]. 化工学报, 2023, 74(10): 4241–4251]. doi: smooth surfaces[J]. Physical Review Letters, 2001, 87(9): 096105.
10.11949/0438-1157.20230880. doi: 10.1103/PhysRevLett.87.096105.
[14] Chen Huilong, Han Ting, Li Xinwen, et al. Analysis of internal [27] Lee C, Kim C J. Maximizing the giant liquid slip on
friction and viscosity-temperature effect on vaporization and superhydrophobic microstructures by nanostructuring their
properties of sealing liquid film[J]. Journal of Jiangsu University sidewalls[J]. Langmuir, 2009, 25(21): 12812–12818. doi: 10.1021/
(Natural Science Edition), 2020, 41(6): 661–669 (in Chinese) [陈汇 la901824d.
龙, 韩婷, 李新稳, 等. 密封液膜汽化及性能的内摩擦效应和黏温 [28] Wong T S, Kang S H, Tang S K Y, et al. Bioinspired self-repairing
效应分析[J]. 江苏大学学报(自然科学版), 2020, 41(6): 661–669]. slippery surfaces with pressure-stable omniphobicity[J]. Nature,
doi: 10.3969/j.issn.1671-7775.2020.06.007. 2011, 477(7365): 443–447. doi: 10.1038/nature10447.
[15] Wang Han, Su Yuliang, Wang Wendong, et al. Enhanced water flow [29] Yang Xiaolong, Zhuang Kai, Lu Yao, et al. Creation of topological
and apparent viscosity model considering wettability and shape ultraslippery surfaces for droplet motion control[J]. ACS Nano,
effects[J]. Fuel, 2019, 253: 1351–1360. doi: 10.1016/j.fuel.2019.05. 2021, 15(2): 2589–2599. doi: 10.1021/acsnano.0c07417.
098. [30] Hu Qiong, Xiao Yang, Lu Di, et al. Influence of microchannel
[16] Ahmad K, Zhao Xuezeng, Pan Yunlu. Effect of surface morphology interface shear on cavitation flow field characteristics of liquid film
on measurement and interpretation of boundary slip on seal[J]. Journal of Mechanical Engineering, 2023, 59(9): 171–185
superhydrophobic surfaces[J]. Surface and Interface Analysis, 2017, (in Chinese) [胡琼, 肖洋, 卢迪, 等. 微流道界面剪切对液膜密封空
49(7): 594–598. doi: 10.1002/sia.6197. 化流场特性的影响研究[J]. 机械工程学报, 2023, 59(9): 171–185].
[17] Yao Shuting, Wang Jiansheng, Liu Xueling, et al. The effects of doi: 10.3901/JME.2023.09.171.
surface topography and non-uniform wettability on fluid flow and [31] Wu Chengwei, Ma Guojun. On the boundary slip on fluid flow[J].
interface slip in rough nanochannel[J]. Journal of Molecular Liquids, Science in China: Series G Physics, Mechanics & Astronomy, 2005,
2020, 301: 112460. doi: 10.1016/j.molliq.2020.112460. 48(2): 178–187. doi: 10.1360/03yw0304.
[18] Zhao Y, Wong P L. Influences of boundary slip coating on [32] Brunetie`re N, Tournerie B, Fre^ne J. Influence of fluid flow regime
elastohydrodynamically lubricated contacts[J]. Tribology Letters, on performances of non-contacting liquid face seals[J]. Journal of
2022, 70(2): 54. doi: 10.1007/s11249-022-01593-4. Tribology, 2002, 124(3): 515–523. doi: 10.1115/1.1456453.
[19] Zhang Hui, Liu Yang, Dai Songjie, et al. Optimization of boundary [33] Schnerr G H, Sauer J. Physical and numerical modeling of unsteady
slip region on bearing sliders to improve tribological cavitation dynamics[C]//Proceedings of 4th International Conference
performance[J]. Tribology International, 2022, 168: 107446. doi: 10. on Multiphase Flow, New Orleans, 2001.
1016/j.triboint.2022.107446. [34] Chen Huilong, Wang Bin, Ren Kunteng, et al. Influence of
[20] Wang Gui, Du Hui, Guo Boyun. Determination of viscosity and wall cavitation thermal effect on lubrication properties of upstream
slip behavior of a polymer-gel used for leakage control from couette pumping mechanical seal[J]. CIESC Journal, 2016, 67(10):