Page 198 - 《摩擦学学报》2021年第5期

第 5 期 沈明学, 等: 轮轨界面摩擦学转变结构层特性及其研究进展 787

2013, 47: 361–372. doi: 10.1016/j.ijfatigue.2012.04.023. [30] Al-Juboori A, Zhu Hongtao, Wexler D, et al. Microstructural
[17] Messaadi M, Steenbergen M. Stratified surface layers on rails[J]. changes on railway track surfaces caused by electrical leakage
Wear, 2018, 414-415: 151–162. doi: 10.1016/j.wear.2018.07.019. between wheel and rail[J]. Tribology International, 2019, 140:
[18] Li S G, Wu J, Petrov R H, et al. “Brown etching layer”: a possible 105875. doi: 10.1016/j.triboint.2019.105875.
new insight into the crack initiation of rolling contact fatigue in rail [31] Wu Jun, Petrov R H, Naeimi M, et al. Laboratory simulation of
steels?[J]. Engineering Failure Analysis, 2016, 66: 8–18. doi: martensite formation of white etching layer in rail steel[J].
10.1016/j.engfailanal.2016.03.019. International Journal of Fatigue, 2016, 91: 11–20. doi: 10.1016/
[19] Pan Rui, Ren Ruiming, Chen Chunhuan, et al. The microstructure j.ijfatigue.2016.05.016.
analysis of white etching layer on treads of rails[J]. Engineering [32] Zhou Yan, Mo Jiliang, Cai Zhenbing, et al. Third-body and crack
Failure Analysis, 2017, 82: 39–46. doi: behavior in white etching layer induced by sliding-rolling friction[J].
10.1016/j.engfailanal.2017.06.018. Tribology International, 2019, 140: 105882. doi: 10.1016/j.triboint.
[20] Yang Shanjie, Ren Ruiming, Chen Chunhuan, et al. Microstructure 2019.105882.
analysis of deformed white etching layer on wheel flange of high [33] Hono K, Ohnuma M, Murayama M, et al. Cementite decomposition
speed train[J]. Tribology, 2016, 36(5): 622–628 (in Chinese) [杨姗 in heavily drawn pearlite steel wire[J]. Scripta Materialia, 2001,
洁, 任瑞铭, 陈春焕, 等. 动车组车轮轮缘塑性变形白层组织分析 44(6): 977–983. doi: 10.1016/S1359-6462(00)00690-4.
[J]. 摩 擦 学 学 报 , 2016, 36(5): 622–628]. doi: [34] Bernsteiner C, Müller G, Meierhofer A, et al. Development of white
10.16078/j.tribology.2016.05.013. etching layers on rails: simulations and experiments[J]. Wear, 2016,
[21] Pan Rui, Ren Ruiming, Chen Chunhuan, et al. Microstructure 366-367: 116–122. doi: 10.1016/j.wear.2016.03.028.
analysis of white layer of rail tread[C]. Chinese Heat Treatment [35] Speich G R, Szirmae A, Richards M J. Formation of austenite from
Society, Lanzhou, 2016 (in Chinese) [潘睿, 任瑞铭, 陈春焕, 等. 钢 ferrite and ferrite-carbide aggregates[J]. Transactions of the
轨踏面白层微观组织分析[C]. 中国机械工程学会热处理分会, 兰 Metallurgical Society of AIME, 1969, 245: 1063–1074.
州, 2016]. [36] Ganeev R A. Low-power laser hardening of steels[J]. Journal of
[22] Kumar A, Saxena A K, Kirchlechner C, et al. In situ study on Materials Processing Technology, 2002, 121(2-3): 414–419. doi:
fracture behaviour of white etching layers formed on rails[J]. Acta 10.1016/S0924-0136(01)01267-5.
Materialia, 2019, 180: 60–72. doi: 10.1016/j.actamat.2019.08.060. [37] Österle W, Rooch H, Pyzalla A, et al. Investigation of white etching
[23] Al-Juboori A, Zhu H, Wexler D, et al. Characterisation of white layers on rails by optical microscopy, electron microscopy, X-ray
etching layers formed on rails subjected to different traffic and synchrotron X-ray diffraction[J]. Materials Science and
conditions[J]. Wear, 2019, 436-437: 202998. doi: 10.1016/j.wear. Engineering:A, 2001, 303(1-2): 150–157. doi: 10.1016/S0921-5093
2019.202998. (00)01842-6.
[24] Pal S, Daniel W J T, Valente C H G, et al. Surface damage on new [38] Zhu H, Li H, Al-Juboori A, et al. Understanding and treatment of
AS60 rail caused by wheel slip[J]. Engineering Failure Analysis, squat defects in a railway network[J]. Wear, 2020, 442-443: 203139.
2012, 22: 152–165. doi: 10.1016/j.engfailanal.2012.01.002. doi: 10.1016/j.wear.2019.203139.
[25] Jessop C, Ahlström J, Persson C, et al. Damage evolution around [39] Takahashi J, Kawakami K, Ueda M. Atom probe tomography
white etching layer during uniaxial loading[J]. Fatigue & Fracture of analysis of the white etching layer in a rail track surface[J]. Acta
Engineering Materials & Structures, 2020, 43(1): 201–208. doi: 10. Materialia, 2010, 58(10): 3602–3612. doi: 10.1016/j.actamat.2010.
1111/ffe.13044. 02.030.
[26] Liu J P, Zhou Q Y, Zhang Y H, et al. The formation of martensite [40] Newcomb S B, Stobbs W M. A transmission electron microscopy
during the propagation of fatigue cracks in pearlitic rail steel[J]. study of the white-etching layer on a rail head[J]. Materials Science
Materials Science and Engineering:A, 2019, 747: 199–205. doi: 10. and Engineering, 1984, 66(2): 195–204. doi: 10.1016/0025-
1016/j.msea.2019.01.049. 5416(84)90180-0.
[27] Greco A, Sheng S, Keller J, et al. Material wear and fatigue in wind [41] Lojkowski W, Djahanbakhsh M, Bürkle G, et al. Nanostructure
turbine Systems[J]. Wear, 2013, 302(1-2): 1583–1591. doi: formation on the surface of railway tracks[J]. Materials Science and
10.1016/j.wear.2013.01.060. Engineering:A, 2001, 303(1-2): 197–208. doi: 10.1016/S0921-5093
[28] Kumar A, Agarwal G, Petrov R, et al. Microstructural evolution of (00)01947-X.
white and brown etching layers in pearlitic rail steels[J]. Acta [42] Lojkowski W, Millman Y, Chugunova S I, et al. The mechanical
Materialia, 2019, 171: 48–64. doi: 10.1016/j.actamat.2019.04.012. properties of the nanocrystalline layer on the surface of railway
[29] Baumann G, Fecht H J, Liebelt S. Formation of white-etching layers tracks[J]. Materials Science and Engineering:A, 2001, 303(1-2):
on rail treads[J]. Wear, 1996, 191(1-2): 133–140. doi: 10.1016/0043- 209–215. doi: 10.1016/S0921-5093(00)01948-1.
1648(95)06733-7. [43] Ding Haohao, Fu Zhikai, Guo Huoming, et al. Rolling wear and