Page 148 - 《摩擦学学报》2021年第3期
P. 148
第 41 卷 第 3 期 摩 擦 学 学 报 Vol 41 No 3
2021 年 5 月 Tribology May, 2021
DOI: 10.16078/j.tribology.2020068
轴电流作用下电机轴承润滑脂研究进展
*
夏延秋 , 冯 欣
(华北电力大学 能源动力与机械工程学院,北京 102206)
摘 要: 发电机和电动机是最普遍使用的动力设备之一,电机轴承润滑脂是保证电机稳定、高效运转的关键,电机轴
承在轴电流作用下润滑脂性能退化,会导致轴承失效. 作者在本文中介绍了电机轴承轴电流的产生和危害,同时对
电机轴承润滑脂性能和作用进行了分析, 重点介绍了如何防止和抑制轴电流对轴承的损伤,并指出电机轴承润滑
脂需要解决的问题和未来发展的趋势.
关键词: 电机; 轴电流; 润滑脂; 电腐蚀; 电介质
中图分类号: TH117 文献标志码: A 文章编号: 1004-0595(2021)03–0437–10
Research Progress in Tribology of Lubricating Grease
under Axial Current
*
XIA Yanqiu , FENG Xin
(School of Energy Power and Mechanical Engineering, North China Electric Power University, Beijing 102206, China)
Abstract: Generator and motor are one of the most commonly used power equipment. Motor bearing grease is the key to
ensure the stable and efficient operation of motor. Under the action of shaft current, the performance of motor bearing
grease deteriorates, which will lead to bearing failure. This paper introduces the generation and harm of motor bearing
shaft current, and analyzes the performance and function of motor bearing grease. This paper focuses on how to prevent
and suppress the damage of the bearing caused by the shaft current, and points out the problems that need to be solved
and the future development trend of the motor bearing grease.
Key words: motor; shaft current; lubricating grease; electric corrosion; dielectric
发电机和电动机广泛应用于航空航天、冶金化 障在整个电机轴承中约占60%以上,其中的30%又是
工、交通运输和家居生活等各个方面,电机性能的优 因润滑不良所导致. 可见轴承润滑状态的优劣,直接
劣,决定了整个系统运行的稳定性和可靠性. 评价电 关系到整个旋转设备能否正常工作. 如果不能准确有
机优劣指标包括电机启动、调速能力和功率密度等, 效地判断出电机轴承早期故障类型并及时预知轴承
针对效率和可靠性等方面的关注度越来越高,也成为 的性能退化状态和损伤情况,则会影响整个电机系统
评价电机优劣的重要指标,电机的高效率、高稳定性 的安全维护,易造成灾难性的事故.
是电机的发展方向. 电机是一种电磁装置,遵循电磁 轴承润滑脂具有降低滚动体间摩擦、减少动力消
感应定律,完成电能的转换或传递,是发电机与电动 耗、排出热量、防止轴承温升和抗疲劳的作用,同时,
机的总称(下文中电动机和发电机统称为电机). 电机 轴承润滑脂还应具有好的润滑性、抗氧化、防腐、防
轴承是电机设备组成中发生故障机率最高的部分,故 锈、减振和降噪等作用. 因此正确选择电机轴承脂是
Received 22 April 2020, revised 10 June 2020, accepted 24 June 2020, available online 28 May 2021.
*Corresponding author. E-mail: xiayq@ncepu.edu.cn, Tel: +86-10-61772251.
This project was supported by the Natural Science Foundation of Beijing Municipality (2172053).
北京市自然科学基金项目(2172053)资助.