Page 134 - 《摩擦学学报》2021年第2期

第 2 期 尹兆明, 等: 基于热弹流润滑的双渐开线齿轮温度场研究 279

性分析[D]. 重庆: 重庆大学, 2001]. 强度, 2017, 39(1): 198–203]. doi: 10.16579/j.issn.1001.9669.2017.
[12] Long Hui, Zhang Guanghui, Luo Wenjun. Modelling and analysis of 01.034.
transient contact stress and temperature of involute gears[J]. Chinese [21] Fan Zhimin. Study on the optimization of tooth profile parameters
Journal of Mechanical Engineering, 2004, 40(8): 24–29 (in Chinese) and strength performance test of double involute gear[D].
[龙慧, 张光辉, 罗文军. 旋转齿轮瞬时接触应力和温度的分析模 Chongqing: Chongqing University, 1998(in Chinese) [樊智敏. 双渐
拟[J]. 机械工程学报, 2004, 40(8): 24–29]. doi: 10.3321/j.issn:0577- 开线齿轮齿廓参数优化及强度性能试验的研究[D]. 重庆: 重庆大
6686.2004.08.005. 学, 1998].].
[13] Wang Chunhua, Han Chong, An Da. Analysis of relevant influence [22] Fan Zhimin, Zhang Guanghui. Analysis on meshing chamcters of
factor of the high-speed meshing gear body temperature[J]. Journal double involute gear with ladder shape teeth[J]. Chinese Journal of
of Mechanical Transmission, 2017, 41(11): 33–38+91 (in Chinese) Mechanical Engineering, 2002, 38(9): 73–76 (in Chinese) [樊智敏,
[王春华, 韩冲, 安达. 高速啮合齿轮本体温度的相关影响因素分 张光辉. 分阶式双渐开线齿轮啮合特性分析[J]. 机械工程学报,
析[J]. 机械传动, 2017, 41(11): 33–38+91]. doi: 10.16578/j.issn.1004. 2002, 38(9): 73–76]. doi: 10.3321/j.issn:0577-6686.2002.09.016.
2539.2017.11.007. [23] Yin Zhaoming, Fan Zhimin, Wang Mingkai. Thermal
[14] Gan Lai, Pu Wei, Xiao Ke, et al. Analysis of spiral bevel gears elastohydrodynamic lubrication characteristics of double involute
scuffing load capacity in mixed EHL regime[J]. Tribology, 2019, gears at the graded position of tooth waist[J]. Tribology
39(4): 426–433 (in Chinese) [甘来, 蒲伟, 肖科, 等. 混合润滑下螺 International, 2020, 144: 106028. doi: 10.1016/j.triboint.2019.
旋锥齿轮抗胶合能力分析[J]. 摩擦学学报, 2019, 39(4): 426–433]. 106028.
doi: 10.16078/j.tribology.2018162. [24] Wang Zhongda, Liu Bangcai, Yan Yechu, et al. Review of thermal
[15] Gan Lai, Xiao Ke, Wang Jiaxu, et al. A numerical method to analysis of gear transmission[J]. Journal of Mechanical
investigate the temperature behavior of spiral bevel gears under Transmission, 2014, 38(6): 159–162+170 (in Chinese) [王忠达, 刘
mixed lubrication condition[J]. Applied Thermal Engineering, 2019, 邦才, 闫业矗, 等. 齿轮传动热分析综述[J]. 机械传动, 2014, 38(6):
147: 866–875. doi: 10.1016/j.applthermaleng.2018.10.125. 159–162+170]. doi: 10.16578/j.issn.1004.2539.2014.06.029.
[16] Wang Yanzhong, Tang Wen, Chen Yanyan, et al. Investigation into [25] Xue Jianhua. The research on thermal behavior and the modification
the meshing friction heat generation and transient thermal design of high-speed and heavy-power gear system[D]. Beijing:
characteristics of spiral bevel gears[J]. Applied Thermal University of Science and Technology Beijing, 2015 (in Chinese)
Engineering, 2017, 119: 245–253. doi: 10.1016/j.applthermaleng. [薛建华. 高速重载齿轮系统热行为分析及修形设计[D]. 北京: 北
2017.03.071. 京科技大学, 2015].
[17] Li Wei, Zhai Pengfei, Tian Jingyun, et al. Thermal analysis of [26] Wang Youqiang, Yang Peiran, Tong Jingwei, et al. Transient
helical gear transmission system considering machining and thermoelastohy-drodynamic lubrication analysis of an involute spur
installation error[J]. International Journal of Mechanical Sciences, gear[J]. Chinese Journal of Mechanical Engineering, 2004, 40(9):
2018, 149: 1–17. doi: 10.1016/j.ijmecsci.2018.09.036. 10–15 (in Chinese) [王优强, 杨沛然, 佟景伟, 等. 渐开线直齿圆柱
[18] Pu Wei, Wang Jiaxu, Zhu Dong. Friction and flash temperature 齿轮非稳态热弹流润滑分析[J]. 机械工程学报, 2004, 40(9):
prediction of mixed lubrication in elliptical contacts with arbitrary 10–15]. doi: 10.3321/j.issn:0577-6686.2004.09.003.
velocity vector[J]. Tribology International, 2016, 99: 38–46. doi: [27] Yao Yangdi. Modification research of high-speed and heavy-load
10.1016/j.triboint.2016.03.017. gear based on thermo-elastic deformation[D]. Chongqing:
[19] Wang Ruixue. Vibration analysis of double involute gear based on Chongqing University, 2010 (in Chinese) [姚阳迪. 基于热弹变形
the rmosetting coupling[D]. Qingdao, China: Qingdao University of 的高速重载齿轮修形研究[D]. 重庆: 重庆大学, 2010].
Science & Technology, 2016 (in Chinese) [王瑞雪. 基于热固耦合 [28] Luo Biao. Investigation of thermo-elastic coupling dynamics and
的双渐开线齿轮振动分析[D]. 青岛: 青岛科技大学, 2016]. multi-objective comprehensive tooth profile modification of gear
[20] Fan Zhimin, Wang Ruixue, Zhou Wanfeng. Simulation analysis of a transmission system[D]. Beijing: University of Science and
steady temperature field of double involute gear drive[J]. Journal of Technology Beijing, 2019 (in Chinese) [罗彪. 齿轮传动系统热弹
Mechanical Strength, 2017, 39(1): 198–203 (in Chinese) [樊智敏, 耦合动力学及轮齿多目标综合修形研究[D]. 北京: 北京科技大
王瑞雪, 周万峰. 双渐开线齿轮传动稳态温度场模拟分析[J]. 机械 学, 2019].