Page 30 - 《摩擦学学报》2020年第5期

第 5 期 蒋文娟, 等: U71Mn钢轨气压焊焊接接头滚动磨损与损伤性能研究 585

筑, 2012(11): 119–123]. doi: 10.3969/j.issn.1003-1995.2012.11.38. joint[J]. Engineering Failure Analysis, 2019, 101: 72–85. doi:
[ 8 ] J F Peng, X H Xie, W J Song, et al. Wear properties of two 10.1016/j.engfailanal.2019.03.012.
U71MnK and U71MnG rail steel welds during rolling contact [15] R Baptista, T Santos, J Marques, et al. Fatigue behavior and
fatigue[J]. International Journal of Modern Physics B, 2019, 33(1): microstructural characterization of a high strength steel for welded
1940041-1–10. railway rails[J]. International Journal of Fatigue, 2018, 117: 1–8.
[ 9 ] Xie Xuehui, Yu Qingyuan, Li Wei, Peng Jinfang, Zhu Minghao. doi: 10.1016/j.ijfatigue.2018.07.032.
Wear property of U71MnK rail weld under rolling contact[J]. [16] Wang Wenjian, Guo Jun, Liu Qiyue. Effect of contact stress on
Tribology, 2015, 35(3): 315–321 (in Chinese) [谢旭辉, 于卿源, 李 rolling friction and wear behavior of wheel-rail materials[J].
炜, 彭金方, 朱旻昊. U71MnK 钢轨焊缝滚动接触磨损性能研究 Tribology, 2011, 31(4): 352–356 (in Chinese) [王文健, 郭俊, 刘启
[J]. 摩擦学学报, 2015, 35(3): 315–321]. 跃. 接触应力对轮轨材料滚动摩擦磨损性能影响[J]. 摩擦学学报,
[10] Wang Yingying. Research on formation mechanism of flat spots and 2011, 31(4): 352–356].
micro-crack defects in rail welded joints [D]. China Academy of [17] Li Jinhua, Li Li, Ding Wei, et al. Damage analysis of gas pressure
Railway Sciences, 2018 (in Chinese) [王莹莹. 钢轨闪光焊接头灰 welding rail joints of heavy haul railway and its prevention
斑和微裂纹缺陷形成机理研究[D]. 北京: 中国铁道科学研究院, countermeasures[J]. Railway Engineering, 2016, (11): 124–128
2018]. (in Chinese) [李金华, 李力, 丁韦, 等. 重载线钢轨气压焊接头伤损
[11] L B Godefroid, G L Faria, L C Cândido, et al. Failure analysis of 分析与预防对策[J]. 铁道建筑, 2016, (11): 124–128]. doi: 10.3969/
recurrent cases of fatigue fracture in flash butt welded rails[J]. j.issn.1003-1995.2016.11.33.
Engineering Failure Analysis, 2015, 58: 407–416. [18] He Shaoping, Wang Dezhi, Chen Shiliang. Microstructure fracture
[12] X M Yu, L C Feng, S J Qin, et al. Fracture analysis of U71Mn rail of rail joint after gas pressure welding[J]. Heat Treatment of Metals,
flash-butt welding joint[J]. Case Studies in Engineering Failure 2003, 28(1): 77–79 (in Chinese) [何少平, 王德志, 陈仕良. 钢轨气
Analysis, 2015, 4: 20–25. doi: 10.1016/j.csefa.2015.05.001. 压焊接头断裂的组织研究[J]. 金属热处理, 2003, 28(1): 77–79].
[13] Jiang Yuan. Study on the electroslag welding process and joint doi: 10.3969/j.issn.0254-6051.2003.01.027.
performance of U71Mn rail [D]. Huazhong University of Science [19] Chen Shuiyou, Liu Jihua, Guo Jun, et al. Effect of wheel material
&Technology, 2019 (in Chinese) [江园. U71Mn 钢轨电渣焊焊接 characteristics on wear and fatigue property of wheel-rail[J].
工艺与接头性能研究[D]. 武汉: 华中科技大学, 2019]. Tribology, 2015, 34(5): 531–537 (in Chinese) [陈水友, 刘吉华, 郭
[14] H C Shi, L B Shi, H H Ding, et al. Influence of laser strengthening 俊, 等. 车轮材料特性对轮轨磨损与疲劳性能的影响的研究[J]. 摩
techniques on anti-wear and anti-fatigue properties of rail welding 擦学学报, 2015, 34(5): 531–537].