Page 129 - 《爆炸与冲击》2026年第11期

第 46 卷 王一鸣，等： 电流互感器泄压装置在燃爆载荷下的动态响应与失效机理 第 11 期

[10] 汤德宝, 季虎, 马泰. 高压 CT 金属膨胀器在线监测装置的应用与性能分析 [J]. 中国设备工程, 2024(21): 177–179. DOI:
10.3969/j.issn.1671-0711.2024.21.075.
TANG D B, JI H, MA T. Application and performance analysis of on-line monitoring device for metal expander of high
voltage CT [J]. China Plant Engineering, 2024(21): 177–179. DOI: 10.3969/j.issn.1671-0711.2024.21.075.
[11] SUN S D, CHEN P, ZHAI X, et al. Numerical study on the influence mechanism of different types of burst disc on high
pressure hydrogen spontaneous combustion in tube [J]. Journal of Energy Storage, 2023, 67: 107626. DOI: 10.1016/j.est.
2023.107626.
[12] 汪可, 郑东阳, 王健一, 等. 变压器油过热故障产气特性及机理研究综述 [J]. 中国电机工程学报, 2025, 45(21): 8605–8621.
DOI: 10.13334/j.0258-8013.pcsee.242361.
WANG K, ZHENG D Y, WANG J Y, et al. Overview of gas generation mechanism of transformer oil under local overheating
faults [J]. Proceedings of the CSEE, 2025, 45(21): 8605–8621. DOI: 10.13334/j.0258-8013.pcsee.242361.
[13] NGUYEN N, HOSSEINI A. Direct calculation of Johnson-Cook constitutive material parameters for oblique cutting
operations [J]. Journal of Manufacturing Processes, 2023, 92: 226–237. DOI: 10.1016/j.jmapro.2023.02.032.
[14] CHOI H, YOON J W. A strain rate-dependent distortional hardening model for nonlinear strain paths [J]. International Journal
of Plasticity, 2025, 184: 104197. DOI: 10.1016/j.ijplas.2024.104197.
[15] YU Y L, GUO Y B, GAO G F, et al. Influence of stress triaxiality and strain-rate on fracture –a combined experiment-
simulation approach employing 316L stainless steel [J]. International Journal of Impact Engineering, 2026, 208: 105537. DOI:
10.1016/j.ijimpeng.2025.105537.
[16] ZHANG P, ZSÉLY I G, PAPP M, et al. Comparison of methane combustion mechanisms using laminar burning velocity
measurements [J]. Combustion and Flame, 2022, 238: 111867. DOI: 10.1016/j.combustflame.2021.111867.
[17] VARMA A R, AHMED U, KLEIN M, et al. Effects of turbulent length scale on the bending effect of turbulent burning
velocity in premixed turbulent combustion [J]. Combustion and Flame, 2021, 233: 111569. DOI: 10.1016/j.combustflame.
2021.111569.
[18] KIM W, SATO Y, JOHZAKI T, et al. Experimental study on self-acceleration in expanding spherical hydrogen-air flames [J].
International Journal of Hydrogen Energy, 2018, 43(27): 12556–12564. DOI: 10.1016/j.ijhydene.2018.04.153.
[19] 贾天耀, 董洋硕, 陈超, 等. 临界流动状态下甲烷气体泄漏扩散特性 [J]. 化学工业与工程, 2025, 42(5): 92–98. DOI:
10.13353/j.issn.1004.9533.20240129.
JIA T Y, DONG Y S, CHEN C, et al. Characteristics of leakage and dispersion of methane in critical flow [J]. Chemical
Industry and Engineering, 2025, 42(5): 92–98. DOI: 10.13353/j.issn.1004.9533.20240129.
[20] QIU T, SONG X, LEI Y, et al. Effect of back pressure on nozzle inner flow in fuel injector [J]. Fuel, 2016, 173: 79–89. DOI:
10.1016/j.fuel.2016.01.044.
[21] JIA W L, BAN J Q, LIANG F J, et al. A new homogeneous non-equilibrium model to compute vapor-liquid two-phase critical
pressure ratios of multicomponent hydrocarbon mixtures [J]. Journal of Loss Prevention in the Process Industries, 2020, 68:
104338. DOI: 10.1016/j.jlp.2020.104338.
[22] JIN K Y, CAI X D, HONG R, et al. Numerical investigation on flow choking induced by local heat release and large-scale
flow separation in a supersonic combustor [J]. Combustion and Flame, 2024, 268: 113627. DOI: 10.1016/j.combustflame.
2024.113627.
[23] LIVIERI P. Stress intensity factors from stress analysis of an equivalent hole [J]. Theoretical and Applied Fracture Mechanics,
2016, 84: 119–128. DOI: 10.1016/j.tafmec.2016.04.001.
[24] LI D T, YANG W, JIANG J S, et al. Investigation into dynamic fracture toughness of rigid insulation tile materials ranging
from 78 K to 1 423 K [J]. International Journal of Impact Engineering, 2025, 206: 105451. DOI: 10.1016/j.ijimpeng.2025.
105451.
(责任编辑 曾月蓉)

113901-15