Page 14 - 《爆炸与冲击》2026年第10期

第 46 卷 李 强，等： 含缺陷装药高过载安定性的表征和评估 第 10 期

LIU W, ZHANG R, SHEN R Q, et al. Response characteristics of explosive charge in initiator under high-g loading [J]. Acta
Armamentarii, 2016, 37(S2): 191–196.
[4] 高昌印. 过载性能试验台设计及微型涡喷抗过载性能研究 [D]. 南京: 南京理工大学, 2016.
GAO C Y. Design of overload performance test bench and study on anti-overload performance of micro-turbine [D]. Nanjing:
Nanjing University of Science & Technology, 2016.
[5] AYDEMIR E, ULAS A, SERIN N. Thermal decomposition and ignition of PBXN-110 plastic-bonded explosive [J].
Propellants, Explosives, Pyrotechnics, 2012, 37(3): 308–315. DOI: 10.1002/prep.201100011.
[6] JI W S, ZOU Q, YIN X Y, et al. Shock-induced energy release reaction characteristics of Nb 17 Zr 33 Ti 17 W 33 high entropy alloy
[J]. Journal of Alloys and Compounds, 2024, 984: 173881. DOI: 10.1016/j.jallcom.2024.173881.
[7] YANG K, DUAN H Z, WU Y Q, et al. Impact-induced deformation and ignition related to localized viscous shear flow
heating for high-ductility composite energetic materials [J]. Materials & Design, 2022, 223: 111185. DOI: 10.1016/j.matdes.
2022.111185.
[8] 李创新, 沈瑞琪, 刘卫, 等. 高加速度冲击过载下桥丝式电雷管的损伤特性研究 [J]. 火工品, 2012(3): 1–4.
LI C X, SHEN R Q, LIU W, et al. Research on damage characteristics of bridgewire electric detonator under high acceleration
loading [J]. Initiators & Pyrotechnics, 2012(3): 1–4.
[9] 王艳华. 火工品过载试验研究及数值模拟仿真 [D]. 太原: 中北大学, 2010: 20–31. DOI: 10.7666/d.D315111.
WANG Y H. The study of the initiator overloading on experiment and the numerical simulation analyses [D]. Taiyuan: North
University of China, 2010: 20–31. DOI: 10.7666/d.D315111.
[10] 邓琼, 李玉龙, 索涛, 等. 火工品高过载动态力学性能测试方法研究 [J]. 火工品, 2007(1): 28–31. DOI: 10.3969/j.issn.1003-
1480.2007.01.009.
DENG Q, LI Y L, SUO T, et al. Test method on dynamic mechanical behavior of initiating explosive device under high
acceleration [J]. Initiators & Pyrotechnics, 2007(1): 28–31. DOI: 10.3969/j.issn.1003-1480.2007.01.009.
[11] 许志峰, 屈可朋. 装药发射安全性模拟加载实验方法研究 [J]. 火工品, 2015(6): 51–53. DOI: 10.3969/j.issn.1003-1480.
2015.06.014.
XU Z F, QU K P. Study on experimental method of simulation loading for launch safety of charge [J]. Initiators &
Pyrotechnics, 2015(6): 51–53. DOI: 10.3969/j.issn.1003-1480.2015.06.014.
[12] ZHANG H N, LIU M, MIAO Y G, et al. Dynamic mechanical response and damage mechanism of HTPB propellant under
impact loading [J]. Materials, 2020, 13(13): 3031. DOI: 10.3390/ma13133031.
[13] 徐鹏, 祖静, 范锦彪. 高 g 值加速度冲击试验技术研究 [J]. 振动与冲击, 2011, 30(4): 241–243. DOI: 10.13465/j.
cnki.jvs.2011.04.009.
XU P, ZU J, FAN J B. Acceleraton shock test technology with higher values of G [J]. Journal of Vibration and Shock, 2011,
30(4): 241–243. DOI: 10.13465/j.cnki.jvs.2011.04.009.
[14] 门士滢. 高过载宽脉冲空气击锤设计及试验技术研究 [D]. 南京: 南京理工大学, 2014: 14–21. DOI: 10.7666/d.Y2520469.
[15] 何小斌. 火工品过载特性落球碰撞模拟试验研究 [D]. 南京: 南京理工大学, 2010: 11–16. DOI: 10.7666/d.Y1697799.
HE X B. Research on overload characteristics of initiating device by falling ball collision simulation tests [D]. Nanjing:
Nanjing University of Science & Technology, 2010: 11–16. DOI: 10.7666/d.Y1697799.
[16] 满晓飞, 门士滢, 马少杰, 等. 空气击锤装置模拟硬目标侵彻实验方法 [J]. 探测与控制学报, 2016, 38(3): 90–93.
MAN X F, MEN S Y, MA S J, et al. Using air hammer device simulate hard target penetration process [J]. Journal of
Detection & Control, 2016, 38(3): 90–93.
[17] 陈健. 空气炮力学过载模拟试验波形展宽研究 [D]. 南京: 南京理工大学, 2018: 11–20.
CHEN J. Research on waveform-broadening of mechanical overload simulation test on air gun [D]. Nanjing: Nanjing
University of Science & Technology, 2018: 11–20.
[18] HANG Y, SHANG F, GAO S, et al. A miniature and low-power-consumption stress measurement system for embedded
explosive in multilayer target penetration [J]. Shock and Vibration, 2020, 2020(1): 5294607. DOI: 10.1155/2020/5294607.
[19] BAKER W A, UNTAROIU C D, CRAWFORD D M, et al. Mechanical characterization and finite element implementation of
the soft materials used in a novel anthropometric test device for simulating underbody blast loading [J]. Journal of the

101001-11