Page 84 - 《爆炸与冲击》2026年第4期

第 46 卷 李千一，等： 新型TWIP钢/陶瓷复合结构的抗冲击性能 第 4 期

dynamic loading conditions [D]. Chengdu: Southwest Jiaotong University, 2018: 34–37.
[7] VISSER W, GHONEM H. Twin nucleation in cold rolled low carbon steel subjected to plate impacts [J]. Materials Science
and Engineering: A, 2017, 687: 28–38. DOI: 10.1016/j.msea.2016.12.086.
[8] TANG W Q, ZHANG K, CHEN T Y, et al. Microstructural evolution and energetic characteristics of TiZrHfTa0.7W0.3 high-
entropy alloy under high strain rates and its application in high-velocity penetration [J]. Journal of Materials Science &
Technology, 2023, 132: 144–153. DOI: 10.1016/j.jmst.2022.05.043.
[9] FENG X C, LIU X Y, BAI S X, et al. Investigation of dynamic tensile mechanical responses and deformation mechanism at
high strain rates in a TWIP steel [J]. Journal of Materials Research and Technology, 2023, 26: 639–653. DOI: 10.1016/J.
JMRT.2023.07.241.
[10] WHELCHEL R L, SANDERS T H JR, THADHANI N N. Spall and dynamic yield behavior of an annealed aluminum-
magnesium alloy [J]. Scripta Materialia, 2014, 92: 59–62. DOI: 10.1016/j.scriptamat.2014.08.014.
[11] 陈荣, 马荣, 王峥, 等. 铸态 TiZrNbV 难熔高熵合金的层裂行为 [J]. 含能材料, 2024, 32(4): 387–396. DOI: 10.11943/
CJEM2023133.
CHEN R, MA R, WANG Z, et al. Spalling behavior of as-cast TiZrNbV refractory high entropy alloy [J]. Chinese Journal of
Energetic Materials, 2024, 32(4): 387–396. DOI: 10.11943/CJEM2023133.
[12] 初建鹏, 冯建程, 鞠翔宇, 等. 动载作用下高强度钢的层裂特性研究 [J]. 兵器材料科学与工程, 2024, 47(2): 129–135. DOI:
10.14024/j.cnki.1004-244x.20240221.002.
CHU J P, FENG J C, JU X Y, et al. Study on spalling characteristics of high strength steel under dynamic load [J]. Ordnance
Material Science and Engineering, 2024, 47(2): 129–135. DOI: 10.14024/j.cnki.1004-244x.20240221.002.
[13] STRAND O T, GOOSMAN D R, MARTINEZ C, et al. Compact system for high-speed velocimetry using heterodyne
techniques [J]. Review of Scientific Instruments, 2006, 77(8): 083108. DOI: 10.1063/1.2336749.
[14] 张凤国, 王裴, 王昆, 等. 关于延性金属材料层裂强度概念的解读 [J]. 防护工程, 2020, 42(5): 33–36. DOI: 10.3969/j.issn.
1674-1854.2020.05.005.
ZHANG F G, WANG P, WANG K, et al. Interpretation of the concept of spalling strength of ductile metal materials [J].
Protective Engineering, 2020, 42(5): 33–36. DOI: 10.3969/j.issn.1674-1854.2020.05.005.
[15] 罗国强, 黄志宏, 张睿智, 等. Cu/PMMA 复合材料的声速与冲击响应行为 [J]. 高压物理学报, 2021, 35(1): 011301. DOI:
10.11858/gywlxb.20200599.
LUO G Q, HUANG Z H, ZHANG R Z, et al. Sound velocity and shock response behavior of Cu/PMMA composites [J].
Chinese Journal of High Pressure Physics, 2021, 35(1): 011301. DOI: 10.11858/gywlxb.20200599.
[16] AMERI A, WANG H X, LI Z J, et al. Spall strength dependence on peak stress and deformation history in lean duplex
stainless steel 2101 [J]. Materials Science and Engineering: A, 2022, 831: 142158. DOI: 10.1016/j.msea.2021.142158.
[17] LI L X, LIU X Y, XU J, et al. Shock compression and spall damage of dendritic high-entropy alloy CoCrFeNiCu [J]. Journal
of Alloys and Compounds, 2023, 947: 169650. DOI: 10.1016/j.jallcom.2023.169650.
[18] DAI Z H, LU L, CHAI H W, et al. Mechanical properties and fracture behavior of Mg-3Al-1Zn alloy under high strain rate
loading [J]. Materials Science and Engineering: A, 2020, 789: 139690. DOI: 10.1016/j.msea.2020.139690.
[19] 郭伟国. 动态本构关系简介 [J]. 爆炸与冲击, 2022, 42(9): 091400. DOI: 10.11883/bzycj-2022-0411.
GUO W G. An introduction to dynamic consititutive relation ship [J]. Explosion and Shock Waves, 2022, 42(9): 091400. DOI:
10.11883/bzycj-2022-0411.
[20] 郭子涛, 高斌, 郭钊, 等. 基于 J-C 模型的 Q235 钢的动态本构关系 [J]. 爆炸与冲击, 2018, 38(4): 804–810. DOI: 10.11883/
bzycj-2016-0333.
GUO Z T, GAO B, GUO Z, et al. Dynamic constitutive relation based on J-C model of Q235 steel [J]. Explosion and Shock
Waves, 2018, 38(4): 804–810. DOI: 10.11883/bzycj-2016-0333.
[21] LI Z G, LI R, JI C, et al. Development of a modified Gurson-Tvergaard-Needleman damage model characterizing the strain-
rate-dependent behavior of 6061-T5 aluminum alloy [J]. Journal of Materials Engineering and Performance, 2022, 31(9):
7662–7672. DOI: 10.1007/s11665-022-06789-2.
[22] CZARNOTA C, JACQUES N, MERCIER S, et al. Modelling of dynamic ductile fracture and application to the simulation of
plate impact tests on tantalum [J]. Journal of the Mechanics and Physics of Solids, 2008, 56(4): 1624–1650. DOI: 10.1016/j.
jmps.2007.07.017.
(责任编辑 王小飞)

043101-11