Page 217 - 《摩擦学学报》2021年第6期
P. 217

1002                                    摩   擦   学   学   报                                 第 41 卷

                   表 4    不同润滑条件下上摩擦副所受升力                          Biomimetics,  2013,  8(4):  046001.  doi:  10.1088/1748-3182/8/4/
                Table 4    Lift force of the upper friction pair under  046001.
                       different lubrication conditions        [11]  Wang  Jiugen,  Chen  Shihong.  Bionic  design  of  Koch  snowflake

                             Lift force of the upper friction pair/(N/m)  surface texture and its effects on air frictional noise of high speed
             Surface condition
                          Dry friction  IL-Im lubrication  IL-P lubrication  train[J].  Journal  of  Mechanical  Engineering,  2014,  50(7):  78–83
                                           −3          −2
               Untextured    0        7.20×10     7.45×10          (in Chinese) [汪久根, 陈仕洪. Koch雪花表面织构设计与高铁空
              600 μm texture  0        0.20        2.03
                                                                   气摩擦噪声分析[J]. 机械工程学报, 2014, 50(7): 78–83]. doi: 10.
              800 μm texture  0        0.27        2.71
                                                                   3901/JME.2014.07.078.
             1 000 μm texture  0       0.39        3.94
                                                               [12]  Mo Jiling, Wang Zhengguo, Chen Guangxiong, et al. The effect of
                                                                   groove-textured  surface  on  friction  and  wear  and  friction-induced
            坑织构直径增大导致离子液体对上摩擦副的升力增
                                                                   vibration  and  noise[J].  Wear,  2013,  301(1 –2):  671–681.  doi:  10.
            大,离子液体黏度增大也导致对上摩擦副升力增大.
                                                                   1016/j.wear.2013.01.082.
            参 考 文 献                                            [13]  Wang Dongwei, Mo Jiliang, Wang Zhengguo, et al. Mechanism of
                                                                   the  effect  of  groove-textured  surface  on  the  friction  vibration  and
            [  1  ]  Yazdi R, Ghasemi H M, Wang C, et al. Bio-corrosion behaviour of
                                                                   noise[J]. Journal of Mechanical Engineering, 2013, 49(23): 112–116
                 oxygen  diffusion  layer  on  Ti-6Al-4V  during  tribocorrosion[J].
                                                                   (in Chinese) [王东伟, 莫继良, 王正国, 等. 沟槽织构化表面影响摩
                 Corrosion Science, 2017, 128: 23–32. doi: 10.1016/j.corsci.2017.08.
                                                                   擦振动噪声机理[J]. 机械工程学报, 2013, 49(23): 112–116]. doi:
                 031.
                                                                   10.3901/JME.2013.23.112.
            [  2  ]  Abdel-Hady Gepreel M, Niinomi M. Biocompatibility of Ti-alloys
                                                               [14]  Wang Yue, Hu Hong, Shao Jinyou, et al. Fabrication of well-defined
                 for long-term implantation[J]. Journal of the Mechanical Behavior of
                                                                   mushroom-shaped  structures  for  biomimetic  dry  adhesive  by
                 Biomedical  Materials,  2013,  20:  407–415.  doi:  10.1016/j.jmbbm.
                                                                   conventional  photolithography  and  molding[J].  ACS  Applied
                 2012.11.014.
                                                                   Materials  &  Interfaces,  2014,  6(4):  2213–2218.  doi:  10.1021/
            [  3  ]  Geetha M, Singh A K, Asokamani R, et al. Ti based biomaterials,
                                                                   am4052393.
                 the ultimate choice for orthopaedic implants-A review[J]. Progress
                                                               [15]  Dai  Qingwen,  Huang  Wei,  Wang  Xiaolei.  Surface  roughness  and
                 in Materials Science, 2009, 54(3): 397–425. doi: 10.1016/j.pmatsci.
                                                                   orientation effects on the thermo-capillary migration of a droplet of
                 2008.06.004.
                                                                   paraffin oil[J]. Experimental Thermal and Fluid Science, 2014, 57:
            [  4  ]  Zhang  Yingxin,  Xu  Yong,  Zeng  Zhixiang.  Research  progress  of
                                                                   200–206. doi: 10.1016/j.expthermflusci.2014.04.023.
                 texturing  and  biological  activity  coatings  on  titanium  alloys[J].
                                                               [16]  Wang Jingqiu, Wang Xiaolei. State of the art in innovative design of
                 China Surface Engineering, 2019, 32(1): 1–11 (in Chinese) [张颖鑫,  surface texture[J]. Journal of Mechanical Engineering, 2015, 51(23):
                 徐勇, 曾志翔. 钛合金表面织构化与构建生物活性涂层的研究进                    84–95 (in Chinese) [王静秋, 王晓雷. 表面织构创新设计的研究回
                 展[J]. 中国表面工程, 2019, 32(1): 1–11]. doi: 10.11933/j.issn.1007-
                                                                   顾及展望[J]. 机械工程学报, 2015, 51(23): 84–95]. doi: 10.3901/
                 9289.20181030002.
                                                                   JME.2015.23.084.
            [  5  ]  Bhushan B. Introduction to tribology[M]. John Wiley & Sons, 2002.  [17]  Shao Tianmin, Geng Zhe. Research progress in patterned thin solid
            [  6  ]  Han  Zhiwu,  Ren  Luquan,  Liu  Zubin.  Investigation  on  anti-wear  film techniques and their tribological performance[J]. China Surface
                 ability  of  bionic  nonsmooth  surfaces  made  by  laser  texturing[J].  Engineering, 2015, 28(2): 1–26 (in Chinese) [邵天敏, 耿哲. 图形化
                 Tribology, 2004, 24(4): 289–293 (in Chinese) [韩志武, 任露泉, 刘  固体薄膜技术及其摩擦学性能的研究进展[J]. 中国表面工程,
                 祖斌. 激光织构仿生非光滑表面抗磨性能研究[J]. 摩擦学学报,                  2015, 28(2): 1–26]. doi: 10.11933/j.issn.1007-9289.2015.02.001.
                 2004, 24(4): 289–293]. doi: 10.16078/j.tribology.2004.04.001.  [18]  Hu Tianchang, Ding Qi, Hu Litian. The effect of laser texturing of
            [  7  ]  Etsion  I.  State  of  the  art  in  laser  surface  texturing[J].  Journal  of  GCr15  steel  surfaces  on  their  tribological  properties[J].  Tribology,
                 Tribology, 2005, 127(1): 248–253. doi: 10.1115/1.1828070.  2011, 31(5): 447–451 (in Chinese) [胡天昌, 丁奇, 胡丽天. 激光表
            [  8  ]  Yu Haiwu, Huang Wei, Wang Xiaolei. Dimple patterns design for  面织构化对GCr15钢摩擦磨损性能的影响[J]. 摩擦学学报, 2011,
                 different circumstances[J]. Lubrication Science, 2013, 25(2): 67–78.  31(5): 447–451]. doi: 10.16078/j.tribology.2011.05.006.
                 doi: 10.1002/ls.168.                          [19]  Mishra  S  P,  Polycarpou  A  A.  Tribological  studies  of  unpolished
            [  9  ]  Tang  Wei,  Zhou  Yuankai,  Zhu  Hua,  et  al.  The  effect  of  surface  laser surface textures under starved lubrication conditions for use in
                 texturing on reducing the friction and wear of steel under lubricated  air-conditioning  and  refrigeration  compressors[J].  Tribology
                 sliding  contact[J].  Applied  Surface  Science,  2013,  273:  199–204.  International, 2011, 44(12): 1890–1901. doi: 10.1016/j.triboint.2011.
                 doi: 10.1016/j.apsusc.2013.02.013.                08.005.
            [10]  Huang Wei, Wang Xiaolei. Biomimetic design of elastomer surface  [20]  Jiménez A E, Bermúdez M D. Ionic liquids as lubricants for steel-
                 pattern for friction control under wet conditions[J]. Bioinspiration &  aluminum  contacts  at  low  and  elevated  temperatures[J].  Tribology
   212   213   214   215   216   217   218   219   220   221   222