Page 65 - 《摩擦学学报》2020年第4期

第 4 期 任晓燕, 等: ZCuPb 20 Sn 5 合金耐磨性能研究 475

−7 3 comprehensive stress life for hydraulic pump[J]. Hydraulics
均值为0.095，磨损率高达17.070 ×10 mm /(N·m).
d.载荷小于150 N时，以轻微黏着磨损为主，主要 Pneumatics & Seals, 2005, (2): 37–38 (in Chinese) [张于贤, 王红,
廖振方. 关于液压泵综合应力寿命的探讨[J]. 液压气动与密封,
是油润滑起作用；载荷为150~250 N时，铅和油协同润
2005, (2): 37–38]. doi: 10.3969/j.issn.1008-0813.2005.02.012.
滑，以黏着磨损为主；载荷在250~350 N范围时，铅的
[ 9 ] Rohgti P K, Liu Y B, Barr T L. Tribolgical behavior and surface
润滑作用为主，主要为磨粒磨损，少量氧化磨损.
analysis of tribodefo-rmed Al alloy-50%graphite particle
参 考 文 献 composites[J]. Metallurgical Transactions, 1991, 22A: 1435–1441.
[10] Li Baoming, Xu Chenghai, Yan Yutao. Discussion on the law of
[ 1 ] Wang Yan, Wang Xiaoqing, Guo Shengrong, et al. Fatigue analysis
wear resistance of sliding bearing alloys[J]. Machinery
and life prediction method of aviation piston pump cylinder[J].
Manufacturing, 2009, 46(5): 183–189 (in Chinese) [李宝民, 徐成海,
Journal of Beijing University of Aeronautics and Astronautics, 2019,
闫玉涛. 滑动轴承合金耐磨性能规律探讨[J]. 机械制造, 2009,
45(7): 1314–1321 (in Chinese) [王岩, 王晓晴, 郭生荣, et al. 航空柱
46(5): 183–189].
塞泵缸体疲劳分析及寿命预测方法[J]. 北京航空航天大学学报,
[11] Li Jianming. Wear metals[M]. Beijing: Metallurgical Industry Press,
2019, 45(7): 1314–1321].
1990: 1-2(in Chinese) [李建明. 磨损金属学[M]. 北京: 冶金工业出
[ 2 ] Ma Jiming, Huang Yihong, Guo Jian, et al. Review of wear
版社, 1990: 1-2].
characteristics of hydraulic piston pump moving pairs[J]. Hydraulics
[12] M Eriksson, S Jacobson. Tribological surfaces of organic brake
and Pneumatics, 2017, (8): 84–94 (in Chinese) [马纪明, 黄怡鸿, 郭
pads[J]. Tribology International, 2000, 26(23): 817–827.
健, et al. 液压柱塞泵运动副磨损特性研究综述[J]. 液压与气动,
[13] B K Prasad. Sliding wear behavior of bronzes under varying
2017, (8): 84–94]. doi: 10.11832/j.issn.1000-4858.2017.08.015.
material composition, microstructure and test conditions[J]. Science
[ 3 ] Yang Zhichun, Yu Lincong. Research on flow and pressure output
and Direct, 2004, 98(257): 110–123.
characteristics of single piston pump[J]. Hydraulics and Pneumatics,
[14] Liu Yue, Chen Chao, Lv Wenling. Study on friction and wear
2019, (10): 135–140 (in Chinese) [杨志春, 郁林聪. 单柱塞泵流量
properties of centrifugally cast high lead tin bronze alloy[J]. Journal
压力输出特性研究[J]. 液压与气动, 2019, (10): 135–140].
of Northeastern University (Natural Science), 2016, (3): 338–342
[ 4 ] Zhang Li, Xiang Huiyu, Zhao Wei, et al. Analysis of friction pair of (in Chinese) [刘越, 陈超, 吕文玲. 离心铸造高ZCuPb20Sn5合金摩
swash plate type axial piston pump[J]. Machine Tool and
擦磨损性能研究[J]. 东北大学学报(自然科学版), 2016, (3):
Hydraulics, 2007, 35(6): 120–122 (in Chinese) [张力, 项辉宇, 赵罘, 338–342].
等. 斜盘式轴向柱塞泵摩擦副分析[J]. 机床与液压, 2007, 35(6): [15] J P Pandey, B K Prasad. Sliding wear response of a leaded-tin
120–122]. doi: 10.3969/j.issn.1001-3881.2007.06.041.
bronze: Influence of the counterface material characteristics[J].
[ 5 ] Sun Jiankun, Hou Zhigang, Xu Shangwu, et al. Analysis of load and Journal of Materials Engineering and Performance, 1998, 32(7):
structure of super high pressure axial piston pump drive shaft[J]. 122–129.
Hydraulic Pneumatics and Seals, 2017, 37(4): 15–18 (in Chinese) [16] M. Kestursatya, J. K. Kim Wear performance of copper-graphite
[孙建坤, 侯志刚, 徐尚武, 等. 超高压轴向柱塞泵传动轴的载荷与 composite and a leaded copper alloy[J]. Materials Science and
结构分析[J]. 液压气动与密封, 2017, 37(4): 15–18]. doi: 10.3969/j.issn. Engineering, 2003, 134(339): 150–158.
1008-0813.2017.04.005. [17] Fu Shangfa, Zhao Yuan, Tu Zhengwen, et al. Wear self-
[ 6 ] Liu Siyuan, Wang Chuang, Yang Mengxue, et al. Dynamic compensation effect of additives in mechanical oil on copper-steel
characteristics analysis of the swash plate pump sliding shoe pair friction pairs[J]. Journal of Materials Protection, 2002, (7): 6–7
severe wear process[J]. Hydraulics and Pneumatic, 2017, (1): 1–5 (in Chinese) [付尚发, 赵源, 涂政文, 等. 机械油中添加剂对铜-钢
(in Chinese) [刘思远, 王闯, 杨梦雪, 等. 斜盘泵滑靴副剧烈磨损过 摩擦副的磨损自补偿效应[J]. 材料保护, 2002, (7): 6–7]. doi: 10.3969/
程的动态特性分析[J]. 液压与气动, 2017, (1): 1–5]. doi: 10.11832/j. j.issn.1001-1560.2002.07.003.
issn.1000-4858.2017.01.001. [18] Xia Yanqiu, Liu Weimin, Xue Qunji. Study on extreme pressure
[ 7 ] Ma Jiming, Ran Lingyan, Fu Yongling, et al. Research on the status antiwear mechanism of two kinds of phosphorus and nitrogen
quo and method of accelerated life test of aviation hydraulic pump additives[J]. Journal of Tribology, 2000, 20(6): 443–446
(continued 2) typical failure mode and acceleration method of (in Chinese) [夏延秋, 刘维民, 薛群基. 两种磷氮类添加剂的极压
aviation hydraulic pump[J]. Hydraulic and Pneumatic, 2015, (7): 抗磨机理研究[J]. 摩擦学学报, 2000, 20(6): 443–446]. doi: 10.3321/
1–6 (in Chinese) [马纪明, 阮凌燕, 付永领, 等. 航空液压泵加速寿 j.issn:1004-0595.2000.06.010.
命试验现状及方法研究(连载2)航空液压泵典型失效模式及加速 [19] Mo Yunhui, Tou Dehua, Wei Xicheng, et al. Study on friction and
方法[J]. 液压与气动, 2015, (7): 1–6]. doi: 10.11832/j.issn.1000- wear properties of steel-copper friction pair self-repairing tin-based
4858.2015.07.001. Sesi-fluid grease[J]. Tribology, 2009, 29(3): 272–276 (in Chinese)
[ 8 ] Zhang Yuxian, Wang Hong, Liao Zhenfang. Approach the [莫云辉, 陶德华, 韦习成, 等. 钢-铜摩擦副自修复锡基半流体脂