Page 215 - 《爆炸与冲击》2026年第11期

第 46 卷 翟政博，等： 大载重吊落式缓冲气囊设计及多目标优化 第 11 期

2019.004306.
ZHANG P F. Study on landing attenuation characteristics and optimum design of combined airbags [D]. Harbin: Harbin
Institute of Technology, 2019. DOI: 10.27061/d.cnki.ghgdu.2019.004306.
[10] LIU X, GUO W W, HUANG L, et al. The multi-objective reliability-based design optimisation of buffering characteristics of
airbag seat in manned airdrop [J]. International Journal of Crashworthiness, 2024, 29(3): 391–401. DOI: 10.1080/13588265.
2023.2252216.
[11] 洪煌杰, 王红岩, 李建阳, 等. 基于代理模型的空投装备气囊缓冲系统多目标优化 [J]. 振动与冲击, 2015, 34(3): 215–220.
DOI: 10.13465/j.cnki.jvs.2015.03.035.
HONG H J, WANG H Y, LI J Y, et al. Multi-objective optimization of an airbag cushion system for airdropping equipment
based on surrogate model [J]. Journal of Vibration and Shock, 2015, 34(3): 215–220. DOI: 10.13465/j.cnki.jvs.2015.03.035.
[12] 鲁超宇, 陈金宝, 王宸, 等. 组合式气囊在重装空投中的缓冲性能分析 [J]. 宇航学报, 2023, 44(6): 841–850. DOI: 10.3873/
j.issn.1000-1328.2023.06.004.
LU C Y, CHEN J B, WANG C, et al. Analysis of cushioning performance of combined airbag in heavy airdrop [J]. Journal of
Astronautics, 2023, 44(6): 841–850. DOI: 10.3873/j.issn.1000-1328.2023.06.004.
[13] 付新华, 汪君, 陈勇, 等. 战车载人空投着陆缓冲过程仿真模型研究 [J]. 振动与冲击, 2021, 40(24): 57–64. DOI: 10.
13465/j.cnki.jvs.2021.24.008.
FU X H, WANG J, CHEN Y, et al. A study on soft-landing buffering process of manned armored vehicle airdrop [J]. Journal
of Vibration and Shock, 2021, 40(24): 57–64. DOI: 10.13465/j.cnki.jvs.2021.24.008.
[14] 李建阳, 王建国, 白云, 等. 自落式气囊缓冲过程数值仿真及试验验证 [C]//第三十五届中国仿真大会论文集. 合肥: 安徽
省人民政府, 中国仿真学会, 2023: 5. DOI: 10.26914/c.cnkihy.2023.077893.
[15] XU Y, YANG Y L, HUANG H, et al. Multi-objective optimization design of an origami-inspired combined cushion airbag [J].
Aerospace, 2024, 11(3): 169. DOI: 10.3390/aerospace11030169.
[16] 徐彦, 杨毅龙, 陈刚, 等. 基于折纸技术的组合型缓冲气囊设计及仿真 [J]. 航天返回与遥感, 2022, 43(5): 24–35. DOI:
10.3969/j.issn.1009-8518.2022.05.003.
XU Y, YANG Y L, CHEN G, et al. Design and simulation of a novel combined cushion airbag based on origami technology [J].
Spacecraft Recovery & Remote Sensing, 2022, 43(5): 24–35. DOI: 10.3969/j.issn.1009-8518.2022.05.003.
[17] 王一波. 小型电子设备着陆缓冲气囊的设计与优化 [D]. 南京: 南京航空航天大学, 2018.
WANG Y B. Design and optimization of landing cushion airbag for small electronic equipment [D]. Nanjing: Nanjing
University of Aeronautics and Astronautics, 2018.
[18] 李建阳, 王红岩, 芮强, 等. 空降车着陆冲击累积损伤评估方法研究 [J]. 系统仿真学报, 2014, 26(1): 208–214,220. DOI:
10.16182/j.cnki.joss.2014.01.011.
LI J Y, WANG H Y, RUI Q, et al. Research on cumulative damage assessment method for airborne vehicle at landing based
on finite element analysis [J]. Journal of System Simulation, 2014, 26(1): 208–214,220. DOI: 10.16182/j.cnki.joss.2014.
01.011.
[19] 王高才. 高空精密设备着陆气囊缓冲性能研究 [D]. 长沙: 湖南大学, 2023. DOI: 10.27135/d.cnki.ghudu.2023.001567.
WANG G C. Research on the cushioning performance of landing airbags for high-altitude precision equipment [D]. Changsha:
Hunan University, 2023. DOI: 10.27135/d.cnki.ghudu.2023.001567.
[20] 杨越. 组合式气囊缓冲动力学仿真及多工况协同优化研究 [D]. 长沙: 湖南大学, 2020. DOI: 10.27135/d.cnki.ghudu.
2020.003559.
YANG Y. Dynamic simulation of combined airbag cushion and collaborative optimization of multiple working conditions [D].
Changsha: Hunan University, 2020. DOI: 10.27135/d.cnki.ghudu.2020.003559.
(责任编辑 王小飞)

115901-13