Page 38 - 《爆炸与冲击》2026年第4期

第 46 卷 姚术健，等： 等效模拟爆炸加载试验技术研究进展 第 4 期

44(5): 052201. DOI: 10.11883/bzycj-2023-0094.
CHENG S, TONG N X, LIU W X, et al. A control method for attenuation history of shock wave generated by blast
simulation shock tube based on high pressure gas driving technic [J]. Explosion and Shock Waves, 2024, 44(5): 052201.
DOI: 10.11883/bzycj-2023-0094.
[92] BALAN G S, RAJ S A. A review on shock tubes with multitudinous applications [J]. International Journal of Impact
Engineering, 2023, 172: 104406. DOI: 10.1016/j.ijimpeng.2022.104406.
[93] ANDREOTTI R, COLOMBO M, GUARDONE A, et al. Performance of a shock tube facility for impact response of
structures [J]. International Journal of Non-Linear Mechanics, 2015, 72: 53–66. DOI: 10.1016/j.ijnonlinmec.2015.02.010.
[94] HOUAS L, BIAMINO L, MARIANI C, et al. The effects that changes in the diaphragm aperture have on the resulting shock
tube flow [J]. Shock Waves, 2012, 22(4): 287–293. DOI: 10.1007/s00193-012-0372-0.
[95] KIM I, PARK G. Experimental study of oxygen catalytic recombination on a smooth surface in a shock tube [J]. Applied
Thermal Engineering, 2019, 156: 678–691. DOI: 10.1016/j.applthermaleng.2019.04.054.
[96] KIM I, YANG Y, PARK G. Effect of titanium surface roughness on oxygen catalytic recombination in a shock tube [J]. Acta
Astronautica, 2020, 166: 260–269. DOI: 10.1016/j.actaastro.2019.10.030.
[97] HEITZER J. Dynamic interaction of a plate and an impactor [J]. Computers & Structures, 1996, 60(5): 837–848. DOI:
10.1016/0045-7949(95)00445-9.
[98] KRAUTHAMMER T. Modern protective structures [M]. Boca Raton: CRC Press, 2008: 24–103. DOI: 10.1201/
9781420015423.
[99] JONES N. Structural impact [M]. Cambridge: Cambridge University Press, 2012: 377–424. DOI: 10.1017/
CBO9780511820625.
[100] 孙桂娟, 高伟亮, 刘瑞朝, 等. 爆炸近区荷载模拟试验技术研究进展 [J]. 防护工程, 2019, 41(4): 66–73.
SUN G J, GAO W L, LIU R Z, et al. Research progress of simulation test technology of load in near-field of explosion [J].
Protective Engineering, 2019, 41(4): 66–73.
[101] XIAN W, CHEN W S, HAO H, et al. Experimental and numerical studies on square steel-reinforced concrete-filled steel
tubular (SRCFST) members subjected to lateral impact [J]. Thin-Walled Structures, 2021, 160: 107409. DOI: 10.1016/j.
tws.2020.107409.
[102] 王宇, 严鹏志, 范鹏贤. 岩土中爆炸冲击荷载的落锤模拟试验研究 [J]. 陆军工程大学学报, 2023, 2(6): 60–67. DOI:
10.12018/j.issn.2097-0730.20230525001.
WANG Y, YAN P Z, FAN P X. Physical simulation of explosion impact load in geomaterials by drop hammers [J]. Journal
of Army Engineering University of PLA, 2023, 2(6): 60–67. DOI: 10.12018/j.issn.2097-0730.20230525001.
[103] 李腾飞, 钟冬望, 何理, 等. 基于落锤-弹簧碰撞系统的燃气爆炸载荷模拟加载方法研究 [J]. 力学与实践, 2024, 46(4):
796–802. DOI: 10.6052/1000-0879-23-461.
LI T F, ZHONG D W, HE L, et al. Research on gas explosion load simulation loading method based on drop weight-spring
collision system [J]. Mechanics in Engineering, 2024, 46(4): 796–802. DOI: 10.6052/1000-0879-23-461.
[104] 程帅, 陈博, 刘文祥, 等. 基于落锤实验平台的爆炸载荷模拟装置原理性设计 [J]. 现代应用物理, 2016, 7(4): 041002.
DOI: 10.3969/j.issn.2095-6223.2016.04.010.
CHENG S, CHEN B, LIU W X, et al. Theoretical design of an explosive loading analogue device based on drop hammer test
system [J]. Modern Applied Physics, 2016, 7(4): 041002. DOI: 10.3969/j.issn.2095-6223.2016.04.010.
[105] 任佳, 刘小川, 杨建波, 等. 防雷座椅台架试验冲击波形模拟技术 [J]. 科学技术与工程, 2020, 20(33): 13673–13679. DOI:
10.3969/j.issn.1671-1815.2020.33.023.
REN J, LIU X C, YANG J B, et al. Waveform simulation technology for drop test of the mine protected seat [J]. Science
Technology and Engineering, 2020, 20(33): 13673–13679. DOI: 10.3969/j.issn.1671-1815.2020.33.023.
[106] BOSCH K, HARRIS K, CLARK D, et al. Blast mitigation seat analysis-drop tower data review: SAE Technical Paper 2024-
01-3496 [R]. Warren, Michigan, USA: SAE, 2014: 2. DOI: 10.4271/2024-01-3496.
[107] CHENG M, DIONNE J P, MAKRIS A. On drop-tower test methodology for blast mitigation seat evaluation [J]. International
Journal of Impact Engineering, 2010, 37(12): 1180–1187. DOI: 10.1016/j.ijimpeng.2010.08.002.
[108] 傅耀宇, 牛善田, 闫际宇, 等. 模拟爆炸冲击载荷的防雷座椅跌落试验研究 [J]. 兵器装备工程学报, 2023, 44(6): 154–160.
DOI: 10.11809/bqzbgcxb2023.06.021.

041101-19