Page 36 - 《爆炸与冲击》2026年第4期
P. 36

第 46 卷                 姚术健，等： 等效模拟爆炸加载试验技术研究进展                                  第 4 期

                     DOI: 10.1016/j.ijimpeng.2012.10.014.
               [55]   ZALESAK J F, POCHÉE L B. The shock test facility: an explosive-driven, water-filled conical shock tube [C]//Proceedings
                     of  a  Conference  Sponsored  by  the  Department  of  Defense,  the  National  Aeronautics  and  Space  Administration,  and  the
                     Department of Energy. Virginia Beach, 1989: 73–76.
               [56]   STEWART J B, PECORA C. Explosively driven air blast in a conical shock tube [J]. Review of Scientific Instruments, 2015,
                     86(3): 035108. DOI: 10.1063/1.4914898.
               [57]   STEWART  J  B.  Influence  of  explosively  driven  shock  tube  configuration  on  the  mid-field  blast  environment  [J].  AIP
                     Conference Proceedings, 2018, 1979(1): 160026. DOI: 10.1063/1.5045025.
               [58]   STEWART  J  B.  Approximating  a  free-field  blast  environment  in  the  test  section  of  an  explosively  driven  conical  shock
                     tube [J]. Shock Waves, 2019, 29(2): 355–360. DOI: 10.1007/S00193-018-0811-7.
               [59]   郑监, 卢芳云, 陈荣. 柱形装药条件下锥形水中爆炸激波管内的冲击波特性 [J]. 爆炸与冲击, 2021, 41(10): 103201. DOI:
                     10.11883/bzycj-2020-0316.
                     ZHENG J, LU F Y, CHEN R. Shock wave characteristics in a conical water explosion shock tube under cylindrical charge
                     condition [J]. Explosion and Shock Waves, 2021, 41(10): 103201. DOI: 10.11883/bzycj-2020-0316.
               [60]   张军, 黄含军, 王军评, 等. 炸药驱动式爆炸管的载荷计算 [J]. 装备环境工程, 2021, 18(5): 21–27. DOI: 10.7643/issn.
                     1672-9242.2021.05.004.
                     ZHANG  J,  HUANG  H  J,  WANG  J  P,  et  al.  Simulation  on  the  blast  load  inside  the  explosively  drived  shock  tube  [J].
                     Equipment Environmental Engineering, 2021, 18(5): 21–27. DOI: 10.7643/issn.1672-9242.2021.05.004.
               [61]   GUO Q P, YANG S J, WANG Y C, et al. Prediction research for blasting peak particle velocity based on random GA-BP
                     network group [J]. Arabian Journal of Geosciences, 2022, 15(15): 1351. DOI: 10.1007/s12517-022-10615-3.
               [62]   陈梓薇, 王仲琦, 曾令辉. 基于    BP  神经网络的爆炸用激波管峰值压力预测方法 [J]. 爆炸与冲击, 2024, 44(5): 054101.
                     DOI: 10.11883/bzycj-2023-0187.
                     CHEN Z W, WANG Z Q, ZENG L H. A method for predicting peak pressure in an explosion shock tube based on BP neural
                     network [J]. Explosion and Shock Waves, 2024, 44(5): 054101. DOI: 10.11883/bzycj-2023-0187.
               [63]   KANG Y, WANG J L, ZHANG S Z, et al. A review of the development of shock tubes for simulating blast waves [C]//2023
                     IEEE  16th  International  Conference  on  Electronic  Measurement  &  Instruments  (ICEMI).  Harbin:  IEEE,  2023:  416–425.
                     DOI: 10.1109/ICEMI59194.2023.10269910.
               [64]   SKOTAK  M,  ALAY  E,  CHANDRA  N.  On  the  accurate  determination  of  shock  wave  time-pressure  profile  in  the
                     experimental models of blast-induced neurotrauma [J]. Frontiers in Neurology, 2018, 9: 52. DOI: 10.3389/fneur.2018.00052.
               [65]   UY B, REMENNIKOV A, RITZEL D, et al. Development of the Australian National facility for physical blast simulation [C]//
                     12th International Conference on Shock & Impact Loads on Structures. Singapore, 2017: 15–16.
               [66]   LLOYD A, JACQUES E, SAATCIOGLU M, et al. Capabilities of a shock tube to simulate blast loading on structures [J].
                     Special Publication, 2011, 281: 1–20. DOI: 10.14359/51683611.
               [67]   LLOYD A, SAATCIOGLU M, PALERMO D. New shock tube testing facilities for simulated blast loading of structural and
                     non-structural components [C]//2nd International Workshop on Performance, Protection & Strengthening of Structures under
                     Extreme Loading. Hayama, 2009.
               [68]   CHANDRA  N,  GANPULE  S,  KLEINSCHMIT  N  N,  et  al.  Evolution  of  blast  wave  profiles  in  simulated  air  blasts:
                     experiment and computational modeling [J]. Shock Waves, 2012, 22(5): 403–415. DOI: 10.1007/s00193-012-0399-2.
               [69]   LEBLANC  J,  GARDNER  N,  SHUKLA  A.  Effect  of  polyurea  coatings  on  the  response  of  curved  E-glass/vinyl  ester
                     composite panels to underwater explosive loading [J]. Composites Part B: Engineering, 2013, 44(1): 565–574. DOI: 10.1016/
                     j.compositesb.2012.02.038.
               [70]   LEBLANC J, SHUKLA A. The effects of polyurea coatings on the underwater explosive response of composite plates [M]//
                     GOPALAKRISHNAN  S,  RAJAPAKSE  Y.  Blast  Mitigation  Strategies  in  Marine  Composite  and  Sandwich  Structures.
                     Singapore: Springer, 2018: 53–72. DOI: 10.1007/978-981-10-7170-6_3.
               [71]   LEBLANCD  J  M.  Response  of  composite  materials  to  dynamic  and  low  temperature  environments  [D].  Rhode  Island:
                     University of Rhode Island, 2019: 52–58. DOI: 10.23860/thesis-leblanc-james-2019.
               [72]   LEBLANC J, GAUCH E, JAVIER C, et al. The response of composite materials subjected to underwater explosive loading:
                     experimental and computational studies [M]//LEE S W. Advances in Thick Section Composite and Sandwich Structures: an


                                                         041101-17
   31   32   33   34   35   36   37   38   39   40   41