Page 200 - 《爆炸与冲击》2026年第4期

第 46 卷 王海生，等： 砂砾土中爆炸模型试验相似材料性能测试及配制方法 第 4 期

[14] 中华人民共和国住房和城乡建设部. 土工试验方法标准: GB/T 50123–2019 [S]. 北京: 中国计划出版社, 2019: 317–320.
Ministry of Housing and Urban-Rural Development of the Peopleʼs Republic of China. Standard for geotechnical testing
method: GB/T 50123–2019 [S]. Beijing: China Planning Press, 2019: 317–320.
[15] MENQ F Y. Dynamic properties of sandy and gravelly soils [D]. Austin: University of Texas at Austin, 2003.
[16] HASSAN N A, NGUYEN N S, MAROT D, et al. Consequences of scalping and scalping/replacement procedures on strength
properties of coarse-grained gap-graded soils [J]. Canadian Geotechnical Journal, 2022, 59(10): 1819–1832. DOI: 10.1139/
cgj-2021-0504.
[17] SHIN B. Effects of oversized particles on the dynamic properties of sand specimens evaluated by resonant column testing [D].
Austin: University of Texas at Austin, 2014.
[18] 胡哲, 朱俊高, 余挺, 等. 粗颗粒土级配混合法缩尺后力学性质变化规律研究 [J]. 能源与环保, 2017, 39(9): 37–41, 46.
DOI: 10.19389/j.cnki.1003-0506.2017.09.008.
HU Z, ZHU J G, YU T, et al. Changing laws of mechanical properties of coarse grained soil after mixed scaling [J]. China
Energy and Environmental Protection, 2017, 39(9): 37–41, 46. DOI: 10.19389/j.cnki.1003-0506.2017.09.008.
[19] US Department of the Army. Fundamentals of protective design for conventional weapons: TM 5-855-1 [S]. Washington: US
Department of the Army, 1986.
[20] 胡恒山. 拉梅常数的力学意义与剪切模量出现于纵波速度公式的原因 [J]. 地球物理学进展, 2018, 33(1): 219–222. DOI:
10.6038/pg2018BB0432.
HU H S. Note on the Lamé constant and the reason for the presence of the shear modulus in the compressional wave speed
formula [J]. Progress in Geophysics, 2018, 33(1): 219–222. DOI: 10.6038/pg2018BB0432.
[21] 顾晓强, 杨峻, 黄茂松, 等. 干砂弹性参数测定的弯曲-伸展元试验 [J]. 岩土力学, 2015, 36(S1): 220–224, 229. DOI: 10.16285/
j.rsm.2015.S1.037.
GU X Q, YANG J, HUANG M S, et al. Measurement of elastic parameters of dry sand using bender-extender element [J].
Rock and Soil Mechanics, 2015, 36(S1): 220–224, 229. DOI: 10.16285/j.rsm.2015.S1.037.
[22] 吴琪, 杨文保, 朱雨萌, 等. 砂-粉混合料小应变剪切模量弯曲元试验研究 [J]. 东南大学学报 (自然科学版), 2018, 48(6):
1059–1067. DOI: 10.3969/j.issn.1001-0505.2018.06.011.
WU Q, YANG W B, ZHU Y M, et al. Experimental study on small-strain shear modulus of sand-silt mixtures by bender
element testing [J]. Journal of Southeast University (Natural Science Edition), 2018, 48(6): 1059–1067. DOI: 10.3969/j.issn.
1001-0505.2018.06.011.
[23] 梁晓敏, 顾晓强, 翟崇朴, 等. 颗粒材料各向异性弹性波速与微观组构 CT 试验研究 [J]. 岩土工程学报, 2024, 46(7):
1398–1407. DOI: 10.11779/CJGE20230425.
LIANG X M, GU X Q, ZHAI C P, et al. Anisotropic wave velocities of granular materials and microscopic fabric using X-ray
computed tomography [J]. Chinese Journal of Geotechnical Engineering, 2024, 46(7): 1398–1407. DOI: 10.11779/
CJGE20230425.
[24] 陈云敏, 周燕国, 黄博. 利用弯曲元测试砂土剪切模量的国际平行试验 [J]. 岩土工程学报, 2006, 28(7): 874–880. DOI:
10.3321/j.issn:1000-4548.2006.07.013.
CHEN Y M, ZHOU Y G, HUANG B. International parallel test on the measurement of shear modulus of sand using bender
elements [J]. Chinese Journal of Geotechnical Engineering, 2006, 28(7): 874–880. DOI: 10.3321/j.issn:1000-4548.2006.
07.013.
[25] 吴琪, 李晓雪, 杨文保, 等. 细粒含量对饱和砂类土小应变剪切模量的影响 [J]. 哈尔滨工程大学学报, 2019, 40(7):
1297–1303. DOI: 10.11990/jheu.201805067.
WU Q, LI X X, YANG W B, et al. Influence of the fines content on the small-strain shear modulus characteristics of saturated
sandy soils [J]. Journal of Harbin Engineering University, 2019, 40(7): 1297–1303. DOI: 10.11990/jheu.201805067.
[26] VIGGIANI G, ATKINSON J H. Interpretation of bender element tests [J]. Géotechnique, 1995, 45(1): 149–154. DOI:
10.1680/geot.1995.45.1.149.
[27] JAMIOLKOWSKI M, LEROUEIL S, LO PRESTI D C. Design parameters from theory to practice [C]//Proceedings of the
International Conference on Geotechnical Engineering for Coastal Development. Yokohama: Port & Harbour Research
Institute, 1991(2): 877–917.
[28] HARDIN B O, BLACK W L. Sand stiffness under various triaxial stresses [J]. Journal of the Soil Mechanics and Foundations

045201-17