Page 89 - 《爆炸与冲击》2026年第3期

第 46 卷 郑贺龄，等： 带截顶内衬的高熵合金/Al/PTFE双层复合药型罩成型机理与毁伤特性 第 3 期

LIU M, MA D, SHAN H J, et al. Design of a double-layer biconical liner structure based on orthogonal optimization [J].
Ordnance Material Science and Engineering, 2025. DOI: 10.14024/j.cnki.1004-244x.20250519.007.
[26] 李昊, 尹建平, 毕广剑, 等. 截顶辅助双层药型罩射流成型影响研究 [J]. 兵器装备工程学报, 2022, 43(4): 31–35. DOI:
10.11809/bqzbgcxb2022.04.006.
LI H, YIN J P, BI G J, et al. Study on influence of top-cutting assisted double-layer liner jet forming [J]. Journal of Ordnance
Equipment Engineering, 2022, 43(4): 31–35. DOI: 10.11809/bqzbgcxb2022.04.006.
[27] 黄炳瑜, 熊玮, 张先锋, 等. 双层含能药型罩 K 装药射流成型及侵彻性能试验 [J]. 含能材料, 2021, 29(2): 149–156. DOI:
10.11943/CJEM2020231.
HUANG B Y, XIONG W, ZHANG X F, et al. Experimental study on jet formation and penetration performance of double-
layered reactive liners with K-charge [J]. Chinese Journal of Energetic Materials, 2021, 29(2): 149–156. DOI: 10.11943/
CJEM2020231.
[28] ZHENG H L, WANG Z X, WANG M Y, et al. Study on mechanical response and penetration mechanism of lightweight BCC
high-entropy alloy (Ti 2 Zr) 1.5 NbVAl 0.5 under extreme dynamic loads [J]. Intermetallics, 2025, 186: 108966. DOI: 10.1016/j.
intermet.2025.108966.
[29] ZHENG H L, WANG Z X, LI Z K, et al. Study on deformation mechanism and energy release characteristics of refractory
high-entropy alloy (Ti 2 Zr) 1.5 NbVAl 0.5 under different loading conditions [J]. Journal of Alloys and Compounds, 2025, 1018:
179031. DOI: 10.1016/j.jallcom.2025.179031.
[30] 周鑫, 冯彬, 陈力, 等. 活性射流侵彻-内爆作用下半无限混凝土靶中应力波效应 [J]. 含能材料, 2025, 33(7): 689–702.
DOI: 10.11943/CJEM2025079.
ZHOU X, FENG B, CHEN L, et al. Stress wave effect in semi-infinite concrete targets subjected to penetration-implosion
action of reactive jet [J]. Chinese Journal of Energetic Materials, 2025, 33(7): 689–702. DOI: 10.11943/CJEM2025079.
[31] HAO L K, GU W B, ZHANG Y D, et al. Damage of a large-scale reinforced concrete wall caused by an explosively formed
projectile (EFP) [J]. Defence Technology, 2023, 28: 280–297. DOI: 10.1016/j.dt.2022.11.003.
[32] LI W B, WANG X M, LI W B, et al. The effect of annular multi-point initiation on the formation and penetration of an
explosively formed penetrator [J]. International Journal of Impact Engineering, 2010, 37: 414–424. DOI: 10.1016/j.ijimpeng.
2009.08.008.
[33] SUN S J, JIANG J W, WANG S Y, et al. Structural design of the fluted shaped charge liner using multi-section optimization
method [J]. Defence Technology, 2023, 25: 249–262. DOI: 10.1016/j.dt.2023.01.008.
(责任编辑 张凌云)

031405-17