Page 76 - 《摩擦学学报》2020年第4期

486 摩 擦 学 学 报 第 40 卷

Discharge of debris

Lubricating oil Fibers

Silding direction Silding direction

(a) The initial stage (b) Circulation of lubricating oil

Friction film

Silding direction

(c) Generation of friction film

Fig. 14 Schematic diagram of the friction mechanism of paper-based friction materials in the rich oil state
图 14 纸基摩擦材料在富油状态下的摩擦机理示意图

擦材料的摩擦学性能，较高硬度的配副材料具有更好 10.11980/j.issn.0254-508X.2017.02.003.
的耐磨性，并有助于降低纸基摩擦材料的表面磨损和 [ 3 ] Wang Beibei, Lu Zhaoqing, Chen Jie. Friction and wear properties
of paper-based friction materials[J]. China Pulp & Paper, 2015,
破坏失效.
34(3): 25–30 (in Chinese) [王贝贝, 陆赵情, 陈杰. 纸基摩擦材料摩
b. 润滑油是调节纸基摩擦材料和不同配副材料
擦 磨 损 性 能 的 研 究 [J]. 中 国 造 纸 , 2015, 34(3): 25–30]. doi:
间摩擦磨损性能的重要介质，不仅可以使摩擦系数维
10.11980/j.issn.0254-508X.2015.03.006.
持在稳定的范围(0.13~0.14)内，同时显著抑制磨损和 [ 4 ] Lu Y. A combinatorial approach for automotive friction materials:
延长纸基摩擦材料的服役寿命. effects of ingredients on friction performance[J]. Composites
c. 纸基摩擦材料在无油状态下主要表现为黏着 Science and Technology, 2006, 66(3-4): 591–598. doi:
10.1016/j.compscitech.2005.05.032.
磨损、磨粒磨损和热疲劳磨损三种磨损形式，由疲劳
[ 5 ] Fu Yewei, Li Hejun, Li Kezhi, et al. Effect of carbon fiber on the
裂纹引发的纤维脱粘与拔出是导致材料失效的主要
friction and wear behavior of paper-based friction material[J].
原因；在富油状态下，润滑油能吸收大量的摩擦热并 Tribology, 2004, 24(6): 555–559 (in Chinese) [付业伟, 李贺军, 李
带走摩擦表面的磨屑，有效抑制了热磨损与磨粒磨损. 克智, 等. 炭纤维对纸基摩擦材料摩擦磨损性能的影响[J]. 摩擦学
参 考 文 献 学 报 , 2004, 24(6): 555–559]. doi: 10.3321/j.issn:1004-0595.2004.
06.016.
[ 1 ] Lu Zhaoqing, Chen Jie, Zhang Dakun. Influence of PEO and CPAM
[ 6 ] Fei J, Wang H K, Huang J F, et al. Effects of carbon fiber length on
on the formation of the base paper for paper-based friction the tribological properties of paper-based friction materials[J].
material[J]. China Pulp & Paper, 2013(2): 22–25 (in Chinese) [陆赵 Tribology International, 2014, 72: 179–186. doi: 10.1016/j.triboint.
情, 陈杰, 张大坤. PEO和CPAM对纸基摩擦材料原纸性能的影响 2013.12.017.
[J]. 中 国 造 纸 , 2013(2): 22–25]. doi: 10.11980/j.issn.0254-508X. [ 7 ] Fei Jie, Li Hejun, Fu Yewei, et al. Effect of reinforced fiber on the
2013.02.005. performance of paper-based friction material[J]. Lubrication
[ 2 ] Hu Wenjing, Lu Zhaoqing, Xie Yi, et al. Effects of the surface Engineering, 2010(10): 1–4 (in Chinese) [费杰, 李贺军, 付业伟, 等.
modification of fiber on mechanical properties of paper-based 增强纤维对纸基摩擦材料性能的影响[J]. 润滑与密封, 2010(10):
friction material[J]. China Pulp & Paper, 2017, 36(2): 12–17 1–4]. doi: 10.3969/j.issn.0254-0150.2010.10.001.
(in Chinese) [胡文静, 陆赵情, 谢璠, 等. 纤维表面改性对纸基摩擦 [ 8 ] Hu Jian, Liang Yun, Zheng Chisong, et al. The effect of resin
材料原纸强度性能的影响[J]. 中国造纸, 2017, 36(2): 12–17]. doi: content on the properties of wet paper-based friction material[J].