Page 195 - 《爆炸与冲击》2026年第8期
P. 195
第 46 卷 纪文涛,等: 氢气/钛粉两相体系爆炸强度参数的变化规律 第 8 期
Management of Energy Chemical Industry, 2024, 3(2): 1–9, 25.
[5] LIU Y F, ZHANG W X, ZHANG X, et al. Nanostructured light metal hydride: fabrication strategies and hydrogen storage
performance [J]. Renewable and Sustainable Energy Reviews, 2023, 184: 113560. DOI: 10.1016/j.rser.2023.113560.
[6] 李红玉, 樊运晓. 基于系统思考的 AL Solutions 粉尘爆炸事故分析 [J]. 安全与环境工程, 2016, 23(2): 90–95. DOI:
10.13578/j.cnki.issn.1671-1556.2016.02.018.
LI H Y, FAN Y X. Analysis of the dust explosion accident at AL Solutions based on system thinking [J]. Safety and
Environmental Engineering, 2016, 23(2): 90–95. DOI: 10.13578/j.cnki.issn.1671-1556.2016.02.018.
[7] LU Y W, FAN R J, WANG Z R, et al. The influence of hydrogen concentration on the characteristic of explosion venting:
explosion pressure, venting flame and flow field microstructure [J]. Energy, 2024, 293: 130562. DOI: 10.1016/j.energy.2024.
130562.
[8] WU H C, CHANG R C, HSIAO H C. Research of minimum ignition energy for nano titanium powder and nano iron powder [J].
Journal of Loss Prevention in the Process Industries, 2009, 22(1): 21–24. DOI: 10.1016/j.jlp.2008.10.002.
[9] ZHANG K, LUO T P, LI Y C, et al. Effect of ignition, initial pressure and temperature on the lower flammability limit of
hydrogen/air mixture [J]. International Journal of Hydrogen Energy, 2022, 47(33): 15107–15119. DOI: 10.1016/j.ijhydene.
2022.02.224.
[10] HAN H, MA Q F, QIN Z K, et al. Experimental study on combustion and explosion characteristics of hydrogen-air premixed
gas in rectangular channels with large aspect ratio [J]. International Journal of Hydrogen Energy, 2024, 57: 1041–1050. DOI:
10.1016/j.ijhydene.2024.01.125.
[11] YU J L, ZHANG X Y, ZHANG Q, et al. Combustion behaviors and flame microstructures of micro- and nano-titanium dust
explosions [J]. Fuel, 2016, 181: 785–792. DOI: 10.1016/j.fuel.2016.05.085.
[12] 董海佩, 程贵海, 李晓泉, 等. 钛粉尘云的爆炸特性 [J]. 中国粉体技术, 2018, 24(4): 32–36. DOI: 10.13732/j.issn.1008-
5548.2018.04.007.
DONG H P, CHENG G H, LI X Q, et al. Explosion characteristic of titanium dust cloud [J]. China Powder Science and
Technology, 2018, 24(4): 32–36. DOI: 10.13732/j.issn.1008-5548.2018.04.007.
[13] BOILARD S P, AMYOTTE P R, KHAN F I, et al. Explosibility of micron and nano-size titanium powders [J]. Journal of
Loss Prevention in the Process Industries, 2013, 26(6): 1646–1654. DOI: 10.1016/j.jlp.2013.06.003.
[14] 李畅. 微米及纳米钛粉爆炸特性参数的理论与实验研究 [D]. 沈阳: 东北大学, 2015.
LI C. Theoretical and experimental study on explosibility parameters of micro and nano titanium powders [D]. Shenyang:
Northeastern University, 2015.
[15] 李世周. 典型固体抑爆剂对 TiH 2 粉尘云燃爆特性影响及抑爆机理研究 [D]. 安徽淮南: 安徽理工大学, 2024. DOI: 10.
26918/d.cnki.ghngc.2024.000063.
LI S Z. Effects of typical solid suppressants on TiH 2 dust cloud explosion characteristics and explosion suppression
mechanism [D]. Huainan, Anhui, China: Anhui University of Science and Technology, 2024. DOI: 10.26918/d.cnki.ghngc.
2024.000063.
[16] TSAI Y T, HUANG G T, ZHAO J Q, et al. Dust cloud explosion characteristics and mechanisms in MgH 2 -based hydrogen
storage materials [J]. AIChE Journal, 2021, 67(8): e17302. DOI: 10.1002/AIC.17302.
[17] 王阳. 氢气/镁粉两相体系混合爆炸特性与机理研究 [D]. 河南焦作: 河南理工大学, 2023. DOI: 10.27116/d.cnki.gjzgc.
2023.000386.
WANG Y. Investigation on hybrid explosion characteristics and mechanism of hydrogen/magnesium dust two-phase system [D].
Jiaozuo, Henan, China: Henan Polytechnic University, 2023. DOI: 10.27116/d.cnki.gjzgc.2023.000386.
[18] TSAI Y T, FU T, ZHOU Q. Explosion characteristics and suppression of hybrid Mg/H 2 mixtures [J]. International Journal of
Hydrogen Energy, 2021, 46(78): 38934–38943. DOI: 10.1016/j.ijhydene.2021.09.145.
[19] CHENG Y F, SU J, LIU R, et al. Influential factors on the explosibility of unpremixed hydrogen/magnesium dust [J].
International Journal of Hydrogen Energy, 2020, 45(58): 34185–34192. DOI: 10.1016/j.ijhydene.2020.09.040.
[20] XIONG X Y, GAO K, MU J, et al. Experimental study on the explosion destructive ability of magnesium powder/hydrogen
hybrids in large space [J]. Process Safety and Environmental Protection, 2023, 173: 237–248. DOI: 10.1016/j.psep.
2023.02.091.
085401-9

