Page 111 - 《爆炸与冲击》2025年第6期

第 45 卷 蔚立元，等： 动态恒速剪切下砂岩粗糙结构面的力学行为及嗣后渗流特性 第 6 期

on strata separation and wing crack initiation [J]. Engineering Failure Analysis, 2022, 142: 106762. DOI: 10.1016/j.engfailanal.
2022.106762.
[27] 夏才初, 喻强锋, 钱鑫, 等. 常法向刚度条件下岩石节理剪切-渗流特性试验研究 [J]. 岩土力学, 2020, 41(1): 57–66, 77.
DOI: 10.16285/j.rsm.2018.2275.
XIA C C, YU Q F, QIAN X, et al. Experimental study of shear-seepage behaviour of rock joints under constant normal
stiffness [J]. Rock and Soil Mechanics, 2020, 41(1): 57–66, 77. DOI: 10.16285/j.rsm.2018.2275.
[28] 蒋宇静, 王刚, 李博, 等. 岩石节理剪切渗流耦合试验及分析 [J]. 岩石力学与工程学报, 2007, 26(11): 2253–2259. DOI:
10.3321/j.issn:1000-6915.2007.11.011.
JIANG Y J, WANG G, LI B, et al. Experimental study and analysis of shear-flow coupling behaviors of rock joints [J].
Chinese Journal of Rock Mechanics and Engineering, 2007, 26(11): 2253–2259. DOI: 10.3321/j.issn:1000-6915.2007.11.011.
[29] HUANG N, LIU R C, JIANG Y J. Numerical study of the geometrical and hydraulic characteristics of 3D self-affine rough
fractures during shear [J]. Journal of Natural Gas Science and Engineering, 2017, 45: 127–142. DOI: 10.1016/j.jngse.2017.
05.018.
[30] 蔚立元, 杨瀚清, 王晓琳, 等. 循环剪切作用下三维粗糙裂隙非线性渗流特性数值模拟研究 [J]. 岩土力学, 2023, 44(9):
2757–2766. DOI: 10.16285/j.rsm.2022.1524.
YU L Y, YANG H Q, WANG X L, et al. Numerical study on nonlinear hydraulic properties of three-dimensional rough joints
under cyclic shear conditions [J]. Rock and Soil Mechanics, 2023, 44(9): 2757–2766. DOI: 10.16285/j.rsm.2022.1524.
[31] KOYAMA T, NERETNIEKS I, JING L. A numerical study on differences in using Navier-Stokes and Reynolds equations for
modeling the fluid flow and particle transport in single rock fractures with shear [J]. International Journal of Rock Mechanics
and Mining Sciences, 2008, 45(7): 1082–1101. DOI: 10.1016/j.ijrmms.2007.11.006.
[32] 杜守继, 职洪涛, 周枝华. 岩石节理剪切过程中应力与渗流特性的数值模拟 [J]. 岩石力学与工程学报, 2008, 27(12):
2473–2481. DOI: 10.3321/j.issn:1000-6915.2008.12.012.
DU S J, ZHI H T, ZHOU Z H. Numerical simulation of stress and seepage properties of rock joint during shearing processes [J].
Chinese Journal of Rock Mechanics and Engineering, 2008, 27(12): 2473–2481. DOI: 10.3321/j.issn:1000-6915.2008.12.012.
[33] ZHOU J Q, WANG M, WANG L C, et al. Emergence of nonlinear laminar flow in fractures during shear [J]. Rock Mechanics
and Rock Engineering, 2018, 51(11): 3635–3643. DOI: 10.1007/s00603-018-1545-7.
[34] 刘日成, 尹乾, 杨瀚清, 等. 恒定法向刚度边界条件下三维粗糙节理面循环剪切力学特性 [J]. 岩石力学与工程学报, 2021,
40(6): 1092–1109. DOI: 10.13722/j.cnki.jrme.2020.1128.
LIU R C, YIN Q, YANG H Q, et al. Cyclic shear mechanical properties of 3D rough joint surfaces under constant normal
stiffness (CNS) boundary conditions [J]. Chinese Journal of Rock Mechanics and Engineering, 2021, 40(6): 1092–1109. DOI:
10.13722/j.cnki.jrme.2020.1128.
[35] 王培涛, 黄浩, 张博, 等. 基于 3D 打印的粗糙结构面模型表征及渗流特性试验研究 [J]. 岩土力学, 2024, 45(3): 725–736.
DOI: 10.16285/j.rsm.2023.0875.
WANG P T, HUANG H, ZHANG B, et al. Characterization of rough fracture model and the seepage characteristics based on
3D printing technology [J]. Rock and Soil Mechanics, 2024, 45(3): 725–736. DOI: 10.16285/j.rsm.2023.0875.
[36] JAVADI M, SHARIFZADEH M, SHAHRIAR K, et al. Critical Reynolds number for nonlinear flow through rough-walled
fractures: the role of shear processes [J]. Water Resources Research, 2014, 50(2): 1789–1804. DOI: 10.1002/2013WR01461.
[37] KOMVOPOULOS K, YE N. Three-dimensional contact analysis of elastic-plastic layered media with fractal surface
topographies [J]. Journal of Tribology, 2001, 123(3): 632–640. DOI: 10.1115/1.1327583.
[38] LI T, ZHANG Q, YIN Q, et al. Experimental study on the nonlinear flow characteristics of fractured granite after high-
temperature cycling [J]. Geomechanics and Geophysics for Geo-Energy and Geo-Resources, 2023, 9: 50. DOI: 10.1007/
s40948-023-00578-4.
(责任编辑 王小飞)

061422-17