Page 44 - 《摩擦学学报》2020年第5期

第 5 期 李平, 等: 回火温度对20Cr13不锈钢液固两相流冲刷腐蚀性能的影响 599

严重. 650 ℃回火的20Cr13不锈钢的组织中出现较大 steel at different locations of a 90° elbow[J]. Corrosion Science,
颗粒的碳化物，导致基体中Cr分布不均匀，耐腐蚀性 2016, 111: 72–83. doi: 10.1016/j.corsci.2016.05.004.
[ 7 ] Dong C F, Xiao K, Li X G, et al. Erosion accelerated corrosion of a
变差，又因为基体组织为索氏体，硬度较低，抗冲刷磨
carbon steel–stainless steel galvanic couple in a chloride solution[J].
损能力较弱，因而在料浆液和固体颗粒的冲刷腐蚀联
Wear, 2010, 270(1-2): 39–45. doi: 10.1016/j.wear.2010.09.004.
合作用下，试样表面出现了严重的腐蚀坑和剥落.
[ 8 ] Robert J K Wood. Erosion–corrosion interactions and their effect on
3 结论 marine and offshore materials[J]. Wear, 2006, 261(9): 1012–1023.
doi: 10.1016/j.wear.2006.03.033.
a. 20Cr13不锈钢经过1 030 ℃油淬，在250~700 ℃ [ 9 ] Huang Weijiu, He Haoran, Wang Zhenguo, et al. Cavitation and
回火，组织由马氏体转变为屈氏体、索氏体，钢中碳化 erosion behavior of tin brass in multiphase flow[J]. Tribology, 2018,
38(4): 410–416 (in Chinese) [黄伟九, 何浩然, 王振国, 等. 多相流
物颗粒变大；250 ℃硬度最高，随回火温度升高，硬度
作用下锡黄铜的空蚀-冲蚀行为[J]. 摩擦学学报, 2018, 38(4):
先稍微降低，回火温度高于500 ℃以后硬度快速下降.
410–416]. doi: 10.16078/j.tribology.2018.04.005.
b. 随回火温度升高，20Cr13不锈钢的自腐蚀电流
[10] Li Guangyu, Qi Senpeng, Yu Kewei, et al. Wear and corrosion
密度逐渐增大，250 ℃回火处理试样的耐腐蚀性能最 resistance of plasma source nitrided 2Cr13 martensitic stainless
好；不同回火温度20Cr13不锈钢在0.5M H SO +10% steel[J]. Materials for Mechanical Engineering, 2019, 43(4): 6–9, 34
2
4
石英砂料浆中的冲刷腐蚀特征表现为腐蚀作用强于 (in Chinese) [李广宇, 齐森鹏, 于克伟, 等. 等离子体源渗氮
冲刷作用，而冲刷强烈促进腐蚀，冲刷与腐蚀的交互 2Cr13马氏体不锈钢的耐磨与耐腐蚀性能[J]. 机械工程材料,
2019, 43(4): 6–9, 34]. doi: 10.11973/jxgccl201904002.
作用量占总冲刷腐蚀量的80%左右.
[11] Liu Zhengwu, Zhu Xiaogang, Sun Jing, et al. Microstructure and
c. 20Cr13不锈钢冲刷腐蚀后表面呈现出挤压锻
mechanical properties of 2Cr13 stainless steel using selective laser
打和犁削作用造成的凹坑和沟痕，250 ℃回火时试样
melting[J]. Applied Laser, 2019, 39(3): 411–415 (in Chinese) [刘正
冲刷腐蚀量最低，耐冲刷腐蚀性最好，表明采用适当 武, 朱小刚, 孙靖, 等. 激光选区熔化成形2Cr13不锈钢组织与力学
的回火温度可以显著改善20Cr13不锈钢的抗冲刷腐 性能研究[J]. 应用激光, 2019, 39(3): 411–415].
蚀磨损性能. [12] Shao Tianmin, Hua Meng, Tam Hon Yuen, et al. Impact wear
behavior of laser hardened hypoeutectoid 2Cr13 martensite stainless
参 考 文 献
steel[J]. Wear, 2003, 255(1-6): 444–455. doi: 10.1016/S0043-1648
[ 1 ] Wang Linqing, Zhou Yongtao, Wang Junjun, et al. Corrosion-wear (03)00417-4.
interaction behavior of TC4 titanium alloy in simulated seawater[J]. [13] Wang Pinghuai, Wang Bojian, Song Jingna, et al. Influence of
Tribology, 2019, 39(2): 206–212 (in Chinese) [王林青, 周永涛, 王 quenching temperature on microstructure and performance of 2Cr13
军军, 等. TC4钛合金在模拟海水中腐蚀-磨损交互行为研究[J]. stainless steel[J]. Hot Working Technology, 2008, 37(4): 71–73
摩 擦 学 学 报 , 2019, 39(2): 206–212]. doi: 10.16078/j.tribology. (in Chinese) [王平怀, 王伯健, 宋景娜. 淬火温度对2Cr13不锈钢组
2018086. 织和性能的影响[J]. 热加工工艺, 2008, 37(4): 71–73]. doi: 10.3969/
[ 2 ] Adnan, A N, K im, M H. Erosion wear on centrifugal pump casing j.issn.1001-3814.2008.04.023.
due to slurry flow[J]. Wear, 2016, 364-365: 103–111. doi: 10.1016/ [14] Yan Yinxia, Zhao Hongmin, Gong Xinyong, et al. Heat treatment of
j.wear.2016.07.005. 2Cr13 stainless steel valve body[J]. Heat Treatment, 2013, 28(6):
[ 3 ] Li P, Cai Q Z, Wei B K, et al. Failure analysis of the impeller of 35–38 (in Chinese) [严银霞, 赵洪敏, 宫心勇, 等. 2Cr13不锈钢阀
slurry pump used in zinc hydrometallurgy process[J]. Engineering 体的热处理[J]. 热处理, 2013, 28(6): 35–38]. doi: 10.3969/j.issn.
Failure Analysis, 2005, 13(6): 876–885. 1008-1690.2013.06.011.
[ 4 ] Rahul Tarodiya, Bhupendra K Gandhi. Experimental investigation [15] Zhu Xiangqun, Dai Qixun, Zhou Ming, et al. Effect of tempering
of centrifugal slurry pump casing wear handling solid-liquid temperature on stress-corrosion cracking and mechanical hysteresis
mixtures[J]. Wear, 2019, 434-435(15): 1–11. of 2Cr13 stainless steel[J]. Transactions of Materials and Heat
[ 5 ] Jin Haozhe, Yi Yuwei, Liu Xu, et al. Simulation and analysis of Treatment, 2009, 30(1): 11–14, 19 (in Chinese) [朱向群, 戴起勋, 周
erosion characteristics in flushing oil pipeline with liquid-solid phase 明, 等. 回火温度对2Cr13不锈钢应力腐蚀开裂和力学滞后的影响
fluids[J]. Tribology, 2016, 36(6): 695–702 (in Chinese) [金浩哲, 易 [J]. 材料热处理学报, 2009, 30(1): 11–14, 19].
玉微, 刘旭, 等. 液固两相流冲洗油管道的冲蚀磨损特性数值模拟 [16] Liu Yurong, Ye Dong, Yong Qilong, et al. Effect of heat treatment
及 分 析 [J]. 摩 擦 学 学 报 , 2016, 36(6): 695–702]. doi: 10.16078/ on microstructure and property of Cr13 super martensitic stainless
j.tribology.2016.06.005. steel[J]. Journal of Iron and Steel Research, International, 2011,
[ 6 ] Zeng L, Shuang S, Guo X P, et al. Erosion-corrosion of stainless 18(11): 60–66. doi: 10.1016/S1006-706X(11)60118-0.